Frequencies don't change on the EFB

[Titty]

Hello everyone

 

My name is Thierry. I come back flying on simulators after 10 years of real flights.

 

First of all, congretulations to Aivlasoft for all this uncredible work. However, I have a problem with the radios:

- When my EFB radio panel is open, in COM1 (or COM2), an active frequency and a stand-by frequency are visible. When I make my frequency choice by double clicking on one of the frequencies below or even when I enter a frequency manually in the box, it shows up in the box as a transfer for half a second and that frequency reverts to the original frequency.

 

It is therefore impossible to change the frequency to a new one. The frequency change does no more appear in the VHF of the Airbus three 20 Neo (all this with or without Vpilot connection).

 

Thank you very much for your help and thank you again for all the work you do for our pleasure.

 

Have nice flights

 

Thierry

 

MSMF2020

FCUIP7

EFB v2

All updates ok

[Titty]

On 11/27/2020 at 10:52 PM, Titty said:

Hello everyone

 

My name is Thierry. I come back flying on simulators after 10 years of real flights.

 

First of all, congretulations to Aivlasoft for all this uncredible work. However, I have a problem with the radios:

- When my EFB radio panel is open, in COM1 (or COM2), an active frequency and a stand-by frequency are visible. When I make my frequency choice by double clicking on one of the frequencies below or even when I enter a frequency manually in the box, it shows up in the box as a transfer for half a second and that frequency reverts to the original frequency.

 

It is therefore impossible to change the frequency to a new one. The frequency change does no more appear in the VHF of the Airbus three 20 Neo (all this with or without Vpilot connection). I added a video, Download and  read it with VLC.

 

Thank you very much for your help and thank you again for all the work you do for our pleasure.

 

Have nice flights

 

Thierry

 

MSMF2020

FCUIP7

EFB v2

All updates ok

 

[aivlasoft]

Hi Thierry,

 

welcome back and thank you very much for your good words on EFB.

 

You might have overlooked the announcement about the MSFS integration and the known issues as per today.

Please go to this post and scroll down to the section 'known issues' where you can see that setting COM frequencies is currently not possible.

https://forum.aivlasoft.com/topic/4655-microsoft-flight-simulator-msfs-integration/?do=findComment&comment=25568

 

 

 

[Titty]

Good evenig,

 

Thank you for your fast answer. I fisrt excuse myself for overlook, I indeed saw this information but I didn,t make the link.

So that, how can I do to handle a flight connected with Vpilot without radio? Maybe I do something wrong, the other pilots are still flying even with this issue.

 

Thank's for explain if there is another way to by-pass this.

 

[KiloJuliett]

To make vPilot changing frequencies, use the command ".com1 [FREQUENCY]". I don't know if the sync between vPilot and MSFS works. But I think it should. Then you can simply change the frequencies in your aircraft and vPilot will detect this change.