LoveYui Posted August 16, 2016 Share Posted August 16, 2016 Here is what I try 1. manually add RKJB(Muan intl apt, Korea) scenery at P3D Scenery Library 2. Update Scenery Data in Dataprovider. 3. Install AIRAC 1608 navdata, Set Navdata folder route correctly. 4. try to Plan RKSS-RKJB Direct GPS, Displayunit says "Cannot find destination Airport with ICAO code RKJB" 5. Check Airport list in Displayunit, There is no RKJB in data. I check SIDSTAR data of RKJB in folder, Muan Intl data available in wpNAVAPT.txt What' Wrong with MY EFB? Link to comment Share on other sites More sharing options...
Jalacawa Posted August 17, 2016 Share Posted August 17, 2016 Good Afternoon Gentleman : When I try to put manually the ICAo airport , i received the following message : COULD NOT READY ROUTEFINDER ROUTE. THE FOLLOWING ERROR OCURRED: CANNOT FIND AIRPORT WITH ICAO CODE ='KLAX" Could you please help me with this issue. Thank you in advance. Sincerely JAIRO LARRARTE Link to comment Share on other sites More sharing options...
aivlasoft Posted August 17, 2016 Share Posted August 17, 2016 @HanulKim most probably the path to the scenery.cfg folder is not set properly. Therefore the DataProvider cannot read it and the database remains empty. @ Jairo, most probably the same issue as above. Link to comment Share on other sites More sharing options...
LoveYui Posted August 17, 2016 Author Share Posted August 17, 2016 @aivlasoft I check my path to scenery.cfg, It's correctly set to "C:\ProgramData\Lockheed Martin\Prepar3D v3". On Dataprovider Logfile, Dataprovider read data of RKJB Scenery Correctly and Folder was Analyzing. another reason for my error? Link to comment Share on other sites More sharing options...
aivlasoft Posted August 19, 2016 Share Posted August 19, 2016 HanulKim, can you please send me the logfiles (DataProvider and DisplayUnit) to support@aivlasoft.com. Maybe I can see therein a cause for the problem. BTW, according to the forum rules, please sign your posts with your real first name. Thanks. Link to comment Share on other sites More sharing options...
LoveYui Posted August 19, 2016 Author Share Posted August 19, 2016 I'm using my real name https://drive.google.com/open?id=0B-SYnVl6aDpiaE85Z2pQMU9HX28 here is my current Airport viewer status when search by ICAO CODE RKJB https://drive.google.com/open?id=0B-SYnVl6aDpiUUpNZk92UVpuQVU https://drive.google.com/open?id=0B-SYnVl6aDpiOW1yeXhNR0lwbEU Log Files, Thanks. Link to comment Share on other sites More sharing options...
aivlasoft Posted August 20, 2016 Share Posted August 20, 2016 Hanul Kim, from the logfiles I cannot see anything wrong so far. Can you verify that the folder structure of this add-on airport is consisting of a folder named "scenery" (e.g. C:\Prepar3D v3\Addon Scenery\rkjb\scenery\ ... ). It is a specification of FSX/P3D that BGL files must be located in a folder named "scenery". Link to comment Share on other sites More sharing options...
LoveYui Posted August 20, 2016 Author Share Posted August 20, 2016 Yes. Folder structure is correct and BGL files in Scenery folder. here is my RKJB Folder Structure https://drive.google.com/open?id=0B-SYnVl6aDpiX0ZYZDlCeURpT0U This airport made for FSX/P3D. so, RKJB is not default P3D airport dew to open in 2007. this is reason for my error? when I disable RKJB in Scenery Library, There is no RKJB in list. Can I add manaully airport in Displayunit airport list or database? I read operation Manual but there is nothing. Link to comment Share on other sites More sharing options...
aivlasoft Posted August 23, 2016 Share Posted August 23, 2016 Slowly I'm running out of ideas ... The folder structure seems to be ok. Have you ever tried to search for this airport using the city name, or using the filters on the right side for region and/or country? Maybe the airport is available with another ICAO code? Link to comment Share on other sites More sharing options...
LoveYui Posted August 23, 2016 Author Share Posted August 23, 2016 @aivlasoft Yes, I try to find region and contry. There is no rkjb in list. Well, I think is a scenery problem. When I using another scenery from same author, efb display scenery data via p3d default scenery not addon scenery. Thanks for the help Link to comment Share on other sites More sharing options...
LoveYui Posted August 24, 2016 Author Share Posted August 24, 2016 OK, I Fix my error. When I install ADE 1.70 and P3D SDK. open BGL files in ADE, recompile via P3D SDK and run Scenery data Update. All scenery data will correctly display on DisplayUnit. Link to comment Share on other sites More sharing options...
aivlasoft Posted August 25, 2016 Share Posted August 25, 2016 Thanks Hanul Kim for sharing this information. Link to comment Share on other sites More sharing options...
Recommended Posts