romair
-
Posts
37 -
Joined
-
Last visited
Posts posted by romair
-
-
Good morning Oski
Thanks for additional investigations.
I just followed exactly your instructions but still no success.
1. I tested again the URSS stock layout with ADE and so far there are no ILS same as you mentioned.
2. I tested again the URSS addon layout URSS_ADEX_ADE.BGL with ADE and as known there are both ILS having the green arrows and the correct frequencies.
3. I removed the URSS layout URSS_ADEX_ADE.BGL from my Sochi scenery folder and made an extra folder called URSS Sochi/scenery/containing the
URSS_ADEX_ADE.BGL and of course I added it to the scenery.cfg and I rebuilt the EFB Db. After openeing the EFB client still no ILS VOR app only.
I observed the client overview and the URSS_ADEX_ADE.BGL is existing. On the overview windows I selected Nearby navaids and there we have the ILS description.
In addition I also installed an other Sochi addon (54530-URSS-Sochi-FSX-Reload-V1.1.zip) taken from the same Russian server. This an earlier version
without having GSX and spotlights. I also tested this URSS_ADEX_ADE.BGL with ADE and both ILS are included. The same problem here, no ILS VOR only.
For me its not comprehensible. Other sourrounding airports such as URKA, URKK have their ILS when select with EFB.
I made a screenshot confirming my above statments but I could not attach this screenshot. Probably blocked by missing space on my account.
I have sent to already to your support mail adress.
Have a nice wekend Roger
-
Hello Oski
I like to reply about my Sochi problem.
I took the APX58160.bgl from a copied P3D from a older installation and replaced this layout on my working P3D. (newer PC )
So for still a negative result with missing the ILS frequencies.
I also installed a fresh downloaded Sochi scenery into my older PC which was not in use for 3 month.
I opened EFB client and there I have also no ILS available.
regardes Roger
-
1 hour ago, lonewulf47 said:
Roger,
We see an anomaly with the entry on line 2) in the airport information. In the example from your install it reads "Full" at the end whereas it shound read "Base". We therefore must assume that the regular "APX58160.bgl" was manipulated by your earlies FSAerodata experiments. I take it that you did not use SORS' regional updates for the ILS, such as the Russian Region for this BGL(see below).
Using this regional update could possible restore the "APX58160.bgl" to a useful state. It would be helpful if you could post the "APX58160.bgl" from your present installation to allow us a few tests,
Hello Oski
Thanks for reply.
After observing problems with fsaerodata I revert back to Aerosors and I deleted manipulated files visible in the 702 folder. (They were inactive)
I also can confirm that I installed all files again from Aerosors incl. Russia.
I have several older copies of APX58160.bgl on a older PC system and I have older copies of stored standard scenery folders.
I will try copies from there.
I will replay next Wednesday.
Have a good Sunday
Roger
-
-
H
ello Oski
Thanks for your reply. On my side there is still the same problem existing. I really don't see the ILS with their frequencies. What I see on the APP select button are the VOR which are not existing within the AFCAD.
The URSS layout ( URSS_ADEX_ADE.BGL ) is absolutely correct. I checked it several times and I also downloaded and installed this addon ones again without any changes.
I also installed the complet EFB software again.
As you can see on my screenshot I have the same layout bgl's loaded to be confirmed within the overwiev window.
Its really a complicated issue.
Don't spend to much time. It takes to much work.
Thanks again Roger
-
Hello Oski
The same for me. Out of any further ideas.
I also made a re-install of the whole EFB.
I also re-installed P3D v4 scenery and SORS again.
I checked again the stock and the addon URSS and both ILS and their frequencies are perfect implemented.
Anyway this is not a big issue because they have RNAV approches ( same as in the EFB ) and the ILS are working within the aircrafts.
Thanks for support and have a nice weekend.
regards Roger
-
Good morning Oski
Have many thanks for fast reply.
I have installed Hervé Sors' Navaid already for long time.
I checked the stock airport where the 2 ILS were missing.
I implemented both according to the addon layout and a real URSS approach chart and compiled them using ADE176.
For trial I also made a copy of the modified URSS stock layout and renamed it to URSS.bgl and moved it into your private layout folder.
After those actions I always applied a new database rebuild.
Still the ILS of URSS are not visible on EFB client.
Just for your reference all neigbour airports such as URKK and URKA having ILS can be selected on EFB client.
Further I have to inform that I several weeks ago tried to work with fsaerodata but soon after I recognized that fsaerodata can not be used with your EFB I revert back to
Hervé Sors' Navaid software.
I attached here a screenshot with the implemented URSS ILS and a copy of the airportFiles_P3D4.txt.
I appreciate your response
with regards Roger
-
Good morning EFB support.
If I want to select Sochi USSR O2 or O6 RWY arrival on the EFB ARR button I am missing the ILS frequencies for URSS.
There are only RNAV app available.
On the URSS addon and on the stock airport the correct ILS are implementend according to the approach charts.
On your own AFCAD layouts (https://forum.aivlasoft.com/topic/3005-afcad/) Sochi URSS is not yet available.
May I ask you to provide such a corrected AFCAD to be implemented to your privat AFCAD folder ?
I attached here the newest URSS layout for your reference.
Thanks in advance fore help.
Roger
-
My respect to the Aivlasoft gentlemens what they have developed for us how they support us.
For me one of the best addon I ever used for my sim planning. Would never miss it.
Roger
-
I also downloaded the ENHF.bgl from your list and it also works well in the EFB2 client.
Nick from ORBX closed this topic already.
Nick's last comment: There is a perfectly simple solution to the posted problem.
Yes this is a simple solution if you know it or if you a programmer or if you have a deep knowledge about layout design.
It is not always easy for a simmer to know whats going on with addons what is different between the various addon desgin technics etc.
Roger
-
Hello Oski
Have many thanks for this (for me fresh) information.
According to your link into your specfic thread which gives a clear information how to handle this so called privat designer specialities I have now the correct mapping of ENHF.
It was not nessesary to download this specific AFCAD. It is included in the FTX_EU_NOR_05_SCENERY folder.
I recognized on your list that mainly ORBX is taking this way of layout design.
According to your list I also have to take care about the other Norwegion airports provided by ORBX.
Again thanks for fast support and
best regards Roger
-
Dear Support
EFB2 cannot map the ORBX Hammerfest layout file (ENHF_ADEP2_FKH_P3D.bgl) located in the folder FTX_EU.
I asked ORBX for support and they informed that there is an other layout.bgl (ADE_FTX_NOR_ENHF.bgl) located at FTX_AA_ENHF within the FTX_EU.
which might be the right layout file to have the necessary dates for the EFB2 airport mapping.
I asked the ORBX support forum for help.
The thread is called : Aivlasoft EFB2 missing runway mappings at Hammerfest ENHF with screenshot included.
Can you pls. have a look into this thread and provide a solution to solve this specific ORBX Norway/Hammerfest problem.
thanks in advance Roger
-
Good morning Oski
I just had the same problem with missing ILS frequencies at Fiuminicino LIRF.
I just found your investigation and help within this threads here.
I also corrected the airport layout .bgl as instructed here and it works now perfect.
Thanks for your outstanding help and support.
regards Roger
-
Hello Peter
Can you pls. provide a link to the 8 pages of complaints ?
Roger
-
Hello Oski
Thanks for your fast support.
I deleted the scenery which was placed into P3D v4 using Add-on.xml manually. (To be seen on the screenshot on the first message)
I restarted the DbBuilder and the ORBX entry in the DB disappered and the DbBuilder worked again as usual.
I noticed the existing problem made by the central4 and I will wait to use central4 until we have better messages concerning the Add-on use.
regards Roger
-
Hello Experts
I just installed ORBX Lilydale YLiL Airport using their Add-on.xml.
DbBuilder stops to work at C:\Users\User\Orbx Library\p3dv4\YLIL Lilydale Airport\ORBX\FTX_AU\FTXAA_YLIL
DbBuilder can no more closed and must be shut down by using Task Manager function.
I could not find any faults in their path structure.
Need help
Thanks Roger
-
Hello Oski
Thanks a lot for your fast response and help.
I will follow your suggestion.
with kind regards Roger
-
Dear Support
I prefer to fly on Norway airports. ( many promoted by ORBX )
Some airports are missing in the EFB airport selection menue.
Hammerfest ENHF
Narvik ENNK
Sandane ENSD
Sognal ENSG
all other known Norwegian local and international airport are working.
What can be the reason that they can not be selected within the EFB ?
regards Roger
Moved to proper Forum by Admin
-
Hello Urs
Thanks for reply. I do hope that this could be implemented on a next update.
I am not the only simmer having this wish. It would be extremly helpful.
You may know that I am supporting many simmers up to the north of Germany and I have been introduce AivlaSoft EFB almost to all clients
if working with P3D.
An outstanding addon for the simmers.
regards Roger
-
Hello Urs and Oski
I do hope to get your response concerning save .pln into different folders.
with regards Roger
-
Hello Experts
I have a wish for the flightplans saved with .pln format.
With the menue "Save route" you can save into the AivlaSoft - routes folder with EFB flightplan format .efbr (good for working on fligfhtplans)
and we can safe under FSX/P3D .pln into any flightplan folder who serves FSX/P3D .pln or flightplan folders within addon aircrafts where .pln can be used with their FMC.
If you want to save .pln into an other than FSX/P3D folder (example: F:\Prepar3D v4\QualityWings\FlightPlans) you must change the route to the resp. flightplan folder.
May I ask you to create some more selectable fields where we can write .pln in different flightplan folder. (similar than in SimBrief downloader ?
Would be helpful.
regards Roger
-
Hello Support
I have installed Gibraltar LXGB from Aerosoft into the P3D v4.4 folder Ecosystem\Aerosoft as usual.
The airport is recognized by the P3D and working so far.
After building a a new EFB database still LXGB can't be selected into a new flightplan.
What could be the reason ?
regards Roger
-
Hello Oski
Thanks for your fast comment and advise.
I have now read Chaper 8.1 where its clearly mentioned about the display on the moving map.
The problem was caused by the button ARPT which was switch to off instead of on.
with kind regards Roger
-
Good morning EFB experts
Ones again, have many thanks for this outstanding EFBv2. No more headache planning SID and STARS.
I have a suggestion for the airports displayed on the moving map.
So far I recognized that the airports are displayed with a black dot and MIL airports have a black circle with a black dot inside.
The airport used on a flightplan have black and a green circle and the ICAO code is in red text.
Would it be possible display the black dot airports similar to the design like the MIL airports but with an other colour and
would it possible the display the ICAO code if you move the mouse over. A very small aircraft icon would also be more helpful to recognize
other airport.
with regards Roger
Missing ILS Frequencies at Sochi URSS
in EFB v2 - Support forum
Posted
Hello Oski
Thanks a lot for the investigation. Its really a funny story. I remember on the beginning of this topic I informed that the ILS and their frequencies works perfect
when tuning ILS approaches to URSS.
Anyway and anyhow I received a very good support and it satisfay my questionaries regarding EFB planning for URSS ILS approches.
I found a comment within the Navigraph forum:
Hi Sergey,
Yes the ILS's at URSS are not included in our source because the Missed Approach is prior to the runway threshold and is not included in our data feed due to ARINC 424 coding rules. Please see here.
Cheers Ian
Thanks again and regards Roger