Petermuc3
Members-
Posts
92 -
Joined
-
Last visited
Everything posted by Petermuc3
-
Can I just install 1.6.14 on top of my current version 1.6.8.33244 and then on top 1.6.15? Thanks Peter
-
EFB for FSX and P3Dv4
Petermuc3 replied to Petermuc3's topic in EFB v1 (Read only, no longer supported)
Thank you, works well. I am a bit confused about what to do with the Navigation Data. Can I use the "FSX path" for Navigation data (data provider) as I have FSX installed on the same PC? Peter -
Hi, can I run EFB on FSX and P3D as well? FSX and P3Dv4 are installed on the same PC but different drives. EFB installation is networked. Thanks Peter
-
Thanks.
-
Hi, just updated to 1.6.8, do I also have to update the display unit (networked)? Thanks Peter
-
Some groundcharts are wrong
Petermuc3 replied to idefixgallier's topic in EFB v1 (Read only, no longer supported)
You just need to activate a flight in EFB. Let's say LIPZ-EDDM, then activate, go to LIPZ ground, Airportinformation and double click in the empty field above General Info/Communications. you will see the file path for the LIPZ bgl. Peter -
No Departure/Arrival available
Petermuc3 replied to Petermuc3's topic in EFB v1 (Read only, no longer supported)
Sorry, forgot to clean my rwy txt file. Everything is fine now. Peter -
I wanted to fly from LIPX to LOWS. In LIPX I cannot chose a SID (greyed out) and in LOWS I can choose Arrival, but not Approach (greyed out). LIPX is scenery from NSS-Verona Villafranca, LOWS is from Digital Design. No failure message shown by the data provider, scenery update done. Thanks for the help Peter
-
At LFSB only Rwy 26 is selectable
Petermuc3 replied to Norljus's topic in EFB v1 (Read only, no longer supported)
Urs, I checked and now I have procedures for most of the runways using Navdatapro. Thanks Peter -
At LFSB only Rwy 26 is selectable
Petermuc3 replied to Norljus's topic in EFB v1 (Read only, no longer supported)
I did that, but still only 26 selectable; provider does not show any warning. Thanks Peter -
At LFSB only Rwy 26 is selectable
Petermuc3 replied to Norljus's topic in EFB v1 (Read only, no longer supported)
Same problem, but above solution did not work. I use an addon scenery already providing the correct runways and I do not get any warning on the data provider. Thanks Peter -
Thanks, I tried that, but it did not work. Well I will try again. Peter It did not work. I have a 2PC setup, Opus sits on the FSX PC, so \\Peter-PC\OpusFSX\Themes was not accepted by the display unit. Is anyone here to give me a hint? Thanks Stupid me, it was a sharing problem.
-
Display unit is loosing connection
Petermuc3 replied to Petermuc3's topic in EFB v1 (Read only, no longer supported)
Urs, finally I got it working. Not sure how, restartet FSX and EFB a couple of times and there we go. Thanks for your help. Peter -
Display unit is loosing connection
Petermuc3 replied to Petermuc3's topic in EFB v1 (Read only, no longer supported)
I think I have everything ticked, Traffic, display AI and display online traffic (in case of flying IVAO). Maybe there is a problem with simconnect? Peter -
Somehow my display unit (on 2nd PC) is not accepting the file location of my Opus FSX weather file; in my case \\Peter-PC\OpusFSX\Themes\OpusWeather.txt. Do I do something wrong? Thanks for the help. Peter
-
cant see traffic
Petermuc3 replied to fearfactory's topic in EFB v1 (Read only, no longer supported)
Urs, I did all that, but still cannot see traffic (stock aircraft, stock ai) on the display unit. I have no pilot software running, aircrafts can be seen on the AI aricraft monitor of the data provider. I tried for many days now with reinstall etc. but no success. Thanks Peter -
Display unit is loosing connection
Petermuc3 replied to Petermuc3's topic in EFB v1 (Read only, no longer supported)
Hi Urs, ups, yes I was connected over WLAN, now I have disabled 1 WLAN adapter and connected via LAN cabel. But I still don't see any traffic even so Multiplayer as well as online is ticked in the charts menu, no client pilot software running. Thanks Peter I can see traffic in the AI monitor. -
New installation of FSX is really a pain Anyway I have distributed EFB on 2 Win7 PCs. When I start my flight everything works fine, but during the approach phase the display unit is loosing the connection to the server, especially flying online on IVAO. I have also noticed that it takes a very long time to load the display unit and have it connected to the dataserver; my former installation was much quicker. Thanks for the help. Peter
-
Firewall networked PCs
Petermuc3 replied to Petermuc3's topic in EFB v1 (Read only, no longer supported)
Urs, yes thanks I got it and I finally have it working Peter -
Firewall networked PCs
Petermuc3 replied to Petermuc3's topic in EFB v1 (Read only, no longer supported)
Yes I know, but I had it running with my former installation also Win7/XP. Now I can ping both ways and if I check name on the unit it shows "Ok host found". Now I got it to the point that it works at least sometimes. -
Hi, I installed on a new PC, Dataprovider on FSX machine (Win7) and Display unit on 2nd PC (XP). Display Unit can only connect to the provider when the firewall is turned off on Win7 PC. In my firewall setting I allowed Dataprovider to communicate Home/Work as well as Public. Any help is much appreciated. Thanks Peter It seems that I have even bigger problems; display unit hangs with connecting data provider, host name found, so the connection works.
-
I do have the same problem. I downloaded the IVAO .dat files. Should they go into ....\AivlaSoft\EFB\UserData\Online\\IVAO? Thanks Peter
-
Thanks everybody for the explanations. I will try the "VSD option". And then v2 might fix these problems Peter
-
Hi, I know this or similar were already discussed several times, but my experiences changed over time. In the past most of the time I had no issue with displaying online-traffic. But over time it got bad. When I start at an airport, log into IVAO I can see traffic around me, but already after t/o the traffic disappears and does not come back even when parked at my destination. I look into the AI-Monitor, now traffic displayed, but I know for sure that there was plenty traffic around listening to the communications. I installed FS2Crew for the NGX; maybe this also stresses Simconnect? Anything I can do to improve that? Thanks Peter
-
Not assigned runways
Petermuc3 replied to Petermuc3's topic in EFB v1 (Read only, no longer supported)
Works like a charm; thanks very much. Peter