vealeww

USING P3DV4 AND WOA TRAFFIC. WHAT CHANGED? AND NOW NO HELP??

Previous version it all worked fine. (P3Dv4) now nothing. Really like the software but only if traffic works.

All of a sudden when loading the servier I get "UNABLE TO READ BEYOND THE END OF STREAM" error. Don't know what to do. wwv

Whoops, thought I had done that. after second try, EFB recognized the update and is now running. Thanks Wayne Veale

Spoke to soon. Everything loads up fine, I put in a flight plan and the EFB shows it, but it does not want to show the aircraft. Everything else seems to be ok. Just wont show my aircraft. I restarted DB and Client. Thanks Wayne Veale.

Good news, after three attempts, it worked. Thanks for your help as I don't think simming would be near the fun without the EFB. Thanks again. Wayne Veale

I re-downloaded both, ran install server as admin, ran db builder, ran client as admin. still having the issue. This PC is a Dell xps win 10 64. Been using XPS PC's for years and no problems. Nothing unique about the PC. I can do process all again and screen shot every error. Wayne Veale

I have stopped antivirus, firewall,etc. I also run as admin. I keep getting a error on what seeme like every file the install touches. ??? Wayne Veale

Got new computer, win10. Installed everything from Aivlasoft, but I get server db builder error and server does not install at all. Have fsx-se on the new pc in their common files. I have attached print screens. This continues on, so I quit the process. Thanks wwveale@gmil.com Moved to proper thread by Admin

Got it working again. I did not get an update server msg either. Followed the process above and it works. Will make notes to update the server, client, and, rebuild databases.. Even with minor problems like this, I really like the product and would not want to fly without it.

When loading EFB I got a new update message. I ran it and it seemed to install. Loaded database, VER 2.1 Version (build 106). Started the EFB and it has been hung on "installing Profiles". Been at this for over 5 minutes. Can hear the HD working. Not sure what's going on. wwveale@gmail.com

Looked through manual a couple times but could not fin explanation of two symbols on the map. 1st one blue dot with a small arrow next to it, 2nd red dot. they seem to always be on the flight path. Thanks WWV

Thanks for your help. Wayne Veale

just in case these would help. Wayne Veale Server_201810131217.txt.zip Client_201810131216.txt.zip

So, I restarted everything for the third time, and now it works. The only thing I noticed was an undefined aircraft warning, (although it was defined) I reselected it now the ac is in the right place. Anyway, So glad it's working again!!! Wayne Veale

So, I restarted everything for the third time, and now it works. The only thing I noticed was an undefined aircraft warning, (although it was defined) I reselected it now the ac is in the right place. Anyway, So glad it's working again!!! Wayne Veale

Sorry........ Wayne Veale

Running latest FSUIPC. License type: Full Expiration date: Never Serial-No: a8d2a205-994d-45c0-99b2-fba89284a9d1 Licensed to: Wayne Veale Mail address: wwveale@gmail.com Not sure why support files were dated 9/26/18 when I ran them on 10/13/18??? Shows FSUIP connected. current aircraft is on the runway at LAX... Not sure what else I can send you, please help me out because I really like the EFB. Thanks WWV

Running latest FSUIPC. License type: Full Expiration date: Never Serial-No: a8d2a205-994d-45c0-99b2-fba89284a9d1 Licensed to: Wayne Veale Mail address: wwveale@gmail.com Not sure why support files were dated 9/26/18 when I ran them on 10/13/18??? Shows FSUIP connected. current aircraft is on the runway at LAX... Not sure what else I can send you, please help me out because I really like the EFB. Thanks WWV AivlaSoft.Efb.SupportFile.exe AivlaSoft.Efb.SupportFile.exe

All of a sudden, my AC does not show up at the current position. I finally found it at a previous Airport. ie. I moved AC to LAX parking Position, selected LAX in EFB and it does not show AC there? It did before. FSX SE. Thanks. WWV

Hey, Thanks, learning every day. Wayne Veale Another question, if I get Navigraph Charts or Aerosoft Nav Data Pro, will they automatically sync with EFB for information to be current in EFB? Is there a timing consideration with this? Just asking how EFB gets updated with current info. OR, another way to put it in your comment- "In other words, as long as your EFB installation does not use the same cycle as other sites do, then differences are most likely. If you use the same cycle than other sites do, the differences should be minimal". How do I use "the same cycle?. Thanks Wayne Veale

EFB allows me to select SID's and Stars to a flight plan. Those are from within EFB. I then would like to specifically find out information about the SID or STAR EFB assigned like headings altitude etc. Since I cannot get that within EFB, I followed the suggestions on this forum and go to other sites to locate the details of the SID/STAR. ie. EFB assigned a SID out of KATL RWY 27R PNUTT5 (MCN) with I think PNUTT5 is the SID. I would now like to go to other sites (as suggested) Flightaware or Skyvector to get the details of the SID. When I get to either site, PNUTT5 is not listed as a SID. (I have tried different SIDS and STARS but do not know how to associate what EFB assigns (names) to actual SID/STAR on the other suggested sites. Example of what I'm looking at in EFB. Thanks for trying to help. Again, I'm new to SIDS and STARS, and in any case, I'm going to purchase the EFB... Wayne Veale

1. Love the EFB. I'm not new to FSX but new to SID, Star. In efb I load a SID and Star. I go to Flightaware or Skyvector to look for the EFB assigned SID or Star that EFB has assigned but, cannot find a way to associate the EFB assigned SID/STAR to these sites to view the procedure. Hding Att etc. I hope this makes sense. I would like to see detairl on the SID/STAR EFB assigns. Thanks WWV