banshee

Hi, Awhile back I posted here on the forum because I had the same problem with LIML. CG flyer answered me.The thread is still here I think.Well, what i did now was this. I removed the lines from LIML,saved the file and reset the cache.The problem I had in LIML then came back!I put the lines back and the problem was gone and the runways and approaches are available.This tells me that the runways.txt is being read by the software. EFBs runways.txt is in the right place I think. c:\users\vicky\documents\aiivlasoft\efb\userdata I have other 2 runways.txt files but they belong to peter dawson's makerunways that is used for radar contact.They are located in program files/locate and in the FSX directory. I will send you the logfiles and runways.txt Thank you in advance Urs and CGflyer Vic

One more: Vittoria

Sure. Vittoria Here's the picture:

Hi, I do use panc default and usually with updated airacs. I run database updates every time I install addons airports.

Maybe it should be rjbb 06 06r and 24 24L ? Not sure.I tried that too and everything is still greyed out

Hi, I was running airac 1009. I updated it to 1011 and I still have that problem. I will paste my runways.txt here : --------------- // Aivlasoft EFB, Runway assignment table: FSX runway to Navdata runway // Copyright by AivlaSoft - www.aivlasoft.com // // *** %%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%% // *** it is important to always define ALL runways from an airport, // *** whether they have changed or not! // *** %%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%% // // General) // Column 1: ICAO 4-letter code of the affected airport // // A) if the designator of an existing runway in FSX has been replaced/changed: // Column 2: Designator of the FSX-Rwy // Column 3: Designator of the corresponding Navdata-Runway // // if a runway in FSX does no longer exist in reality (and therefore is no longer listed in Navdata) // Column 2: Designator of the FSX-Rwy // Column 3: 'nil' (without quotation marks) // // C) if a runway in reality (and in Navdata) is existing, but is not available in FSX // *** this case is not possible to assign *** // // ICAO FSX Navdata CYHZ 06 05 CYHZ 24 23 CYHZ 15 14 CYHZ 33 32 PAOM 09 10 PAOM 27 28 PAOM 02 03 PAOM 20 21 EDDP 08 08L EDDP 26 26R EDDP 10 nil EDDP 28 nil LFSB 08 08 LFSB 26 26 LFSB 16 15 LFSB 34 33 LFSB 16R 15R LFSB 34R 33R EGCC 06R 05R EGCC 06L 05L EGCC 24R 23R EGCC 24L 23L PANC 06R 07R PANC 24L 25L PANC 06L 07L PANC 24R 25R PANC 14 14 PANC 32 32 PAFA 01 02 PAFA 19 20 PAFA 01L 02L PAFA 19R 20R PAFA 01R 02R PAFA 19L 20L PAFA 01Water 02C PAFA 19Water 20C EDXW 15 14 EDXW 33 32 EDXW 06 06 EDXW 24 24 LFQB 05 05 LFQB 23 23 LFQB 18 17 LFQB 36 35 LFQB 18R 17R LFQB 36L 35L EDDB 07R 07 EDDB 25L 25 EDDB 07L nil EDDB 25R nil EDDK 14L 14L EDDK 32R 32R EDDK 07 06 EDDK 25 24 EDDK 14R 14R EDDK 32L 32L RJBB 06 06L RJBB 24 24R LIML 18L 18 LIML 18R 17 LIML 36L 35 LIML 36R 36

Hi, I installed vrs 1.20.I created a flight panc-rjbb and the data provider threw up some errors because rjbb in fsx has only 2 runways whereas in reality kansai has 4.I opened runways.txt and added these lines : RJBB 06 06R RJBB 24 24L I saved the file. I then went to settings-miscellaneous and clicked reset data cache and restarted the software. I created the flightplan again and I did not get an error like before but approaches and arrivals were still greyed out. I don't understand what I did wrong. Could you please help me out ? Thanks !

Thank you very much Urs and Travis !! @Urs, yes I completely missed that part on top of the runways.txt ! Vic P.s sorry for the duplicate post !

Duplicate.Deleted.

Hi, Thanks for answering. I will try and do what you suggested. In the meantime. What I don't understand is how do you pick/pair those numbers like: ---- LIML 18L 18 LIML 18R 17 LIML 36L 35 LIML 36R 36 ------------ why the 18 right after the 18L. It could be that the runway is now 17 and not 18... I guess my problem is there i can't figure out what numbers go where and beside what. I prob didn't make myself clear. If i didn't i will try to rephrase Thanks

Hi, I today i encoutnerd a problem that I cannot duplicate. basically I tried building a flight plan lfpg-liml and I got this error which is explained in the aivlasoft manual: *quote from the log* 2010-09-07 16:30:11,359 [1] INFO AivlaSoft.Efb.DataProvider [(null)] - TcpConnector started. 2010-09-07 16:30:11,369 [1] INFO AivlaSoft.Efb.DataProvider [(null)] - Provider is ready and running ... 2010-09-07 16:30:49,889 [13] INFO AivlaSoft.Efb.DataProvider [(null)] - New connection from 192.168.0.2 accepted. 2010-09-07 16:30:52,369 [1] INFO AivlaSoft.Efb.DataProvider [(null)] - Request for Airport [LFPG] from '192.168.0.2' received. 2010-09-07 16:30:53,849 [1] INFO AivlaSoft.Efb.DataProvider [(null)] - Request for Airport [LIML] from '192.168.0.2' received. 2010-09-07 16:30:53,889 [1] WARN AivlaSoft.Efb.DataProvider [(null)] - Navdata runway ident 17 at airport LIML could not be assigned to FSX runway. 2010-09-07 16:30:53,889 [1] WARN AivlaSoft.Efb.DataProvider [(null)] - Navdata runway ident 18 at airport LIML could not be assigned to FSX runway. 2010-09-07 16:30:53,889 [1] WARN AivlaSoft.Efb.DataProvider [(null)] - Navdata runway ident 35 at airport LIML could not be assigned to FSX runway. 2010-09-07 16:30:53,889 [1] WARN AivlaSoft.Efb.DataProvider [(null)] - Navdata runway ident 36 at airport LIML could not be assigned to FSX runway. 2010-09-07 16:30:53,889 [1] INFO AivlaSoft.Efb.DataProvider [(null)] - Available FSX runways at this airport are as follows: 18L, 36R, 18R, 36L *end of quote* I read the instructions on how to correct it but I didn't undertsand how to do it right. I tried now,again, to build the same flight plan and I do not get the error anymore but all the runways at Linate are grayed out.Same goes for the arrival plates. Can you please help ? Thanksss Vic

it still isn't showing "transition altitude" and "GS on the charts yet ?

Hi, yesterday I installed fspassengers and now EFB keeps crashing after I start the fspassengers software. It usually happens a few mins after starting fspax. I usually run fsx,active sky evolution, efb (networked) and ezca. Both ezca and efb crash when fspax is running and eventually fsx if I let it run. Could you please help ? I will try contacting the fspassengers vendor as well Thanks Vic Specs: i7 980x-gtx480-psu950 corsair and win7 x64 This is the error I get. Sorry it's in Italian: --------- Descrizione: Stopped working Firma problema: Nome evento problema: CLR20r3 Firma problema 01: aivlasoft.efb.dataprovider.exe Firma problema 02: 1.1.0.23865 Firma problema 03: 4be96534 Firma problema 04: AivlaSoft.Efb.DataProvider Firma problema 05: 1.1.0.23865 Firma problema 06: 4be96534 Firma problema 07: ac Firma problema 08: f2 Firma problema 09: System.ArgumentException Versione SO: 6.1.7600.2.0.0.768.3 ID impostazioni locali: 2057 -----