Matthias

Hi Urs, here they are: one is from the F1ATR that works fine, the second one is from EFB that has a number of strange wp (headings!) and needs of course revised once it is loaded- but it doesn't load. I checked a number of different fp during the last days- none of them were transferred into F1ATR though they are loaded into FSNavigator. Further I don't understand why EFB doesn't provide e.g. WI810 though the AIRAC cycle is the same... Regarding the program: I use 1.5.1.15702 and it worked ok until I installed it on my new Win7 Prof system (before it was win7 home) Txs for your assistance Matthias [Route] DepICAO=EDDM ArrICAO=LOWI CoRoute=MUNINS08-2 [Waypoint.00] Waypoint=KPT|47745775|10349833|4|2|DIRECT|0|0|0|0|0|0|0|0|15 [Waypoint.01] Waypoint=ELMEM|47285633|10570739|5|0|DIRECT|0|0|0|0|0|0|0|0|15 [Waypoint.02] Waypoint=WI810|47289920|10676758|5|0|DIRECT|0|0|0|0|0|0|0|0|15 [Waypoint.03] Waypoint=WI813|47301150|10963747|5|0|DIRECT|0|0|0|0|0|0|0|0|15 [Waypoint.04] Waypoint=WI006|47305667|11086056|5|0|DIRECT|0|0|0|0|0|0|0|0|15 [Waypoint.05] Waypoint=WI005|47252422|11268561|5|0|DIRECT|0|0|0|0|0|0|0|0|15 [AivlaSoft EFB Route - www.aivlasoft.com] //Saved 26.07.2016 19:52:46z, EFB Version=1.5.1.15702 //AIRAC cycle 1501, Valid 08/JAN/2015 - 04/FEB/2015 Format=1 ATS=KPT ELMEM Generator=ATS Description Origin=EDDM Destination=LOWI CruiseAltitude=12000 DepartureProcedureInfo=||| ArrivalProcedureInfo=|| ApproachProcedureInfo=08|RNAV Rwy 08| Wpt=Enroute|0|KPT|KEMPTEN|VORDME|109,600000||47.745789|10.349828|0|DCT Wpt=Enroute|1|ELMEM||Fix|0||47.285633|10.570739|0|DCT Wpt=Approach|0|WI801||Fix|0||47.292425|10.738761|0|RNAV Rwy 08 Wpt=Approach|1|WI802||Fix|0||47.296364|10.839597|0|RNAV Rwy 08 Wpt=Approach|2|WI803||Fix|0||47.300164|10.938356|0|RNAV Rwy 08 Wpt=Approach|3|WI804||Fix|0||47.303864|11.037131|0|RNAV Rwy 08 Wpt=Approach|4|*RW08||Fix|0||47.258803|11.330935|0|RNAV Rwy 08 [END]

Hi, for reasons I don't know after endless tests the EFB-plan doesn't load into F1ATR any more though it is loaded as FSX plan and also shows up in FSNavigator. I receive the two messages "no active flightplan" and "import error". Manually created fp's work fine and can be saved with FMS. Only that import feature from EFB to F1ATR is not functioning any more. Can anybody give me a hint? Best Matthias

Hallo, creating a FP from LSZH southward I've found in the following SID's one icp in a distance of 10804 nm: GER1S, GER1SV, ALBI1R. It is obviously an incorrect "Southern" instead of a correct "Northern" WP. Could you pls explain or advice how to fix it? Best Matthias

Hi everybody, I am still in the efb test status and what is confusing me is how to handle route setup and transitions. according to the flight crew operation manual for a318-321 series a arrival consists of transition, star, via and approach (exactly in that sequence- they have an exhibit included in the manual- chapter 1.22.20; p18). Imho this sequence is not fully reflected in efb, e.g. transitions are provided both in arrival AND approach tabs. This leads to very funny charts which need then to be "cleaned" by trying to delete waypoints that are double or outside a "logical " arrival route. Unfortunately the efb manual doesn't refer at all to the transition issue, so the user is left alone with that problem or is forced to use pre-defined routes from certain websites. This works fine, but it degrades efb to a simple moving map tool. Would be pitty. Moreover I miss a display of airroutes in maps. that would make a very different route setup possible- by choosing my own airroutes (by number, not by waypoint sequence). Possibly I have a different understanding of what it is about in flightsimming and in using efb in particular (e.g. i don't use online flying yet, so i am my own atc), but I hope for good advice or explanation anyway. Kind regards Matthias

Hi there, I am about testing EFB with A320EX, in particular the fpl handling. Seems it doesn't work for me yet though I have installed the handler-dll. I've created a fpl from MUC to FRA with EFB, saved it "with procedures" in A320EX-mode, loaded it into MCDU of A320EX. SID is then the same (correct), but STAR is missing completely. What's wrong? Best Matthias