tkemp66
-
Posts
17 -
Joined
-
Last visited
Posts posted by tkemp66
-
-
Seems like every route I create with Simbrief comes up as invalid in EFB Client. This has only happened since updating to Navigraph latest Airac 2307. I have never seen this problem before. Can you help me understand whars going on please? This is basically for every route that's been created since yesterday. Example : Could not find airway 'Y280' which contains entry point 'REDFN' and exit point 'CHRGE'
This is for the Resulting Route: (FPL-JBU702-IS
-A320/M-SDE3FGHIRWY/LB1
-KSLC1640
-N0463F350 RUGGD3 EKR DCT LAA DCT IRW J20 EIC DCT SWB DCT HRV Q105
REDFN Y280 CHRGE PRICY3
-KMCO0353 KDHN
-PBN/A1B1C1D1O1S1 DOF/230714 REG/N320SB EET/KZDV0022 KZKC0105
KZFW0129 KZHU0214 KZJX0255 KZMA0315 KZJX0328 OPR/JBU PER/C RMK/TCAS) -
7 hours ago, lonewulf47 said:
Well Troy,
This is not really much information that you supply. Sounds to me like: "My car is not running, what shall I do?" ?
It would be very interesting know what kind of installation you have: Server and Client on same machine or networked, Server Build # and then some logfiles would also be interesting. Maybe you consider supplying this kind of information?
Unfortunately this is not the first time this has happened. It just so happens that after this build, I could not get the client to connect. After previous builds and updates, I completed a rebuild of the scenery and re-ran Airac from server. After this, sometimes the client works and sometimes times it doesn't. For instance, before this last build, I had just completed a 5hr flight while using EFB client, and that worked flawlessly. But as soon as I created another flight, EFB client lost connection to EFB server. Restarting both EFB server and client did not resolve this problem. I think I had to restart the computer or rebuild scenery/Airac again for it to work. This was the case even though I still had access to the internet and to folders on my server machine. By the way, both machines pinged each other successfully with 4 replies. Sometimes restarting both server and client fixed the issue, or sometimes just re-running the scenery build again and Airac resolved the issue. This is the first time that I cannot. Just for the record, all routes are built in PFPX and exported.
Server build#56
Client build #73
Networked
Client
IP address :192.168.10.***
Subnet: 255.255.255.0
Windows 10 home 64
Webroot Antivirus disabled
Webroot firewall disabled
Windows firewall and antivirus are disabled
Server
IP address :192.168.10.***
subnet: 255.255.255.0
Windows 10 Professional 64
Webroot Antivirus disabled
Webroot firewall disabled
Windows firewall and antivirus are disabled
Port 13 enabled on server for both incoming and out going
Using IP (DHCP) instead of server name
-
Since upgrading to the latest build #73, EFB client no longer connects.I had this window running for almost an hour without any other activity. When it works, it works well. But there seems to be more connectivity problems than actual functionality. I have at least 2 days remaining for the DEMO and fear I won't get to use it. For this reason I'm opting out of the purchase. Too speedy and too many problems.
Troy
-
11 hours ago, lonewulf47 said:
No, please read about this in FAQ https://forum.aivlasoft.com/topic/2813-could-not-reach-any-date-server-port-13/
Appreciate it. Thank you.
Troy
-
See image: If I am seeing this often in the DEMO, will I expect to see this also in the purchased version?
Troy
-
4 hours ago, Mr. ATC said:
Hi Troy
Usually, nothing does happen occasionally. Especially if it's about software consisting of zeros and ones, the reacting is the same if the conditions are.
To better understand your issue, I would ask you to describe the initial status you start and then list the actions you do in EFB in order to create the undesired status. It's important we can follow each of your steps and try to reproduce the error. Can you also upload the flight plan file from PFPX you export?
Thank you very much
Jonas,
I followed the link below and figured it out. I wasn't aware that if you didn't end a previous flight without landing, then you would see these problems. The flight before with the CRJ 700 was having erratic behavior in mid flight, so I ended the flight prematurely. Obviously doing this made EFB client to think I was still airborne.
-
Occasionally after creating a flight plan from PFPX and exporting it to the designated folders, EFB client has difficulty finding the folder For instance , after I click FPL, the option for copy/paste becomes available. When I clear or cancel it in an attempt to create a flight plan, I am unable to select to select company routes or anything from the internet. Nothing happens. It acts like it is grayed out, and happens at least every other few flights. When I check my network connections, it looks fine and my settings shows the correct mapped folder for the routes. I have my virus and firewall turned off. Any thoughts as to why this happens? Log file included. Client version is 72; EFB server is 55
Troy
-
On 7/12/2018 at 1:24 PM, Mr. ATC said:
What exactly do you mean? Information about ATC is presented. But it's an EFB, a tool for pilots to make flying easier.
Yes and I really like it as it is. I use ProATC/X for ATC which I enjoy. But an all-in-one product would be superb, rather than having so many different apps running at once. You say "ATC is presented" already. Are you talking about other 3rd party, like ProATC/X etc.?
Troy
-
This is such an awesome product. Have you guys considered incorporating ATC into it?
Troy
-
On 7/2/2018 at 6:43 PM, bhorv67 said:
I was able to get it working.
Setup a folder on the PC PFPX is on that you're saving the flightplan to. Create networking sharing permissions on that folder, and you should be able to map it remotely on the client PC.
Thank you. Its up and running.
Troy
-
On 7/2/2018 at 12:45 PM, aivlasoft said:
The Server does not picking up anything. The routes will be created and maintained by the Client only.
You are right, but this only happened after the second update
-
22 hours ago, bhorv67 said:
In the previous version, I was able to export a flightplan from PFPX to a folder on the server computer, then have the EFB client map the remote folder to retrieve the flightplan across the network.
In V2, the instructions say to save the flightplan to the client computer - I'm having issues doing this. For some reason, I cannot setup network folder permissions to access the EFBv2 folder over the network. I realize that's not your issue, but is there a way to have the client look for flight plans in a user specified folder? I can't find a setting in the client to change the folder target.
Hey Brian have you figured out how to configure the network? I am having the same issues.
Troy
-
I have the same problem and is struggling with this. My client machine is currently communicating with the server, but when I share the folder routes folder from the client, my server is not picking it up. DO you have a suggestion?
Troy
-
Daniel,
Thank you very much. That worked. I did have to add the comservices.bin file directly into the Server\DbBuilder\Base\P3D4 folder for it to work properly without errors.
Thanks again.
Troy
-
I am just reporting this for now and do not have the opportunity or time to troubleshoot. The error in the image below is sporadic. Sometimes I get in and sometimes I cannot. Even with the server up and running, the client cannot connect. Thanks
Troy
Invalid Routing
in EFB v2 - Support forum
Posted
Yes I did. At least twice. In fact, I rebuild EFB database at least twice a week.