FlusiWolf Posted December 3, 2022 Share Posted December 3, 2022 Hello, I'm a long year user of EFB. Now I am trying to create a checklist for my Turbine Duke V2 in EFB 2. My questions: 1. How can I add another line for another item in the checklist editor (shortcut or another ? 2. As far as I can see (e.g. C172P.normal.txt) the checklists can contain more than 10 lines. However, only the first 10 lines are displayed for me. Does the basic settings have to be changed here and if so, where? Below is my testing checklist: // AivlaSoft EFB v2.x - www.aivlasoft.com // Checklist // // type: 0=title, 10=item, 20=conditionalItem, 99=endOfListItem // // 0 - title: type|name // 10 - item: type|index|role|challenge|response[|comment] // 20 - conditionalItem: type|index|role|condition // 99 - endOfListItem: type|index|role|challenge|response[|comment] 0|Before Start Engines 10|0|0|Cabin Door|CHECKED 10|1|0|Weight and CG|CHECKED 10|2|0|Flight Controls|CHECKED 10|3|0|Parking Brake|SET 10|4|0|Alternate static source|NORMAL 10|5|0|Landing gear handle|DOWN 10|6|0|Condition Levers|CUT OFF 10|7|0|Propeller Levers|HIGH RPM 10|8|0|Power Levers|IDLE 10|9|0|Battery Switch|ON 10|10!0|Fuel Selectors (L/R)|ON 10|11|0|ENG FUEL PRESS annunciators|ILLUMIN. 10|12|0|Left and right fuel pumps|SOUND, ILLUMIN. 10|13|0|ENG FUEL PRESS annunciators|CHECK OFF 10|14|0|Fuel Pressure|CHECK GREEN 10|15|0|Voltmeter|CHECK Best regards from Berlin Wolfgang Quote Link to comment Share on other sites More sharing options...
aivlasoft Posted December 5, 2022 Share Posted December 5, 2022 Hi Wolfgang Quote 1. How can I add another line for another item in the checklist editor (shortcut or another ? Press "Add Sibling", or "Add Child", depending on which kind of a new line shall be added. Make sure you have selected the proper element from which the "sibling" or "child" will be determined. Quote 2. As far as I can see (e.g. C172P.normal.txt) the checklists can contain more than 10 lines. However, only the first 10 lines are displayed for me. Does the basic settings have to be changed here and if so, where? There is no limitation of the line count and there are no basic settings to be changed, just press the above mentioned buttons and make sure the entire dialog is visible on your screen. Please also read the manual "5 DE Client.pdf", chapter 12.4 "Checklisten Editor". Quote Link to comment Share on other sites More sharing options...
FlusiWolf Posted December 5, 2022 Author Share Posted December 5, 2022 Hello Urs, thank you for the quick reply. There was a misunderstanding on my part about the term "sibling". It works well even if the checklist is more than 10 lines. One more quick question: Is there a shortcut for the "DONE" button, so that I can also use a joystick button to move forward in the checklist? Thank you for your help. Best regards Wolfgang Quote Link to comment Share on other sites More sharing options...
aivlasoft Posted December 6, 2022 Share Posted December 6, 2022 Hi Wolfgang all available shortcuts are listed in the Client settings dialog. As to my knowledge there is no shortcut for the DONE button. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.