ontheair
-
Posts
190 -
Joined
-
Last visited
Posts posted by ontheair
-
-
Hi,
Back again in the Sim World. Just hope you're doing fine ! Congratulations for the "new" EFB v2 I've just discovered
Which AIRAC cycle is provided with EFB v2 I'm planning to buy ?
I did not find that kind of info in the installation manual
The AIRAC Cycle supplied with the basic installation is not the most recent one, however it is included to provide full functionality of EFB
J.Louis
EFB v1 customer since a long time
P3D v1, v2, v3
-
Hi,
Back again in the Sim World. Just hope you're doing fine ! Congratulations for the "new" release 1.6.14
Just installed latest EFB versions 1.6.14.13979/DU 1.6.14.13978/DP
Both P3D platforms installed P3D v2 + P3D v3.4
When paths (DP settings) pointing to P3D v2 everything working OK aircraft is showing on the moving map
When paths pointing to P3D v3.4 aircraft is not showing ? Simconnect status switching from active to inactive with P3D v3.4 in pause mode
What do I miss ? I've just forgotten
Best regards
Please just ignore the above question : unchecking the "Pause on task switch" box (Options/Settigs/General) makes the aircraft showing in P3D v3.4
-
Happy New Year to all of you
Salut Urs,
This morning a warning message never seen before AFIAK : "Could not draw the profile view for procedure LOWK ILS Runway 28R (KI) because of : Elements count <2"
AIRAC 1413
Best regards
-
Salut Urs,
LFSB rwy 33 is available (not greyed out) but the LFSB apch proc selection to rwy 33 is just showing that there is no apch available ?
from SID&STARS/LFSB.txt file :
APPROACHES
APPROACH ILSX33 FIX CI33X 5700 FIX FI33X 5700 RNW 33 FIX OVERFLY BLM AT OR ABOVE 1290 TRK 243 INTERCEPT RADIAL 273 TO FIX ALTIK SPEED 220 FIX ALTIK 5500 FAF FI33X MAP RNW 33
TRANSITION ALTIK FIX ALTIK TURN RIGHT DIRECT FIX OVERFLY D262T TURN RIGHT DIRECT FIX OVERFLY D273Q FIX OVERFLY D229Q FIX D194P FIX D298P 7000 TRK 118 UNTIL 0.7 FROM FIX D298P
airport info : P3Dv2\Scenery\0601\scenery\APX50150.bgl
AIRAC 1004
default scenery
What could be wrong ?
Thanks
-
Bonjour Urs,
I can confirm that runways.txt file is located on the DP's PC, but on a different drive :
DP : E:\Program Files (x86)\AivlaSoft\EFB
runways.txt : C:\Users\Jean-Louis\Documents\AivlaSoft\EFB\UserData
an the LGKO entry :
LGKO 15 14
LGKO 33 32
is unique in the runways.txt file
My last attempt was to delete the 2 lines above and to make a new LGKO entry. Bingo ! the DU is now showing runway 32 instead of 33. There was for sure something wrong in the former LGKO 33 32 entry, maybe an extra-space, I did not suspect the first time.
Thanks for your kind assistance
-
Salut et merci Urs,
- did you install a third party scenery for LGKO or did you add a replacement AFCAD file? NO
- did you run the scenery update YES
- which file name is indicated at the airports information dialog : E:\Program Files (x86)\Microsoft Games\Microsoft Simulator X\Scenery\0602\scenery\APX55180.bgl
FSX is the currently selected sim (DU settings)
AIRAC 1403
Thanks again
-
Salut Urs,
from my runway.txt file located C:\Users\Jean-Louis\Documents\AivlaSoft\EFB\UserData :
LGKO 15 14
LGKO 33 32
from LGKO.txt located E:\Program Files (x86)\Microsoft Games\Microsoft Simulator X\Aivlasoft\SIDSTARS
RNWS
RNW 14
RNW 32
ENDRNWS
but the DU is showing that LGKO runways are 14/33
33 is greyed out when selecting SID or STAR or APCH
what could be wrong ?
Best regards
DU 19605 DP 19608
-
Yes, I confirm I'm mainly using Active Sky 2012 (REX Overdrive is installed but I use it for textures only)
Could that be related with repeated DU disconnections on the remote laptop ? What do you think about dear Urs ?
Happy new year 2014 to all of you
-
Salut Urs,
I'm currently experiencing incessant disconnections on my remote laptop. The DP settings have not been changed (Timeout values are all set to 10). The messages I can read on the DP window are :
- warning : connection to 192.168.1.11 terminated caused by Timeout SND
- warning : connection to 192.168.1.11 terminated caused by Timeout SND (repeated)
- info : new connection from 192.168.1.11 accepted : this last message is repeated many times, approx every minute.
see https://www.dropbox.com/s/rlj1t4hm38s0btv/DP.pdf
What should I do ? what should I change ? to avoid those multiple disconnections. Thanks and happy new year to you all.
latest version 1.5 installed and running on both PCs
-
Salut Urs,
[...] Interface to the simulators will be FSUIPC (no longer SimConnect) Fine ! but what kind of FSUIPC ? registered version or not ?
What about WIDEFS, required or not ?
Just hope your batteries are now at high-level...
Bon courage pour la suite.
Cordialement
-
Bonjour Urs,
From the changelog :
Version 1.3.10
FIXED: (Online/IVAO, VATSIM) Not all active ATC services are depicted on chart
Fine !
Just a question :
"WebEye" that is now replacing "The Eye", is the tool which allows you to view who is online on the IVAO network. It is a web-based tool based on HTML5 and Javascript.
What should I use as the correct path to point to the Ivao data folder (DU/Online tab) to replace C:\Program Files (x86)\IVAO\The Eye\data
Merci
Jean-Louis
-
Salut et merci Marc for the info and the link provided !
On the MMG site I can read :
"In January 2013, Johannesburg has changed its ICAO code from FAJS to FAOR.
We have made a patch that will patch the ICAO code of our Johannesburg International Airport package from FAJS to FAOR. We have made patches available for the older FSX Johannesburg International Airport and for the new NMG Johannesburg International Airport 2012 package. Please make sure you get the right version for your package as the patch is version specific"
I understand there are 2 patches available. As I don't plan to buy the Johannesbourg scenery airport you're talking about which one should I choose :
- FSX Johannesburg International Airport FAJS to FAOR Patch ?
- FSX Johannesburg International Airport Patch V3.2 ,
As they say on the MMG site/download section, both are for the Flight Simulator X version of Johannesburg International ONLY. That is not clear enough !
Cordialement
-
Salut Urs,
If you can't, I will answer this question by myself, no need to ask Navigraph : after checking the Aivlasoft/SIDSTARS folder content I can say a new Airac cycle like the lastest one published (AIRAC 1303), mean each airport .txt is updated with the mention :
//AIRAC Cycle : 1303 (07/MAR/2013 - 03/APR/2013) - Ver.1
whatever there was change(s) or not !
This is perfectly normal ! and moreover it's a quick way to check the current airport.tx is up-to-date i.e matches the latest AIRAC cycle
Best regards
-
My last question should have been :
does a new Airac cycle like the last one published, mean each airport is updated with the mention :
//AIRAC Cycle : 1303 (07/MAR/2013 - 03/APR/2013) - Ver.1
in the header, even when there is no change at all ?
-
It's now clear we have not the same Airac data set !!
I'll try to fix that big issue asap
Regards
-
"I suggest to remove the currently installed cycle from your harddisk, then download the latest AivlaSoft EFB data format from the Navigraph website and try again. I cannot imagine that Navigraph lists..."
Each of my Airac cycle is updated the same way from the very beginning....
Anyway it's now clear we have not the same Airac data set.
I'll try what you suggest and let you know
"If you have a look at the header of the file that you have posted and then compare it to any today's header you will see that there is a difference"
Question : does a new Airac cycle mean each airport is updated with a new header, even when there is no change at all ?
Regards
-
not clear enough !
"Your FSX airport is still using the ICAO code FAJS. Therefore EFB cannot find a match between the ICAO code used in navigation data and the ICAO code used in FSX"
EFB doesn't know FAOR but FAJS.
I had a look at the current cycles from Navigraph 13/03 and it's like I already said: Navigraph is providing navigation data for FAJS.
//FAJS (O.R. TAMBO INTL)
//Worldwide Navaid Database for AivlaSoft
//Exported via DFD v1.0 13.0101
//Software copyright © 2013 Richard Stefan, NAVData-Service
//Support available via forum at http://forum.navigraph.com
//
//Data provided by Navigraph - www.navigraph.com
//Data copyright © Navtech Inc
//This data may not be used, recompiled, interpreted or
//distributed for any purpose without the written consent
//of Navigraph.
//
//The contents of this database is dated and must not be
//used for real world navigation as it is unlawful and
//unsafe to do so.
//
//------------------------------------------------------
//AIRAC Cycle : 1213 (13/DEC/2012 - 09/JAN/2013) - Ver.1
//------------------------------------------------------
The PMDG data for FAJS is the same
Don't we have the same data coming from the same provider Navigraph ?
This is very confusing !!
Regards
-
I'm not kidding Urs,
"FADN -AIRAC Cycle : 0808 (31/JUL/2008 - 27/AUG/2008)" is part of my current AIRAC 1303. That's the way it is !!
I had a look at the current cycles from Navigraph 13/03 and it's like I already said: Navigraph is providing navigation data for FADN.
from : E:\Program Files (x86)\Microsoft Games\Microsoft Simulator X\AivlaSoft\SIDSTARS\FADN.tx
// FADN (DURBAN INTL)
// Data provided by Navigraph - http://www.navigraph.com
// Data copyright © 2007 European Aeronautical Group.
// This data my not be used, recompiled, interpreted or
// distributed for any purpose without the written consent
// of Navigraph.
//
// The contents of this database is dated and must not be
// used for real world navigation as it is unlawful and
// unsafe to do so.
// ------------------------------------------------------
// AIRAC Cycle : 0808 (31/JUL/2008 - 27/AUG/2008) - Rev.1
// ------------------------------------------------------
FIXES
FIX 25DME LATLON S 30 0.63066 E 30 55.00566
FIX APDOG LATLON S 30 5.38218 E 30 0.21234
Don't we have the same data coming from the same place ?
Regards
-
Hi again Urs,
You wrote : "Neither Navigraph nor Aerosoft provides departure procedures for FADN (Durban)"
I just checked and I can say that SID&STAR&APCH are available at FADN - 'AIRAC Cycle : 0808 (31/JUL/2008 - 27/AUG/2008) - Rev.1) but once again they are all greyed out despite correct rwys depiction just like FAJS ????
There might be something wrong
-
Bonjour Urs et merci,
but the link provided does not help ?? The FAJS issue I'm experiencing is different : I should have told you I do not use FAJS/FAOR addon scenery but the default one !
So I still do not understand why SID&STAR&APCH are all greyed out despite coorect runways depiction
Kind regards
Jean-Louis
-
Salut Urs,
At Joannesburgh FAJS (now renamed FAOR) all SID&STAR&APCH are not available (greyed out) despite they all exist (Airac 13/03) and there is no conflict with runways depiction. What could be wrong ?
EDITED by AivlaSoft: REMOVED procedures data due to copyright reasons.
Thanks
Jean-Louis
-
Salut Urs & Cie
I'm currently using the Aivlasoft DP&DU latest version. Thanks again for providing this Aivlasoft version that is REX Essential Plus compatible.
In the METAR window how can I remove REX previous versions (REX2 and REX Essential) that are listed in the drop-down window ?
Sincères salutations
-
You should find the wx Metar XML file as follows (if your drive is D) :
D:\Program Files (x86)\Real Environment Xtreme Essential\MetarXML
have a try and let us know !
regards
-
"It is that folder" )
good to know ! just tried and the Rex wx seems to be OK
don't forget to share the REX MetarXML folder if your DU is running on a remote PC...
Thanks
AIRAC cycle
in EFB v2 - Support forum
Posted
Thanks very much.
Airac cycle 1802. I should know about that but does 18 mean 2018 ? and 02 February ?
If yes, it's outdated
Except subscribing to Navigraph or similar provider, is there a way to get a more recent cycle ?