Petermuc3
-
Posts
92 -
Joined
-
Last visited
Posts posted by Petermuc3
-
-
Thanks Oskar,
yes sim was running, I have a LAN connection and a wireless connection between the 2 PCs. It seams the
client is always picking the wireless one; did also a refresh of the weather. So I am a bit lost.
Peter
I tried to connect Server and Client via the LAN connection, but that does not work anymore,
it requires a connection with internet access. EFB 1 worked fine that way.
-
Metar is not drawing the correct report.
E.g. LSZR A/S Metar shows 1021, 231@4kts, EFB client 1023, vrb@3kts.
The client is networked, settings/global is set to ActivSky.
Peter
-
Hi Neal,
the filter criteria define e.g. minimum runway length for your currently selected
aircraft. Let's assume you are flying an A320 and the runway length of your destination
airport is 1000m, then you get the above message. This is just an example, KSAN has long
enough runways. To check which filters are set for your aircraft just go on the client in "Profiles Editor".
If you fly an airliner just try KLAS LVELL KSAN, that might work. Departure procedure could be BOACH8,
arrival procedure LUCKI1.
Peter
-
In my case this might be due to my trial version, so that the server and the client need a internet connection
to start up.
Peter
-
Jonas, yes I use the trial, thought that the timestamp check only affects the server.
Peter
-
Bingo, thank you very much, Oskar, for digging into that. When I installed
the new A320/319 versions into a new place I forgot the
leftover folders completely. I took the FSLabs folder, loaded the A319 and all was well. Sorry guys for causing so much trouble.
Peter
-
Hi,
I run EFB1 with a networked client via a LAN-cable with no internet
access during the connection process. This does not seem to work
with EFB2. I can only connect the client in my WiFi network with
internet access. Is there a way to make it work like with EFB1?
Peter
-
There is no add-on.xml in that FSLabs folder, because I have installed the A320/319
on a different partition.
Peter
-
Hi Urs,
this folder is 2.8Gb. I am not experienced with zipping, how small would I get that.
My e-mail provider does not allow me to send big chunks of data.
Peter
-
Of course, thought my solution is ok? First one is LSGG, then follows Lorby-SI AddonOrganizer_P3D_V4 with no xml,
then LOWG.
Thanks for looking further on this.
Peter
-
Ok, I will look for a solution. For further updates I probably always have to remove these "panel.." files.
Peter
-
Urs and Jonas,
thank you very much for your help. I finally was able to create the database. I took all "panel..." files out of
the FSLabs folder and here we go.
I installed on a networked environment and now have the problem that the client does not connect.
When I installed the client on the networked PC I was only asked for the PC name which hosts the server.
Is this correct?
Thanks again
Peter
-
This folder is available and there is no "add-on.xml" in that folder nor
in the subfolders.
Peter
-
Thanks Jonas,
server-support file attached. Of course it is not a scenery file, Panel.AUA... is created when
I load the FSLabs Airbus with the AUA livery. Why is the DB server even looking at this file?
Peter
-
Jonas, I do not think I can delete a database because I was never able
to create one; just tried to create one from scratch, same problems.
I looked through all the subfolders, nothing which I would see as faulty.
I am close to give up, unfortunatelly, having been a long time user.
Peter
-
Jonas, I checked that (pictures of the folders attached). I tried also to build the database after temporarily removing
add-on.xml.orig and add-on.xml.PSSCBAK to no avail, logfile attached with a new error now.
Peter
-
Thanks Urs,
this addon is in use, in that case loading the AUA livery with the FSLabs A320 creates this Panel.
But I do not understand what this has to do with the scenery.cfg, scenery-add-ons.xml. There is nothing there
refering to FSLabs. I remember someone had the same problem with EFB1, but I did not find a solution.
I do not know what to do now.
Peter
-
Just downloaded and installed EFB2 server and get "could not read database due to errors".
My P3D4.3 is running fine, no issues with sceneries and the EFB database server is pointed to
the correct location. Thanks for the help, logfile attached.
Peter
-
Thanks Urs,
everything is fine. UTL is running and AI shows up in EFB.
Peter
-
Hi,
just wanted to start a flight trying Ultimate Traffic live first. But now UTL is not injecting traffic anymore. It was running fine for weeks with my
"old" EFB installation. The only thing changed on my setup was installing EFB 1.6.14 and 1.6.15. I did everything what was recommended on FlightOne's forum
to no success.
Strange thing, Envtex showed up in my P3DV4AddonOrganizer. After deleting it, UTL runs fine.
Peter
-
Thanks Urs,
AV was turned off. I will try a flight later with IVAO and check.
Peter
-
Hi Urs,
thanks for the quick answer. Unfortunately the files are not there. The problem might be that Media Player Classic automatically takes
ownership of .dat files. I think it should use Windows Shell. I am certainly not an expert in Windows. How can I change that?
Peter
After deleting Win Media Player Classic 2 files are now there (def.ivao, fir.ivao). I thought there was one more .dat file?
Ok, found the airports.dat on my old PC.
-
I did a complete reinstall, everything fine so far. I could not find the IVAO files and honestly
cannot remember how I made IVAO traffic to show up.
Thanks Peter
-
Thank you Urs,
will do. I might uninstall the old version first to be sure.
Peter
Metar from Active Sky
in EFB v2 - Support forum
Posted
Thanks Jonas,
I do have the paid version. If a disable my wireless adapter on the client, thus having no internet access, and have
the LAN connection to the server PC only, the client does not connect to the server. No problems when I have my
wireless adapter enabled. Yes I set my AS folder correctly I think C:\Users\Peter\AppData\Roaming\AS_P3Dv4\Weather\current_wx_snapshot.
Peter
Weather is working now, don't know what was wrong. But still no connection with LAN only.