agutz Posted June 7, 2012 Share Posted June 7, 2012 Hi, when I try to modify the departure for a flightplan having LFSB as departure the only runway selectable is 26. Navigraph's AIRAC is 12.6, but the problem was there already with 12.5. Is there anything I'm doing wrong? Regards, Andreas Link to comment Share on other sites More sharing options...
aivlasoft Posted June 8, 2012 Share Posted June 8, 2012 Hi Andreas, are you using stock scenery or third-party scenery? If you are using a third-party scenery you may check the content of the "runways.txt" file. With the default installation some entries for LFSB are already in there. By default the "runways.txt" file can be located in the following folder: C:\Users\[username]\Documents\AivlaSoft\EFB\UserData Link to comment Share on other sites More sharing options...
agutz Posted June 8, 2012 Author Share Posted June 8, 2012 Hi Urs, yes, for LFSB I am using the add-on scenery by France VFR. The runways.txt file has the following entries for runway designation changes: LFSB 08 08 LFSB 26 26 LFSB 16 15 LFSB 34 33 LFSB 16L 15R LFSB 34R 33L Regards, Andreas Link to comment Share on other sites More sharing options...
agutz Posted June 8, 2012 Author Share Posted June 8, 2012 Hi Urs, I just took the lines concerning LFSB out of the runways.txt file (assuming that these designator changes had been made already by FranceVFR). I now have SIDs for rwys 26, 33, 15 (not 08). Regards, Andreas Link to comment Share on other sites More sharing options...
aivlasoft Posted June 9, 2012 Share Posted June 9, 2012 Andreas, thanks for the good news. I just realized that when I wrote my post I forgot to mention that you should try to remove the lines, but I see you already did it . Link to comment Share on other sites More sharing options...
Recommended Posts