tstemmer
-
Posts
18 -
Joined
-
Last visited
Posts posted by tstemmer
-
-
Hello Support-Team,
I get an error after updating the EFB to the new version (V2.2 build #122).
I start the Server with administrator rights, also restarted my PC after updating the application. But the error still exist.
I attached the "server Logfile".
What's the problem, what can I do?
Best regards
Thomas
-
Good morning,
that sounds perfect and a good solution ;-).
Best regards
Thomas
-
hm, this problem is also here in my EFB with vpilot and flying on VATSIM.
I see f.e. all ATC stations around me, (LRUB_CTR) but not ADR_E_CTR/ADR_W_CTR. But: on the radio-panel these Callsign (ADR_E_CTR) is shown correctly.
-
Of course, I can. I've done this instructions:
QuoteGo to the download link on the avilasoft hp to download the Vatsim Data files. Then extract those files to C:\Users\[Name]\Documents\Aivlasoft\EFB\UserData\Online\Vatsim. Now load up your DisplayUnit and in Settings under the Online tab, point the "Vatsim boundries file" to the fir.dat file and the "VATSIM definitions file" to the servinfo.dat
Now, when you setup a flight in Aivlasoft, under the Aircraft you select there will be an "Vatsim Online" thing or something like that, click on the "Check" button and click start, it will load up the Vatsim controllers and whatnot. Then when you are flying it will automatically update and may advise you to switch frequencies or on the map, you can view the other traffic by clicking on the "TFC" button on the Menu when you are in the Progress page.
Now I am located at EGCN, London Control (LON_W_CTR) is online and it seems, that he is responsible for me. But he is'nt. If i look via vattastic, I see the differences of the "sector files" (I hope I have described it fairly clearly., my english is not the best ;).
-
Hello,
when I'm flying online on VATSIM, EFB doesn't show the right sectors? For example: I fly from LDDU to EDDP. On start, ADR_CTR is my controller (and he is online), but when I look on my EFB-Screen, there is no active controller shown. Maybe the files fir.dat and/or servinfo.dat (from your download-section, i.e. fir.dat date = 2013-05-02) is outdated?
where can I download new sector-files?
Regards
Thomas
-
Hm.... I have reinstalled the whole EFB-system.... now it works...
-
Good morning,
since today I can't start aivlasoft anymore.
I use v1.6.15.15941 with AIRAC 1803. If i start the DataProvider, always will be shown this exception message:
See the end of this message for details on invoking
just-in-time (JIT) debugging instead of this dialog box.************** Exception Text **************
System.Net.Sockets.SocketException (0x80004005): Only one usage of each socket address (protocol/network address/port) is normally permitted
at System.Net.Sockets.Socket.DoBind(EndPoint endPointSnapshot, SocketAddress socketAddress)
at System.Net.Sockets.Socket.Bind(EndPoint localEP)
at System.Net.Sockets.TcpListener.Start(Int32 backlog)
at er.b(IPEndPoint A_0)
at h8.a(h9 A_0)
at fg.e()
at fg.a(Object A_0, EventArgs A_1)
at System.Windows.Forms.Timer.OnTick(EventArgs e)
at System.Windows.Forms.Timer.TimerNativeWindow.WndProc(Message& m)
at System.Windows.Forms.NativeWindow.Callback(IntPtr hWnd, Int32 msg, IntPtr wparam, IntPtr lparam)...AivlaSoft.Efb.Common
Assembly Version: 1.6.15.15941
Win32 Version: 1.6.15.0
CodeBase: file:///C:/Program%20Files%20(x86)/AivlaSoft/EFB/AivlaSoft.Efb.Common.DLLUsing Windows 10 Pro (64bit) actual Patch from today.I have restartet my PC, running DataProvider as Admin and as Non-Admin....Help!Best RegardsThomas -
Sorry, Urs, I used this function, but I don't find the solution ;-(
What have I done?
1. Installed EGCC
2. Modified the runways.txt (as described above)
3. airport-cache cleared into the display unit
4. restarted display unit and data provider
What's happend?
- if I will fly from EGCC to somewhere else: SID on EGCC not available
- if I will fly to EGCC from somewhere else: STAR on EGCC is available, but no ILS/RNAV-Approach
... which solution is correct, if I use the search-function correctly?
Regards
Tom
-
Good morning,
I bought Manchester EGCC from UK2000 and wanted to plan EGLL to EGCC. I have changed the airport.txt:
EGCC 06R 05R
EGCC 24L 23L
EGCC 06L 05L
EGCC 24R 23RI missed the STAR/SID-Procedures. In "EGCC Departure" the "Select SID" was greyed out.
AIRAC is 07DEC03JAN/18 . How can I fix this issue?
Best regards
Thomas
-
But this runway exists in my FSX (because LIRF is an addon which will bring the correct runway into the fsx). Or does it mean, when a runway does not exist into the fsx default scenery?
-
Is there a solution to bring the runway 16C/34C on the chart? I only read a solution to "fix" the warning-message (in this case to set the lines "LIRF 16C nil and LIRF 34C nil" into the runway.txt), but this do not bring the runway on the screen?
-
Hello,
I have the Add-On "Mega Airport Rome" with the new Runway 16C/34C.
Now I know to update the runways.txt, but I don't see the new Runway into the DU. There is now warning-message, but also now runway. In DU I see the old Taxyway "D", where now is placed the runway 16C/34C.
How can I fix this correct into the runways.txt?
Maybe it's a good idea to start a topic into "FAQ" for the correct update of runways.txt for each new AddOn?
Best regards
Thomas
-
Hello Urs,
EFB is crashed on my pc (the first time!). Do you need this exception reasons?
--- Log 1:
Anwendung: AivlaSoft.Efb.DataProvider.exeFrameworkversion: v4.0.30319Beschreibung: Der Prozess wurde aufgrund einer unbehandelten Ausnahme beendet.Ausnahmeinformationen: System.ArgumentExceptionbei ic.a(em)bei ic.g()bei ic.f()bei System.Threading.ThreadHelper.ThreadStart_Context(System.Object)bei System.Threading.ExecutionContext.RunInternal(System.Threading.ExecutionContext, System.Threading.ContextCallback, System.Object, Boolean)bei System.Threading.ExecutionContext.Run(System.Threading.ExecutionContext, System.Threading.ContextCallback, System.Object, Boolean)bei System.Threading.ExecutionContext.Run(System.Threading.ExecutionContext, System.Threading.ContextCallback, System.Object)bei System.Threading.ThreadHelper.ThreadStart()--- Log 2:Name der fehlerhaften Anwendung: AivlaSoft.Efb.DataProvider.exe, Version: 1.6.5.18356, Zeitstempel: 0x5610ef16Name des fehlerhaften Moduls: KERNELBASE.dll, Version: 10.0.10586.0, Zeitstempel: 0x5632da1cAusnahmecode: 0xe0434352Fehleroffset: 0x000bd8a8ID des fehlerhaften Prozesses: 0x299cStartzeit der fehlerhaften Anwendung: 0x01d12a6d7e81a791Pfad der fehlerhaften Anwendung: E:\simulation\AivlaSoft\EFB\AivlaSoft.Efb.DataProvider.exePfad des fehlerhaften Moduls: C:\WINDOWS\SYSTEM32\KERNELBASE.dllBerichtskennung: ba219905-5f76-4b89-89ec-4dfbd839f1d0Vollständiger Name des fehlerhaften Pakets:Anwendungs-ID, die relativ zum fehlerhaften Paket ist:I use FSX:SE, Airbus Extended X (flying with the A320), GSX.
Best regards
Thomas
-
Hello Urs,
and what is the solution? I have the same problem in a network-connection. If I run the DU on the flying PC, it is stable. I use a wireless connection, but the wlan is also stable. So the only solution is to bring EFB back to the Sim-PC?
I do not have any problems with the disconnection, when the DU will get into the Progress-Windows, but after the disconnect I have to press the Progress-Button. So one workaround is, that the DU will show the Progress-Screen after a disconnection. Is this possible?
Regards,
Thomas
-
I have a problem: when the DU sometimes can't connect to the host, it reset the "DU" to default pathes, like "C:\users\.... \EFB". So I have to change it back to "\\server\users\...\EFB"... (for exemple). Is it possible, that "DU" doesn't change my settings?
-
Guten Mittag,
wieso wird hier eigentlich nur in englisch geschrieben?
Egal: folgendes "Problem": wenn die DU sich mal nicht mit dem Host connecten kann, verliert diese plötzlich alle vorher eingestellten "Pfade", zumindest, wenn vorher die Fehlermeldung "DataProvider folder doesn't exist, or is not available" angezeigt wird.
Kann man die Pfade irgendwo fix einstellen, dass sich nichts mehr ändert oder auf "Default" geändert wird? Das kommt bei mir immer dann vor, wenn ab und zu sich das Netzwerk aufhängt (z.B. WLAN nicht verfügbar ist) und die verwendeten Netzwerklaufpfade temporär nicht verfügbar sind.
Grüße
Thomas
-
Hello Community,
because I switched from FSX to FSX-Steam, I deinstalled the EFB DataProvider (this component was running on my "fliying-pc".
Because some folders are not removed from the system, I removed them manually.
Now, the FSX-Steam is on my computer (and the FSX is removed from it), I can't install the DataProvider: on the menu "Select components to install" i can't activate the "DataProvider", I only can install the AIRAC cyles and the DisplayUnit.
What can I do? Deleting all registry-entrys?
I use Windows 10.
Greetings
Thomas
Error Msg "Could not start because TCPListener throws an exception"
in EFB v2 - Support forum
Posted
Good morning,
ok, after restarting the PC again (and after a while "non-flighing-days", now it works. Thanks,
best regards
Thomas