busychild Posted June 30, 2018 Share Posted June 30, 2018 Hi, i get errors while running the database builder: "Database creation finished with 6 warning(s) and/or 2 error(s). ...". The logfile shows some warnings about missing add-on.xml files but also the following errors: 2018-07-01 01:04:26.395 Debug : Start scanning 23156 files 2018-07-01 01:04:33.043 Debug : Navaids read: 22069 2018-07-01 01:04:33.045 Debug : Airspaces read: 46084 2018-07-01 01:04:33.046 Debug : Airports read: 24625 2018-07-01 01:04:33.048 Debug : Creating navaids repository ... 2018-07-01 01:04:33.488 Error : Der Objektverweis wurde nicht auf eine Objektinstanz festgelegt. 2018-07-01 01:04:33.554 Debug : Reading magdec.bgl OK 2018-07-01 01:04:33.554 Debug : Writing magvar.bin ... 2018-07-01 01:04:33.563 Debug : Writing magvar.bin OK 2018-07-01 01:04:33.564 Debug : Reading Navigraph FMS Data, cycle 1802 Rev 1 ... 2018-07-01 01:04:35.120 Debug : --> Merging simulator and navdata P3Dv4/NG 2018-07-01 01:04:35.124 Error : Die Datei "C:\Users\Florian\Documents\AivlaSoft\EFB2\Server\DbBuilder\Base\P3D4\comservices.bin" konnte nicht gefunden werden. 2018-07-01 01:04:36.045 Warning : Database creation finished with 6 warning(s) and/or 2 error(s). If i ignore the errors and start the server a message comes up: "Trying to verify demo license but could not reach any time server on the internet.". If i then click "ok" and enter my data again the license could be validated but a new error comes up "Could not read database due to errors. Please see the logfile." The serverLogfilter.txt contains the following error (which is much likely caused by the issue of the database builder): 2018-07-01 01:08:30.200 Debug : Loading database ... 2018-07-01 01:08:30.205 Error : Die Datei "C:\Users\Florian\Documents\AivlaSoft\EFB2\Server\DbBuilder\Ready\P3Dv4NG\airports.bin" konnte nicht gefunden werden. bei System.IO.__Error.WinIOError(Int32 errorCode, String maybeFullPath) bei System.IO.FileStream.Init(String path, FileMode mode, FileAccess access, Int32 rights, Boolean useRights, FileShare share, Int32 bufferSize, FileOptions options, SECURITY_ATTRIBUTES secAttrs, String msgPath, Boolean bFromProxy, Boolean useLongPath, Boolean checkHost) bei System.IO.FileStream..ctor(String path, FileMode mode, FileAccess access, FileShare share) bei z.z.g.u.g.nn(String A_0, Action`1 A_1) bei z.z.g.u.g.nn(String A_0, Action`1 A_1) bei z.z.z.g.i.m() 2018-07-01 01:09:04.463 Debug : Server settings saved to: C:\Users\Florian\Documents\AivlaSoft\EFB2\Server\Settings\serverSettings.txt 2018-07-01 01:09:04.465 Debug : ========== Terminated ========== PS: I attached the debug package. Any ideas? Best regards Florian Server_201807010111.txt.zip Quote Link to comment Share on other sites More sharing options...
ZKOKQ Posted June 30, 2018 Share Posted June 30, 2018 As above, same issues. The database tool works from within the server, but not stand alone Quote Link to comment Share on other sites More sharing options...
alpha117 Posted June 30, 2018 Share Posted June 30, 2018 Same issue 2018-07-01 00:43:26.092 Debug : Start scanning 51374 files 2018-07-01 00:51:25.944 Debug : Navaids read: 36148 2018-07-01 00:51:25.952 Debug : Airspaces read: 72952 2018-07-01 00:51:25.965 Debug : Airports read: 26485 2018-07-01 00:51:25.978 Debug : Creating navaids repository ... 2018-07-01 00:51:26.398 Error : Object reference not set to an instance of an object. 2018-07-01 00:51:26.518 Debug : Reading magdec.bgl OK 2018-07-01 00:51:26.524 Debug : Writing magvar.bin ... 2018-07-01 00:51:26.568 Debug : Writing magvar.bin OK 2018-07-01 00:51:26.594 Debug : Reading Navigraph FMS Data, cycle 1802 Rev 1 ... 2018-07-01 00:51:31.223 Debug : --> Merging simulator and navdata P3Dv4/NG 2018-07-01 00:51:31.257 Error : Could not find file 'C:\Users\Administrator\Documents\AivlaSoft\EFB2\Server\DbBuilder\Base\P3D4\comservices.bin'. 2018-07-01 00:51:32.670 Warning : Database creation finished with 1 warning(s) and/or 2 error(s). 2018-07-01 00:52:24.706 Debug : Server settings saved to: C:\Users\Administrator\Documents\AivlaSoft\EFB2\Server\Settings\serverSettings.txt 2018-07-01 00:52:24.718 Debug : ========== Terminated ========== 2018-07-01 00:52:24.724 Debug : Quote Link to comment Share on other sites More sharing options...
busychild Posted July 1, 2018 Author Share Posted July 1, 2018 19 minutes ago, ZKOKQ said: As above, same issues. The database tool works from within the server, but not stand alone For me it doesn‘t work - regardless of if i‘m starting the database builder from the server app or stand alone... Quote Link to comment Share on other sites More sharing options...
ZKOKQ Posted July 1, 2018 Share Posted July 1, 2018 3 minutes ago, busychild said: For me it doesn‘t work - regardless of if i‘m starting the database builder from the server app or stand alone... Yes, now it is the same for me. It is now going around an eternal loop. Not a good start. Quote Link to comment Share on other sites More sharing options...
ZKOKQ Posted July 1, 2018 Share Posted July 1, 2018 I am just trying the 1807 airac, copied over from EFBv1, and all good now. Must be problem with airac 1802. Still the Lic issue though 2018-07-01 12:09:55.579 Debug : ========== AivlaSoft.Efb.DbBuilder 2.0.50.0 started ========== 2018-07-01 12:09:55.618 Debug : Settings loaded from: C:\Users\Mick\Documents\AivlaSoft\EFB2\Server\Settings\serverSettings.txt 2018-07-01 12:09:56.038 Debug : Verify license ... 2018-07-01 12:09:59.267 Debug : Trial version running, trial will end in 29 days. 2018-07-01 12:10:15.665 Debug : --> Updating AIRAC cycle 2018-07-01 12:10:15.665 Debug : --> Database P3Dv4.NG-1802/R1 2018-07-01 12:10:15.669 Debug : Reading Navigraph FMS Data, cycle 1807 Rev 1 ... 2018-07-01 12:10:18.295 Debug : Reading P3Dv4 data ... 2018-07-01 12:10:24.524 Debug : --> Merging simulator and navdata P3Dv4/NG 2018-07-01 12:10:24.538 Debug : COM services and airspaces copied 2018-07-01 12:10:25.287 Debug : Adding additional waypoints ... 2018-07-01 12:10:27.638 Debug : Verifying airways data ... 2018-07-01 12:10:28.895 Debug : Verifying procedures data ... 2018-07-01 12:10:35.217 Debug : Creating runway mapping table 2018-07-01 12:10:35.954 Debug : Runway mappings created for 1126 airports. See C:\Users\Mick\Documents\AivlaSoft\EFB2\Server\Logfiles\runwayMappings_P3Dv4-NG.txt 2018-07-01 12:10:35.968 Debug : Getting ILS categories 2018-07-01 12:10:36.674 Debug : Getting ARINC magvar 2018-07-01 12:10:37.888 Debug : Writing cycleInfo.txt ... 2018-07-01 12:10:37.894 Debug : Applying data changes ... 2018-07-01 12:10:38.204 Debug : Writing airports.bin ... 2018-07-01 12:10:40.317 Debug : Compressing airports.bin ... 2018-07-01 12:10:44.063 Debug : Writing airways.bin ... 2018-07-01 12:10:44.121 Debug : Writing navaids.bin ... 2018-07-01 12:10:44.460 Debug : Merging simulator and navdata OK 2018-07-01 12:10:44.529 OK : Database creation successfully finished. 2018-07-01 12:18:15.004 Debug : Server settings saved to: C:\Users\Mick\Documents\AivlaSoft\EFB2\Server\Settings\serverSettings.txt 2018-07-01 12:18:15.014 Debug : ========== Terminated ========== 2018-07-01 12:18:15.014 Debug : Quote Link to comment Share on other sites More sharing options...
lonewulf47 Posted July 1, 2018 Share Posted July 1, 2018 Gentlemen, you certainly understand that we cannot provide a 24-hours service ?. It's now 2:56 AM here in Switzerland. You will have to wait for Urs to come online on Sunday, July 1st, to provide assistance for these errors in database building. As far as the reported Warning messages about missing "Add-on.xml" files are concerned, there seems to be a problem within the installation of add-ons into P3D V4's package system. This is beyond EFB v2 influence. An improper (or manually changed) installation can cause havoc if not strictly adhered to the rules outlined by Lockheed Martin's SDK http://www.prepar3d.com/SDKv4/sdk/add-ons/add-on_packages.html. Neverhteless EFB v2's functions are not affected. The respective airport ground map will simply show the default layout. Quote Link to comment Share on other sites More sharing options...
ZKOKQ Posted July 1, 2018 Share Posted July 1, 2018 1 minute ago, lonewulf47 said: Gwntlemen, you certainly understand that we cannot provide a 24-hours service ?. It's now 2:56 AM here in Switzerland. You will have to wait for Urs to come online on Sunday, July 1st, to provide assistance for these errors in database building. As far as the reported Warning messages about missing "Add-on.xml" files are concerned, there seems to be a problem within the installation of add-ons into P3D V4's package system. This is beyond EFB v2 influence. An improper (or manually changed) installation can cause havoc if not strictly adhered to the rules outlined by Lockheed Martin's SDK http://www.prepar3d.com/SDKv4/sdk/add-ons/add-on_packages.html. Neverhteless EFB v2's functions are not affected. The respective airport ground map will simply show the default layout. Was not expecting an answer straight away Oskar. All good now though using airac 1807. I did not have the addon.xml error though, but would be a good idea for the OP to download Lorby's xml app and that will check for errors. Quote Link to comment Share on other sites More sharing options...
lonewulf47 Posted July 1, 2018 Share Posted July 1, 2018 20 minutes ago, ZKOKQ said: Was not expecting an answer straight away Oskar. All good now though using airac 1807. I did not have the addon.xml error though, but would be a good idea for the OP to download Lorby's xml app and that will check for errors. Be careful with any add-ons that manipulate the scenery_add-ons.xml and scenery.cfg. We still recommend to use the standard installation method using Lockheed Martin's package system. Addons like Lorby's Organizer or SceneryConfigEditor may work the way it is intended, however be advised that whenever they edit one of the mentioned files, EFB v2 will ask you to rebuild the database. Quote Link to comment Share on other sites More sharing options...
hrsemn Posted July 1, 2018 Share Posted July 1, 2018 I am having the same exact problem only with FSX-SE. Please help. RYAN Quote Link to comment Share on other sites More sharing options...
lonewulf47 Posted July 1, 2018 Share Posted July 1, 2018 1 hour ago, hrsemn said: I am having the same exact problem only with FSX-SE. Please help. RYAN ... Hi Ryan, Is this screenshot from the first run to create the database after initial Installation? Are you sure you followe EXACTLY the procecures laid down in the various User Guides? I see that you are in the "Update Simulator" tab.When creating a database for the first time you should be in the "Create/Select Database" tab. Quote Link to comment Share on other sites More sharing options...
lonewulf47 Posted July 1, 2018 Share Posted July 1, 2018 STOP STOP STOP ! Please make sure that you follow EXACTLY the procedures laid down in the Installation- and Quickstart Guide. More thorough information about the database building process can also be found in the Database guide. Please do also not do anything that is not explicitly recommended by AivlaSoft to avoid initial errors. We have checked the installers many time before release and we did not encounter any of the reported errors. We will have to analyse the reports to see what exactly caused these reports. Furthermore we would like to remind you to our Forum Rules, where it is mandatory to sign your posts with your (at least first) real name. Please also state in your reports the Simulator(s) used and whether EFB v2 is installed in the default path. We will do our best to solve the encountered problems but we will of course also require as much information about your installation. Thank you for your understanding. Quote Link to comment Share on other sites More sharing options...
ahuimanu Posted July 1, 2018 Share Posted July 1, 2018 First, the Database Builder throws "Error: Object reference not set to an instance of an object" just after creating the navaids repository and before reading magdec.bgl The next error is: "Error: Could not find file D:\jeff\Documents\AivlaSoft\EFB2\Server\DbBuilder\Base\P3D4\comservices.bin" This is where this chokes each time. EFB2 unusable at the moment. EFB is not installed in the default path. Thank you, Jeff Quote Link to comment Share on other sites More sharing options...
lonewulf47 Posted July 1, 2018 Share Posted July 1, 2018 22 minutes ago, ahuimanu said: comservices.bin is not installed in D:\jeff\Documents\AivlaSoft\EFB2\Server\DbBuilder\Base This is where this chokes each time. EFB2 unusable at the moment. EFB is not installed in the default path. Thank you, Jeff Very strange. I just deleted my database and let EFB v2 rebuild the new database from scratch. I don't see any such behaviour. What Simulator and OS are you running? Quote Link to comment Share on other sites More sharing options...
ahuimanu Posted July 1, 2018 Share Posted July 1, 2018 4 minutes ago, lonewulf47 said: Very strange. I just deleted my database and let EFB v2 rebuild the new database from scratch. I don't see any such behaviour. What Simulator and OS are you running? Hello, Windows 10 and Prepar3d 4.3 Jeff Quote Link to comment Share on other sites More sharing options...
lonewulf47 Posted July 1, 2018 Share Posted July 1, 2018 9 minutes ago, ahuimanu said: Hello, Windows 10 and Prepar3d 4.3 .... Jeff Ok I see. Thanks, Jeff, for the info. Could you do me a favour and de- and reinstall EFB v2 to its default path and check and report again? Should be a matter of a few minutes. Although we have also checked remote installs I would like to make sure where this strange behaviour stems from. Quote Link to comment Share on other sites More sharing options...
ahuimanu Posted July 1, 2018 Share Posted July 1, 2018 Hello Oskar, Thank you. I have already done this a few times earlier based on your reply to another user. Thus, regardless of whether I have it installed in Program Files, or elsewhere, the behavior is the same. It is the problem reported by the OP (error messages look identical save for language localization). Thank you, Jeff Quote Link to comment Share on other sites More sharing options...
lonewulf47 Posted July 1, 2018 Share Posted July 1, 2018 Oh, and just another thought: wnat kind of AV software do you use? Could it be that the AV software deletes this "comservice.bin" upon creation? It wouldn't be the first time that AV software play havoc with binary files (not only in EFB) by deleting it without any warning. Quote Link to comment Share on other sites More sharing options...
ahuimanu Posted July 1, 2018 Share Posted July 1, 2018 Both malwarebytes and windows defender. When would comservice.bin be installed? Quote Link to comment Share on other sites More sharing options...
lonewulf47 Posted July 1, 2018 Share Posted July 1, 2018 3 minutes ago, ahuimanu said: Hello Oskar, Thank you. I have already done this a few times earlier based on your reply to another user. Thus, regardless of whether I have it installed in Program Files, or elsewhere, the behavior is the same. It is the problem reported by the OP (error messages look identical save for language localization). Thank you, Jeff Yes, I see the messages being identical, however this "comservices.bin" file is created within the database building process. Therefore it is hardly believeable that it simply "disappears"...? Quote Link to comment Share on other sites More sharing options...
ahuimanu Posted July 1, 2018 Share Posted July 1, 2018 Hello Oskar, Thank you. I understand. Perhaps both the OP and I are experiencing the same problem? Thank you, Jeff Quote Link to comment Share on other sites More sharing options...
lonewulf47 Posted July 1, 2018 Share Posted July 1, 2018 4 minutes ago, ahuimanu said: Hello Oskar, Thank you. I understand. Perhaps both the OP and I are experiencing the same problem? Thank you, Jeff Yes. possible. In any case Windows Defender is not responsible for that as I use it here too. Could you possibly create an exception for the "comservices.bin" file in your malwarebytes application to check? It is very strange that this file should disappear "just like this". So far I have never seen happening this and when I recreate my database I don't see any problems with that file either. In any case we will have to wait for Urs to "come alive" here. He has more insight as to when exactly the file is created and under what conditions. Quote Link to comment Share on other sites More sharing options...
ahuimanu Posted July 1, 2018 Share Posted July 1, 2018 Thank you Oskar, I re-ran everything without MalwareBytes or Defender running and behavior is not different. Thank you for working with me and perhaps Urs can make it better. Jeff Quote Link to comment Share on other sites More sharing options...
lonewulf47 Posted July 1, 2018 Share Posted July 1, 2018 11 minutes ago, ahuimanu said: Thank you Oskar, I re-ran everything without MalwareBytes or Defender running and behavior is not different. Thank you for working with me and perhaps Urs can make it better. Jeff Ok, thanks for info. Gotta get some sleep now after this "night shift" ? I'm sure Urs will be around soon to take over to solve the problems. Quote Link to comment Share on other sites More sharing options...
Bexxs75 Posted July 1, 2018 Share Posted July 1, 2018 Same Error ? with or without antivirus protection. Also i have created an exception and the Folder would not being monitored by ESET Antivirus. I attached the Log files. Maybe they would be useful to find the error. dbBuilderLogfile.txt serverLogfile.txt Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.