aivlasoft

Hi, according to the forum rule #4 (see orange area at the top of each page) please sign your posts with your real first name. Thanks! Can you please verify whether the plan which you select and load does contain airway information or not? Can you send me this plan as an *.efbr file (EFB route)? I may be wrong but I think that you cannot select the route in your FMC before you have saved it from the EFBs save dialog. In other words, when you see the company route LEBLLEPA01 in your FMC before you have saved it in EFB, then it must be a previously saved route (where ever that route came from). I do not agree. I use this function almost every day. I create a flight plan in EFB, then press the Save button and save that route as PMDG rte-file. Then I go over to the "cockpit" and select it from the company routes window in the FMC. So no problems here on my side ...

Hi, according to the forum rule #4 (see orange area at the top of each page) please sign your posts with your real first name. Thanks! The category information is taken from the FSX BGL-files, it's based on the landing system equipment. Current navigation data (either Aerosoft or Navigraph) does not cover the category information. You can only select from the procedures which are provided by the navigation data provider, but - as mentioned above - there might be no correlation between the procedure and the indicated ILS category.

Hi all, Navigraph has released revision 2 for AivlaSoft's EFB. Please download this latest revision: http://www.navigraph.com/FmsDataManualInstall.aspx

Hi Jorge, It seems that you already have the demo license activated. That's OK so. The error message which appears means that the path to the navigation data is not correct. To fix this, open the menu "Extras - Settings", then select the tab "Navigation data" and enter the correct path to the navigation data. If you have installed the default data set which comes with the full installation, then you will find it in your FSX installation folder, below "AivlaSoft".

please read here: viewtopic.php?f=5&t=1555

Hi all, it seems that the EGLL data file in "AIRAC cycle 1401 Vers 1". contains some wrong lines which cause the DataProvider to a series of error messages. I will send a note to Navigraph so they can fix it. As a workaround you can manually change the file using any text editor like notepad.exe: 1) Quit DataProvider and DisplayUnit 2) Navigate to the file EGLL.txt which is located in [NavigationData]\AivlaSoft\SIDSTARS 3) Open the file for edit using notepad.exe (or similar program) 4) Search for the following two lines: FIX ILL10 LATLON -999 -999 FIX IRR10 LATLON -999 -999 5) Replace them with the following lines: FIX ILL10 LATLON N 51 28.07052 W 0 10.05684 FIX IRR10 LATLON N 51 28.8345 W 0 9.996 6) Save the file 7) Start the DataProvider and the DisplayUnit and load airport EGLL Hope this helps.

Frank, which window do you mean? Can you provide us a screenshot of that window?

@ Lukas, @ all, as you already might have seen, some days ago we have uploaded a new website. We hope you enjoy it. Some of our users have saved direct links to a certain page of the old website. If you would like to access these pages now you will get a 404 - file not found error in your browser. Please remove such old direct links and use the root URL "http://www.aivlasoft.com" now. Also for other websites I always recommend to only save root links. Just my two cents .

Hi all, It seems that the recently released full-setup 1.5.0 didn't copy/paste some important files to their required location. Finally the bug could be located and a new setup has been created. Please re-download the setup, run it again and retry then to start the DataProvider. http://www.aivlasoft.com/download/index.html Sorry for the inconvenience.

Hi all, the problem is the missing file "Runways.txt" on your computer. The file "Runways.txt" should be installed when running the EFB installer but as it looks the installer doesn't. Today (2014-01-06) I have uploaded a new full-setup which has been fixed. To fix it on your computer you can download the runways file herein and then copy/paste it into the following folder on your DataProvider's computer: C:\Users\[your username]\Documents\AivlaSoft\EFB\UserData After saving the file to that location please restart the DataProvider. Runways.txt

Hi Gus, is this error message a persistent problem or did you try again to run the installer since then? Please make sure that no other process/program is running when you run the installer, in any doubt restart your computer before you run the installer.

Hi, according to the forum rules, please sign your posts with your real first name. Thanks. The navigation files that come with the AivlaSoft EFB installer are not zipped. I must assume that the files you're talking of are from another source than AivlaSoft.

Hi Matthias, please verify whether the following option has been selected: DisplayUnit > Settings > Charts > Ground > "Show runway identifiers from navigation data".

Hi Frank, there is no possibility to insert an airway when you manually change your route. I suggest to use the ATS route description feature as described in the operations manual, section 5, page 8 and following. It's (in my opinion) the easiest way to create a route. There are also a lot of sources for such types of routes on the internet from where you could copy/paste these descriptions into the text box which is available at the bottom of the 'select route' dialog.

Hi Gus, did you run the installer with "right-mouse-click and then 'run as administrator'"? Don't worry because of the demo, the demo is the fully functional code so you don't have to re-install or install the update or anything else. As soon as you have purchased the license key, just enter the key (DataProvider's menu) and this will create a new license certificate on your computer which in fact turns your demo license into a fully licensed certificate.

Hi, it's located on the DataProvider's computer in the following folder: C:\Users\[username]\Documents\AivlaSoft\EFB\UserData

Hi, could you please send me all files which you can find in the logfiles folder on your PC to support@aivlasoft.com. Usually this is something like C:\Users\[username]\Documents\AivlaSoft\EFB\Logfiles. Thanks.

Hi, disconnections can have several causes. In the end it's due to the fact that the DisplayUnit does not reply to the DataProvider within the time frame which is defined in the settings. Now the question is why does the DU not reply within that time frame? This can be because of a network problem (too less throughput), or a performance bottleneck on that computer where the DU is running. Maybe you should try to switch on/off several programs or add-ons to figure out which program might be the cause?

Hi, Please try the following: - Open the installation and configuration manual, section 1, page 10. There you will see a screenshot of step 6. - Run the installer for the full setup again and when it comes to step 6, press the button "show details". - In the small window that opens, scroll down and search for the entry of the runways.txt file. There you will see whether the file has been written by the installer and you will also see where it has been written. If the file has been written by the installer but the DataProvider is telling that the file is missing, I must assume that another program on your computer (maybe any antivirus software or similar products) has removed it.

Hi Andy, You don't have to run the update over the full installation. The full installation always contains the latest updates. Please try the following: - Run the uninstaller from the Windows control panel (uninstall a program) - Download the 1.5.0 full setup from our website - Unzip the file and then run the unzipped installer Hope this helps.

Hi Frank, FS Global Real Weather writes a file current_weather.txt into the data\exchange\common subfolder of the installation folder of FS Global Real Weather. However, it does so only if the option is checked in the settings dialog of FS Global Real Weather (Tools ? Settings ? General ? Enable Data Exchange).

Hi Mark, hi Curt, I will rework this dialog with the next update 1.5.1. BTW, you don't have to select the path where FSX/P3D is installed, you have to select the folder where the corresponding simulator is saving its flight plans.

Thanks Si, the documents are in work already

Hi, please, according to the forum rules, sign your posts with your real first name. Thanks. It depends whether you have installed the default data set which comes with the full setup of version 1.5, or whether you have a subscription for either Aerosoft or Navigraph. With the 1.5 installer the navigation data will be saved as follows: "$SIM\AivlaSoft\Aerosoft NavDataPro", and/or "$SIM\AivlaSoft\Navigraph FMS Data" (where "$SIM" means the installation folder of your flight simulator) If you run the Aerosoft NavDataPro program, you must have a look there to figure out where you saved the data, same for Navigraph there you will also have to select a folder by yourself.

But it doesn't work with Windows 8.1 RT. That's what also a customer has reported some days before.