mmaier41

Hi Urs, with exe.xml will not load SimpleCam (32bit) but works well by outside access for Simulator P3D V4 The following is from Prepar3D Learning Center Add-on Compilation Settings For add-on libraries and executables, it is recommended that all software add-ons be developed using Visual Studio 2015. Further, the Platform Toolset should be set to v140 and the Targeted Framework should be .NET Framework Version 4.6.2. These settings will help ensure consistency and compatibility for all new development. Regards Manfred Maier

That`s right. Regards Manfred Maier

This link can maybe help you.

Maybe you should delete them.

Also read the EFB Operations Manual Page 16...

The same problem here. Look at: http://www.navigraph.com/forum/viewtopic.php?f=30&t=4300#p18613 Manfred Maier

Sehr geehrter Herr Schwarz, Sie sind sicherlich nicht der 1te der Mega Airport Frankfurt 2.0 installiert hat und mit EFB sehr gut zurecht kommt. Prüfen Sie doch eimal Ihre Scenery.cfg die ist in C:\ProgramData\Microsoft\FSX enthalten, so ähnliche Einträge wie folgt sollten Sie finden: ------------------------------------------------------------------------------- Title=Mega Airport Frankfurt 2.0 Terrain Local=C:\Program Files (x86)\Microsoft Games\Microsoft Flight Simulator X\Aerosoft\\Mega Airport Frankfurt 2.0 Terrain Title=Mega Airport Frankfurt 2.0 Airport Local=C:\Program Files (x86)\Microsoft Games\Microsoft Flight Simulator X\Aerosoft\\Mega Airport Frankfurt 2.0 Airport -------------------------------------------------------------------------------- Ich schreibe in deutsch, da ich meine solche Aussagen wie " any circumstances. " oder "a solution very soon" sind wenn man Hilfe benötigt nicht angebracht. Manfred Maier

Hi Juergen, i have hat the similar problem i solved this in the way 1. check your Aivla WPNAVAPT.txt (AIRAC cycle :1612 Vers.1) if you see TAMPA INTL KTPA01L11002007 27.963294 -82.542356108.9000700026 TAMPA INTL KTPA01R08300007 27.964311 -82.528992111.9500700026 TAMPA INTL KTPA10 06999097 27.970789 -82.534542000.0009700026 TAMPA INTL KTPA19L08300187 27.987128 -82.528214110.3018700026 TAMPA INTL KTPA19R11002187 27.993539 -82.541328108.5018700026 TAMPA INTL KTPA28 06999277 27.970247 -82.514417000.0027700026 then all runways are there, you d'not need the correction in Runways.txt 2. Remove this from Aivla Runways.txt file KTPA 09 10 KTPA 18L 19L KTPA 18R 19R KTPA 27 28 KTPA 36L 01L KTPA 36R 01R 3. In EFB DataProvider -Data - make a "Simulator scenery data update" 4. In EFB DiplayUnit - System - Setting - Miscellaneous - make a "Reset airport data cache"

Hi Javier, AivlaSoft.Efb.DateProvider.exe use .NET Framwork (4) check this, maybe there is a missing or faulty file.

Is it possible to show the Depart-Time or the Approach-Time for the AI-Traffic. I have my own airport with an ai-traffic configured with "Traffic360" and same times i like to operate my PMDG737NGX among the ai-traffic for a bit better realistic. I'm now with the FSX-SDK "Traffic toolbox" is this possible but i do not will the simconnect more stress as absolutely necessary.

Hi Urs, the case of upload limit has been cleared. In the PROFILE there are same areas and the Number 4 is the source where the upload limits are described and handled. AivlaSoft Support Forum → My control panel → Settings → Manage Attachments Number 4 = Manage Attachments points out... You have used 482.39KB of 500KB You have 5 attachments (96% used) Now can i delete all or same of my previous uploaded attachments. Thanks for your patience.

Hi Urs, thanks for the answer. How is the upload limit in total per user, i ask this because i have uploaded in the past same pictures.

Hi Urs, i have found on the last fly a small faulty display, not so important. The FF lbs/hr is 4 X greater and the Tmax [hm/m] correspondingly smaller. Another question: Why can i upload only 17.61KB? Regards Manfred Maier

Maybe there C:\Users\xxxx\Documents\AivlaSoft\EFB\Navdata

Hi Urs, the File C:\Program Files (x86)\Microsoft Games\Microsoft Flight Simulator X\FlightBeam\KSFOHD\scenery\KSFOHD.bgl is wrong. I have this with ADE corrected and now looks good. Maybe there is a update at FlightBeam (i have not searched for) ? I have now learned, each Addon has his own strategy to handle the AIRAC data.

I'm not sure the wrong mapping seen before. In use: EFB 1.6.8.33245 AIRAC 1606 / Rev.1 C:\Program Files (x86)\Microsoft Games\Microsoft Flight Simulator X\FlightBeam\KSFOHD C:\Users\Karin\Documents\AivlaSoft\EFB\Navdata\Navigraph FMS Data\NavData\WPNAVAID.txt = OK C:\Users\Karin\Documents\AivlaSoft\EFB\Navdata\Navigraph FMS Data\NavData\WPNAVAPT.txt = OK PRO-ATC/X 1.7.2.0 Here everything is Ok

Hi Yvan, i have the same wrong runway description. I'm using Aerosoft-Mega Airport Frankfurt. To correct this, go to C:\Users\xxxxxxxxx\Documents\AivlaSoft\EFB\UserData\Runways.txt and delete the part EDDF. Then make in the DataProvider a "Simulater scenery data update" is a submenu of "Data". This has worked for me.

Hi Don, i also use EFB-Modules-Library for show same charts. I'm doing this with Navigraph Charts 5 by print a chart as pdf-file. I don't know about the LINK you mentioned.

Hi Urs, there is nothing no accident, nor anything else. My normal Fly-Satus for FSX is with following ADDONS are active: LINDA for control Saitek X52 ASN for weather EFB for flyplane PRO ATC-X for ATC and pre-flyplane GTX groundservice Accufeel for noise and sametimes FS-FlightContol for Landing-Training ect. All this addone's where not involved (not loaded) when i have checked this behavior. I use two monitors M1=EFB and M2=FSX. This is not vital, i will handle this by myself. two mouse click. The Log shows two CLOSE-Situation. ********************************************************** 2016-05-03 22:33:41.464 Debug ------- SimpleCam started ------- *************** FSX gestartet jedoch Flug noch nicht gestartet System-Close [X] ***************** 2016-05-03 22:33:41.547 Debug Verify license 2016-05-03 22:33:42.510 Debug License successfully verified 2016-05-03 22:33:42.571 Debug Waiting for running simulator process ... 2016-05-03 22:33:48.116 Debug Connection to simulator is established 2016-05-03 22:34:18.355 Debug Simulator terminated by user [X] ******** OK ******* 2016-05-03 22:34:18.384 Debug *** SimpleCam terminated 2016-05-03 22:34:18.405 Debug 2016-05-03 22:34:43.121 Debug ------- SimpleCam started ------- *************** FSX gestartet und Flug gestartet - Pause - System Close [X] ***************** 2016-05-03 22:34:43.198 Debug Verify license 2016-05-03 22:34:44.184 Debug License successfully verified 2016-05-03 22:34:44.249 Debug Waiting for running simulator process ... 2016-05-03 22:34:49.811 Debug Connection to simulator is established 2016-05-03 22:35:56.637 Warning DefWndProc (isConnected=true): Ausnahme von HRESULT: 0xC000014B [X] ********* nicht OK *********** 2016-05-03 22:36:29.877 Debug UnsubscribeSystemEvents: COMException raised: Ausnahme von HRESULT: 0xC000014B ***** SimpleCam User beendet ***** 2016-05-03 22:36:30.005 Debug *** SimpleCam terminated 2016-05-03 22:36:30.007 Debug

Hi, Urs and Oskar, i'm back again with the same problem. Same times will be closed most not. Otherwise i am very statisfied with the functionality specifically with the PMDG 737NGX.

Hi Oskar, many thanks for your answer "UAC set to the lowest level" this was OK "Properties Box set for "run as administator"" this was not set After a System-Restart it seems to be ok.

Hi, The Manual says: "SimpleCam is starting automatically with the respective option active and also automatically closed upon closing the simulator." No automatically closed by FSX on Windows 10. Where can i look for clearing this problem.

Hi, i'm back again with the solution. In the SID i have used SID SCRW05N RNW 05 TRK 049 UNTIL 410 instead of SID SCRW05N RNW 05 HDG 049 UNTIL 2000 this topic can be closed. Best Regards Manfred Maier

Hi, i have a SID Proplem with my own Airport EXXX. Depart goes west but should be direction east and visa versa. I'm using the same NAVDATA (SIDSTAR) EXXX.txt with PMDG and there the SID is ok. Also with PROATCX the SID is ok (EXXX,xml structure is different to EXXX.txt) All of the specified NAVDATA files are korrect modified Where is my mistake or is there a bug in this very usefull pice of software. I'm shourt before to buy a lisense, but this problem should be solved first. My workaround was to modify Runways.txt to EXXX 05 23 then the SID was ok, but my runway 05 was gone. Where and how can the direction goes false. The pictures showes the problem. Best regards Manfred Maier