mmaier41
-
Posts
76 -
Joined
-
Last visited
Posts posted by mmaier41
-
-
-
This link can maybe help you.
-
Maybe you should delete them.
-
Also read the EFB Operations Manual Page 16...
-
The same problem here.
Look at: http://www.navigraph.com/forum/viewtopic.php?f=30&t=4300#p18613
Manfred Maier
-
On 30.5.2016 at 3:18 PM, mmaier41 said:
-
Sehr geehrter Herr Schwarz,
Sie sind sicherlich nicht der 1te der Mega Airport Frankfurt 2.0 installiert hat und mit EFB sehr gut zurecht kommt.
Prüfen Sie doch eimal Ihre Scenery.cfg die ist in C:\ProgramData\Microsoft\FSX enthalten, so ähnliche Einträge wie
folgt sollten Sie finden:
-------------------------------------------------------------------------------
Title=Mega Airport Frankfurt 2.0 Terrain
Local=C:\Program Files (x86)\Microsoft Games\Microsoft Flight Simulator X\Aerosoft\\Mega Airport Frankfurt 2.0 TerrainTitle=Mega Airport Frankfurt 2.0 Airport
Local=C:\Program Files (x86)\Microsoft Games\Microsoft Flight Simulator X\Aerosoft\\Mega Airport Frankfurt 2.0 Airport--------------------------------------------------------------------------------
Ich schreibe in deutsch, da ich meine solche Aussagen wie " any circumstances. "
oder "a solution very soon" sind wenn man Hilfe benötigt nicht angebracht.
Manfred Maier
-
Hi Juergen,
i have hat the similar problem i solved this in the way
1. check your Aivla WPNAVAPT.txt (AIRAC cycle :1612 Vers.1)
if you see
TAMPA INTL KTPA01L11002007 27.963294 -82.542356108.9000700026
TAMPA INTL KTPA01R08300007 27.964311 -82.528992111.9500700026
TAMPA INTL KTPA10 06999097 27.970789 -82.534542000.0009700026
TAMPA INTL KTPA19L08300187 27.987128 -82.528214110.3018700026
TAMPA INTL KTPA19R11002187 27.993539 -82.541328108.5018700026
TAMPA INTL KTPA28 06999277 27.970247 -82.514417000.0027700026
then all runways are there, you d'not need the correction in Runways.txt2. Remove this from Aivla Runways.txt file
KTPA 09 10
KTPA 18L 19L
KTPA 18R 19R
KTPA 27 28
KTPA 36L 01L
KTPA 36R 01R
3. In EFB DataProvider -Data - make a "Simulator scenery data update"
4. In EFB DiplayUnit - System - Setting - Miscellaneous - make a "Reset airport data cache"
-
Hi Javier,
AivlaSoft.Efb.DateProvider.exe use .NET Framwork (4) check this,
maybe there is a missing or faulty file.
-
Is it possible to show the Depart-Time or the Approach-Time for the AI-Traffic.
I have my own airport with an ai-traffic configured with "Traffic360" and same
times i like to operate my PMDG737NGX among the ai-traffic for a bit better
realistic. I'm now with the FSX-SDK "Traffic toolbox" is this possible but i
do not will the simconnect more stress as absolutely necessary.
-
Hi Urs,
the case of upload limit has been cleared.
In the PROFILE there are same areas and the Number 4
is the source where the upload limits are described and handled.
Number 4 = Manage Attachments points out...
You have used 482.39KB of 500KB
You have 5 attachments (96% used)
Now can i delete all or same of my previous uploaded attachments.
Thanks for your patience.
-
Hi Urs,
thanks for the answer.
How is the upload limit in total per user, i ask this because i have uploaded in the past same pictures.
-
Hi Urs,
i have found on the last fly a small faulty display, not so important.
The FF lbs/hr is 4 X greater and the Tmax [hm/m] correspondingly smaller.
Another question: Why can i upload only 17.61KB?
Regards
Manfred Maier
-
Maybe there
C:\Users\xxxx\Documents\AivlaSoft\EFB\Navdata
-
Hi Urs,
the File
C:\Program Files (x86)\Microsoft Games\Microsoft Flight Simulator X\FlightBeam\KSFOHD\scenery\KSFOHD.bgl
is wrong.
I have this with ADE corrected and now looks good.
Maybe there is a update at FlightBeam (i have not searched for) ?
I have now learned, each Addon has his own strategy to handle the AIRAC data.
-
I'm not sure the wrong mapping seen before.
In use:
EFB 1.6.8.33245
AIRAC 1606 / Rev.1
C:\Program Files (x86)\Microsoft Games\Microsoft Flight Simulator X\FlightBeam\KSFOHD
C:\Users\Karin\Documents\AivlaSoft\EFB\Navdata\Navigraph FMS Data\NavData\WPNAVAID.txt = OK
C:\Users\Karin\Documents\AivlaSoft\EFB\Navdata\Navigraph FMS Data\NavData\WPNAVAPT.txt = OK
PRO-ATC/X 1.7.2.0
Here everything is Ok
-
Hi Yvan,
i have the same wrong runway description.
I'm using Aerosoft-Mega Airport Frankfurt.
To correct this, go to
C:\Users\xxxxxxxxx\Documents\AivlaSoft\EFB\UserData\Runways.txt
and delete the part EDDF. Then make in the DataProvider a "Simulater scenery data update"
is a submenu of "Data".
This has worked for me.
-
Hi Don,
i also use EFB-Modules-Library for show same charts.
I'm doing this with Navigraph Charts 5 by print a chart as pdf-file.
I don't know about the LINK you mentioned.
-
Hi Urs,
there is nothing no accident, nor anything else.
My normal Fly-Satus for FSX is with following ADDONS are active:
LINDA for control Saitek X52
ASN for weather
EFB for flyplane
PRO ATC-X for ATC and pre-flyplane
GTX groundservice
Accufeel for noise
and sametimes FS-FlightContol for Landing-Training ect.
All this addone's where not involved (not loaded) when i have checked this behavior.
I use two monitors M1=EFB and M2=FSX.
This is not vital, i will handle this by myself. two mouse click.
The Log shows two CLOSE-Situation. **********************************************************
2016-05-03 22:33:41.464 Debug ------- SimpleCam started ------- *************** FSX gestartet jedoch Flug noch nicht gestartet System-Close [X] *****************
2016-05-03 22:33:41.547 Debug Verify license
2016-05-03 22:33:42.510 Debug License successfully verified
2016-05-03 22:33:42.571 Debug Waiting for running simulator process ...
2016-05-03 22:33:48.116 Debug Connection to simulator is established
2016-05-03 22:34:18.355 Debug Simulator terminated by user [X] ******** OK *******
2016-05-03 22:34:18.384 Debug *** SimpleCam terminated
2016-05-03 22:34:18.405 Debug
2016-05-03 22:34:43.121 Debug ------- SimpleCam started ------- *************** FSX gestartet und Flug gestartet - Pause - System Close [X] *****************
2016-05-03 22:34:43.198 Debug Verify license
2016-05-03 22:34:44.184 Debug License successfully verified
2016-05-03 22:34:44.249 Debug Waiting for running simulator process ...
2016-05-03 22:34:49.811 Debug Connection to simulator is established
2016-05-03 22:35:56.637 Warning DefWndProc (isConnected=true): Ausnahme von HRESULT: 0xC000014B [X] ********* nicht OK ***********
2016-05-03 22:36:29.877 Debug UnsubscribeSystemEvents: COMException raised: Ausnahme von HRESULT: 0xC000014B ***** SimpleCam User beendet *****
2016-05-03 22:36:30.005 Debug *** SimpleCam terminated
2016-05-03 22:36:30.007 Debug
-
Hi, Urs and Oskar,
i'm back again with the same problem.
Same times will be closed most not.
Otherwise i am very statisfied with the functionality specifically with the PMDG 737NGX.
-
Hi Oskar,
many thanks for your answer
"UAC set to the lowest level" this was OK
"Properties Box set for "run as administator"" this was not set
After a System-Restart it seems to be ok.
-
Hi,
The Manual says:
"SimpleCam is starting automatically with the respective option active and also automatically closed
upon closing the simulator."No automatically closed by FSX on Windows 10.
Where can i look for clearing this problem.
-
Hi,
i'm back again with the solution.
In the SID i have used
SID SCRW05N RNW 05 TRK 049 UNTIL 410
instead of
SID SCRW05N RNW 05 HDG 049 UNTIL 2000
this topic can be closed.
Best Regards
Manfred Maier
-
Hi,
i have a SID Proplem with my own Airport EXXX.
Depart goes west but should be direction east and visa versa.
I'm using the same NAVDATA (SIDSTAR) EXXX.txt with PMDG and there the SID is ok.
Also with PROATCX the SID is ok (EXXX,xml structure is different to EXXX.txt)
All of the specified NAVDATA files are korrect modified
Where is my mistake or is there a bug in this very usefull pice of software.
I'm shourt before to buy a lisense, but this problem should be solved first.
My workaround was to modify Runways.txt to EXXX 05 23 then the SID was ok,
but my runway 05 was gone. Where and how can the direction goes false.
The pictures showes the problem.
Best regards
Manfred Maier
Prepar3D V4
in SimpleCam v1 - Support forum
Posted
Hi Urs,
with exe.xml will not load SimpleCam (32bit) but works well by outside access for Simulator P3D V4
The following is from Prepar3D Learning Center
Add-on Compilation Settings
For add-on libraries and executables, it is recommended that all software add-ons be developed using Visual Studio 2015. Further, the Platform Toolset should be set to v140 and the Targeted Framework should be .NET Framework Version 4.6.2. These settings will help ensure consistency and compatibility for all new development.
Regards
Manfred Maier