romoni

Hello again! It seems to be that Windows Update is the reason that mess the ServerSettings. Today I updated Windows 10 and after that the same problem occured and got it solved the trick above. Rolf

Thank You Urs! I tryed a many variations to solve this problem but no lucky. Could You, please, to tell me that about where I put this path line -> C:\Users\Rolf\Documents\Flight Simulator X - Steam Edition Files I have Client Program on the Laptop and Server on the Desktop PC. This problem not effected to saving flight plan to Company Route folder and I can use EFB,s without any other problems. The problems occured only as I make a new flight plan or open Company Route plan. Client give me an information on the STATUS that check the SERVER with red letters. Rolf Hi again Urs! Thank You very much for Yours help. Everything is ok now. ServerSettings -> FlaightPlanFolder -> replace the path was the solution. Rolf

Thank You Urs! I tryed a many variations to solve this problem but no lucky. Could You, please, to tell me that about where I put this path line -> C:\Users\Rolf\Documents\Flight Simulator X - Steam Edition Files I have Client Program on the Laptop and Server on the Desktop PC. This problem not effected to saving flight plan to Company Route folder and I can use EFB,s without any other problems. The problems occured only as I make a new flight plan or open Company Route plan. Client give me an information on the STATUS that check the SERVER with red letters. Rolf

Hi Urs and thank You! I have client program on the laptop and server on the desktop pc. Desktop pc is called MASTER. I didn't chage anything before or after .117 update but after the update this problem start. I will try to check those path later as I have time to do it and report back. Rolf Ok - I checked my client path via Settings page and they should be okei but still I get the same message as I save a flight plan. I don't understand now the problem - sorry.

Hi Urs and thank You! I have client program on the laptop and server on the desktop pc. Desktop pc is called MASTER. I didn't chage anything before or after .117 update but after the update this problem start. I will try to check those path later as I have time to do it and report back. Rolf

Hello! After a latest update (yesterday) a client started gave to me a message that check server log as I got a flight plan made. Hard to explain but here is a support file. Rolf Server_202004301132.txt.zip

Hello! I made a fresh installation both Server and Client (un-installed both first) but same problem occured so I desided to change my start order - > 1. Active Sky next 2. FSX SE 3. EFB2 Server 4. EFB2 Client and this solved the problem. I have no idea about what cause this but before I haven't any problem although I started FSX SE last. Never mind - main thing is that EFB2 works. It's very, very good addon! Rolf

Ok - thanks! i'll check updates but I updated the latest version to #112 both client and server. Mayby I should be re- install the server. AVG (a virus program) is sometimes too exact... I am going to Faro now but check this after I landing and report back tomorrow. Rolf

Problem solved I think. I updated the EFB2 yestarday to version 2.1 (build #112) and tested it today and everything seems to be Ok now. Thank You for this update. Rolf I spoke too early. The same problem continue. Here is those files You asked Client_201909161419.txt.zip Server_201909161421.txt.zip

Problem solved I think. I updated the EFB2 yestarday to version 2.1 (build #112) and tested it today and everything seems to be Ok now. Thank You for this update. Rolf

Hi! The problems continue. I haven't any problems after I re-start EFB2 Server but I need to it every time I start my flight session. I try to add couple log file and picture to show about what I mean: First picture as I run EFB first time and second after re-start EFB. Aircraft is PARK 11. serverLogfile.txt serverLogfile.txt

Hello! As I start first Active Sky Next and then EFB2 Server (Desktop PC) -> EFB2 Client (Laptop PC). After that I start FSX SE. After that I check the EFB2 Client screen and I find that I can't see my aircraft on to position I selected as I started the simulator. I must re-start the EFB2 Server and after that everything is OK. Very odd and I would like to know about what caused this? Today I updated the latest version of the EFB2 but this happened an the earlier version, too. Windows 10 1903 FSX SE Rolf

Hi Oskar! Thank You! I got a right EFB2.0 path to the Navigraph FMS Data Manager and tested that it works as it should be. It seems to be working and everything is ok again.

Hi Oskar and thank You for help/reply! What i did was that first I manual downloaded a correct EFB2 AIRAC from Navigraph site and after that I unpacked .zip file with 7zip and ran setup file using admistration rights. Setup file offered a correct path to install the AIRAC. This procedure has been worked every time before without any problem. After updating the EFB2 database using the "Update Navdata" tab - I done it. OK - I will delete those NavData folder & SidStars folder Next time try to use the Navigraph FMS Data Manager with correct path... Rolf

Hello again! Yes - ofcourse every user is self-responsible for correct AIRAC - no problem but the question was that why same AIRAC is different date and why I ask this from You is simple thatif You have some information. Sorry my bad english - a picture mayby tell You about what I mean:

Hello! There is some odd I found yestarday: AIvlaSoft/EFB2/Server/AIRAC/Navigrapf FMS Data: -NavData folder -> date are Aprill 19.2019 - SidStars folder -> date are April 19.2019 FSX (SE)/PMDG: NavData folder: date are July 12.2019 SidStars folder: date are July12. 2019 I have been some troubles with approaches. I got a nice approach route to LEBB with EFB2 but NGX 737-800WL FMC made it totally wrong approach route. I built route up using RouteFinder. What I want to know is are those dates correct or are the EFB AIRAC some reason old? Thank You! Rolf

Ok - thank You! Rolf

Yes - piohib take a screenshot and we seem to be the same problem. Rolf

A new problem: I dowloaded a few "private" AFCAD-BGL's and put them to ...server\AFDAD folder. After that I followed order and open Data Base Builder -> Update Simulator and check that those two paths are correct and simulataor is Dovetail Games FSX SE. The problem is that Start Scanning button is gray - no function so I can't Update Simulator. Rolf

Hi again! It was Panda Dome that blocked documents of the EFB2 client installation. Too tight settings. I think that was reason to slow installation, too. Thank You Rolf

Hi! I changed port of the client software and it's work now. BTW - the installation was very slow. It's took about half hour and never happened before.I can download those manual from Yours Download site and see if the manual problem still continue. I have Panda Dome Anti Virus program that I use. Rolf

Ok - I got EFB2 Client installed using the complete installer but I had still a problem. I couldn't install any pdf manual. I must skip them as installer got to me posibility abort, retry or skip installation. Very odd IMO, isn't it? Rolf

Hi - it was automatic update but I can try to use the complete installer. Rolf

I updated EFB2 Server without problem but as I try to to do same to EFB Client (Laptop PC) I get information like this: Error opening file for writing: C:\User\Name\Documents\AivlaSoft\EFB2\Client\Licence\Software LicecenseAgreement.pdf Click Abort to stop installation retry to try again or Ignore to skip this file. Only Ignore works and Installation stop. Windows 10 Home 64 bit FSX Steam Regards Rolf

EFB v2 isn't flight plan program but v1 was? Well - I tryed make a flight plan with EFB v2 and send it to a PMDG NGX folder. It gone but .pln format. Ok - then I tryed use the PFPX planner and send flight plan to NGX folder but some reasons without succesess. After that I'm start to getting to be a little bit angry. Then I remember that I have a good and free nice flight plan program called LittleNavmap. I copied a flight plan from Route Finder (same as I made with EFB2) and copy/paste it to LNM and after that I exported the plan to NGX Flight plan folder without pain. This is my way to use this new program. Other could be use those both EFB1 and EFB2 side by side.