Aerosoft Airbus X Extended 1.15 FPH malfunction

[AlfredoDiaz]

Hi, excuse my english.

I installed the AXE 1.15 FPH and everything is OK, the option to save in AXE format appears and save the flp, in the file the waypoints appears, but, when you try to import it in AXE FMC appears a "NOT IN DATABASE" error and the Flightplan in FMC only has the departure and arrival airports.

 

this is the EFB FPL

 

[AivlaSoft EFB Route - www.aivlasoft.com]
//Saved 11/11/2013 22:03:02z, EFB Version=1.3.10.25024
//AIRAC cycle 1311, Valid 17/OCT/2013 - 13/NOV/2013
Format=1
ATS=ESILA N865 VIBAS UN865 MORAL
Generator=ATS Description
Origin=LEAM
Destination=LEMD
CruiseAltitude=28000
DepartureProcedureInfo=25|ESIL1E||26
ArrivalProcedureInfo=32L|MORA4C|
ApproachProcedureInfo=32L|ILS Rwy 32LZ|TOBEK
Wpt=Enroute|0|ESILA||Fix|0||37.051417|-2.774139|0|ESIL1E
Wpt=Enroute|1|UNTOS||Fix|0||37.250556|-3.277695|0|N865
Wpt=Enroute|2|VIBAS||Fix|0||37.392222|-3.630861|0|N865
Wpt=Enroute|3|TINEK||Fix|0||37.651972|-3.628861|0|UN865
Wpt=Enroute|4|BLN|BAILEN|VORDME|116,200000|LE|38.152528|-3.625000|0|UN865
Wpt=Enroute|5|MORAL||Fix|0||39.000000|-3.542167|0|UN865
[END]

 

and this is the AXE FPL:

 

[CoRte]
ArptDep=LEAM
ArptArr=LEMD
RwyDep=LEAM25
RwyArr=LEMD32L
RwyArrFINAL=
SID=
STAR=
APPR_Trans=
Airway1=N865
Airway1FROM=ESILA
Airway1TO=VIBAS
Airway2=UN865
Airway2FROM=VIBAS
Airway2TO=MORAL

[GG_Flyer]

Hi Alfredo,

 

(Your English is fine, sir!)

 

I will study this later in my day.

 

Three questions for now:

 

1) Have you updated the NavData Pro for the Airbus X Extended to the same AIRAC as EFB? (Cycle 1311)

2) What happens if you manually enter the same route into the Airbus' FMGS unit?

3) Can you load other routes, or do all routes that you attempt to load in the Airbus give the NOT IN DATABASE error?

[AlfredoDiaz]

Hi, today i made a couple of tests. I believe that the problem are the "realistics routes"...I will explain...In the Airbus Configurator I have an option to "Realistic Company Route" (use routes without SID/STAR), if I check it, and use an EFB route saved with procedures..¡bum!..error. If I use an EFB route saved without procedures, works well.....

So, the ACE FPH works well, the problem is the misconfig I made...

 

Excuse me and thanks for your great support.....