alpha117

. This has only happened since using FS2C, I've not flown any other plane other than the NGX since FS2C release Clive

Travis Yep, using latest SP

restarted 'data Provider' and they came back.......very strange, never had that before. Could this be a issue with FS2Crew?? I ask that because before using FS2Crew never had this issue Clive

Just powered up 'Super Traffic Board 3' just to see if the AI appear there and they do.

Morning All On a flight from EGBB>LEMD, not online. HAd AI traffic out of the UK and about over southern france noticed that the Traffic had gone off of the map in EFB. Checked 'AI aircraft monitor' and it is blank. AI is still appearing in the ND(PMDG 737). I'm using FS2Crew, if that helps. Advise please Thanks Clive

Travis Log files sent

I've the same issue, only in that if I just select an airport in EFB, with no flightplan. It is the same airport that I'm at in FSX, then my aircraft icon does not match where i'm at in fsx. If a load a flight plan in EFB all is OK. clive

Thanks Travis I'll get someone to make contact with Urs ASAP clive

I fly for a VA and we have our own online server for flying http://www.fsopen.co.uk/ EFB does not seem to connect and i don't get the moving map or see other online players can EFB connect to a server that is not VATSIM if so how Regards Clive

Well, what can I say LOXZ now has the correct runways 08L/26R and 26L/08R and it works in EFB to. All I did was get the data from here: http://www.the-airport-guide.com/airpor ... ts_id=6304 Added runway in ADE and thatwas it, well nearly. Travis/Urs, when I tried to add the LAT and LON in ADE the runway disappeared So all I've done it 'dragged it to were I think it should be. Any ideas thanks Clive

Well, I didn't think I could do that, just shows its not that difficult Right, now my next project is........ Aerosoft watchout........I wish Seriously I will TRY and sort out LOXZ (see other thread). If and it will be a big if I can do it I wll post the changed airport. Clive

I've just made the same changes in ADE to that was easy Right; now to read the manual, that would help Clive edit: AND is shows up now in EFB to

Travis many thanks, I've looked around for newer scenery but no luck

Hi Guys this is the errors from data provider. I have made the changes before on other airports to runways.txt. not sure about this one though Navdata runway ident 02 at airport LOXZ could not be assigned to Fsx runway Navdata runway ident 08R at airport LOXZ could not be assigned to fsx runway Navdata runway ident 08L at airport LOXZ as above Navdata runway ident 20 at airport LOXZ as above...saves me typing!! Navdate runway ident 26L at airport LOXZ as above Navdata runway ident 26R at Airport LOXZ as above Availble runways at this airport are as follows 08, 26 Thanks Clive

Thanks Urs Perhaps someone should tell the authors of this release

Travis Many thanks, as you say EFB can only read what is there. Anyway not a big deal. Justing making sure that you guys were aware Looking forward to V2 Clive

Guys I've noticed this a on a few airports that the dimensions are reported incorrectly with a 'zero' ( ie 940*0 meters) It's the 'zero' that is wrong btw I've just downloaded the new free airport from Orbx (CEJ4) and the reported dimensions on the ground chart are 940*0 meters It's the same if you go into the airport information/runways. PAKT is the same 2280*0 S43 is 810*0 and 770*0 KORS is 880*0 Looks like it is just Orbx airports Please advise Regards Clive

Star player, sir

Cheers Travis Clive

Guys just carried out a scenery update after installing new scenery, but they have not shown up in the airport selector. Here is the bit from the scenery update log 2012-02-02 13:24:11 Info Area LHS_LHDC_X, required=False, active=True, layer=639, path=C:\FSX\Addon Scenery\LHS_LHDC_X 2012-02-02 13:24:11 Info Area LHS_LHPP_X, required=False, active=True, layer=640, path=C:\FSX\Addon Scenery\LHS_LHPP_X Please advise Clive

Hi Travis If that is the case they would not appear as 'cargo' in the 'select a start position ' dropdown within FSX just a thought Clive

Its as simple as that when you know. Thanks for that Marc. I'll use that method today Clive

Thanks Marc

Ok, Just started another flight (two in a day ). EHAM>GCRR. Imported FP set cruise altitude to FL280. Started flight got to cruise altitude then I changed cruise to FL290 on route setup page and pressed active then in 'toolbox' pressed he 'adjust CRZ alt' button. It presses but CRZ still states FL280. I'm sure its operator error on my part and, I know it will be in the manual But why when I press the button in the tool box does nothing change. regards Clive

Hi Marc Just noticed it 'Adjust CRZ Alt' next to it there is a 'toggle button' from Mtrs to feet. So all that does is adjust as it says. Is this the same one that your're on about Also just noticed that if you load a flt plan and activate it then change the cruise Alt then the toolbox CRZ alt changes, which you would expect it to. Where I was coming from is that once you have started the flight(in the air) then go to the route setup screen to change the cruise altitude, then the 'tool box CRZ Alt' is not updated, it just states as per my previous post. Orginal set cruise alt+new alt in feet (FL320 +1142ft) Hope that's more clear clive