petrsurf

No actually I did not I use paper chart for this airports . However I can see that there is solution to that . I ll try to search Avsim . Thanks for tip . cheers Petr

Thanks ,look forward

Hi I would like to ask if it would be possible to use checklist in some kind of memory . what I mean is that if you running lets say preflight checklist and atc gave you start as you switch to daparture screen and then back to continue with preflight checklist ,you haqve to start again . It kind of dont remember where you left previously . I think the elecronic checklist is good in precisly this so pilot dont skip something or dont have to go again whole page . Thanks Petr

Hi Travis just downloaded install and just about to make first flight with fcdu , but from firts look well done this is must have cheers very much . Thnaks Petr

Hi that would be great looking forward to it . Cheers Petr

Hi any chance for QW avro checklist please ?

Hi sorry I missed this topic . I have same problem after install . I did change RW numbers but taxi way no idea how to fix . Can you tell me please if there was any fix to it wrom developers . Thanks Petr

Mate that's strange I have it untick all the time . My synch is done by fsinn at the beginning in case I pause sim so I don't get penalty from fscaptain for being late . So I wouldn't say thats my issue . I flew yesterday 10 hours flight no probs . I took off early in the morning European time and landed afternoon in Africa . All the way only a few traffic . So to me problem is in displaying too much traffic to diferent apps at the same time . Thanks Petr

Hi look guys I have done few more flights since that happened , and my flying is on vatsim so I use fsnn . To what i think and try when on vatsim and is busy time I mean location and because I use UT2 set to 60% airliners and GA to 40% moslty time when something strange happened with displaying traffic on EFB is when screen gets full of the traffic . Last flight I have started in a busy KPHL quite a few vatsim traffic so after taxing ready for take off I stopped UT2 traffic and I ahd no problem what so ever. When actually strangelly enough this issue happened , FSFK shows traffic no problem ,fsx shows traffic no problem so one of my thoughts is simmconnect can't keep up with lots of data beeing fetch to different application. An other one in my case it would be in UT2 traffic you can set when traffic is beeing display ,what distance ,how many at any given time . Perhaps there is a glitch . I don't know I am just speculating . It's still works fine. What I would recommend to try when busy nd you are flying vatsim just turn AI off and see whats happend . Let me know .Cheers Petr

Hi I am sorry I see I write it little bit wrong . My apology. What I was trying to ask if there could be possibilities that simconnect supply data for 3 screens ( FSX,FSFK EFB) Perhaps that data has to handle over to display is more then the speed of simconnect ? I don't really follow this coding that is why I was asking . Why traffic is always display on FSFK ,but 20% of the time is missing on EFB screen . Is there any way how to test simmonect if there is anything corrupted perhaps? Please don't get me wrong I am very happy with your product . Thanks Petr

there is additional error log to previous post Faulting application name: fsx.exe, version: 10.0.61637.0, time stamp: 0x46fadb14 Faulting module name: TCAS2v7.dll, version: 1.1.6.0, time stamp: 0x4633aecd Exception code: 0xc0000005 Fault offset: 0x00006186 Faulting process id: 0x1d58 Faulting application start time: 0x01cd67a726a204b3 Faulting application path: C:\Program Files (x86)\Microsoft Games\Microsoft Flight Simulator X\fsx.exe Faulting module path: C:\Program Files (x86)\Microsoft Games\Microsoft Flight Simulator X\TCAS2v7.dll Report Id: 4ae8c3a5-d3de-11e1-99b4-002683165439

Hi just want to ask if there is any possible fix to disappearing traffic . yesterday I flew from KPHL to EBGL . well all started normal ,but after while I had couple of Traffic on EFB but many more on fsflightkeeper and visibly in the air. to make matters worst I got CTD just on final when EFB stop showing traffic at all and TCAS on pmdg was from time to time showing some conflicted traffic ,but nothing to see out the window . How ever PMDG 747 I think is getting all traffic from fsuipc . Fsflightkeeper I think using simconnect . Could have this been an issue using traffic on both like FSFK and EFB via simconnect. well and lastly 200 feet AGL on final I got CTD after 3 weeks . The error didn't copied it down ,but there was something like Tcas2 dll error . I might test next time to turn OFF tcas on FSFK perhaps .

Thanks for quick reply I will look into it . Cheers Petr

Hi I update Sid and stars from navigraph 1206 , but when I was flying from eggs fmc shows available SIDS for departure but in efb there was nothing . How could that be ? Also would it be possible next landing frequences and landing nav. Have a option to display all available departures and arrivals as a only written names of stars and sids . I thing would make easier as when online sometimes the radio is not quite as clear as one would wants so is easier to see all names in front when taking down arrival or departure clearance just to confirm with controller .cheers petr

Hi ,well I used to fly on vatsim with traffic sliders off and same settings in UT2 , but after while I got bored as you fly lots of times into ghost town. It did only display vatsim traffic . I think that is the way fsinn inject traffic with UT2 texture . I don't mind seeing both traffic at the same time just if there would be chance to have them somehow recognize by different colored or something . Cheers Petr

I am running fsinn if you have a look at AI monitor you will notice that on aircraft has no departure and arrival only speed altitude that is someone online confirm by fsinn radar 100% , but on radar shot the one with departure and arrival is vatsim by fsinn and therest with question marks is fsx ut2 AI trafic . Not realy making any sence I think I try to reinstal fsinn . Cheers petr

Here it is cheers petr it seems little odd ftx traffic is use to display vatsim traffic but fsx AI uses UT2. I think might have something to do with patch i did some time ago to display more accuratelly vatsim traffic (texture ) so would have given more texture to fsinn traffic . It seems this thing is preventing display UT2 texture for fsinn traffic .

Thanks for answer . As have Said before it is terrific application . Cheers petr have a good day

Hi im using fs captain with fs flight keeper for tracking for VA but non of them can actualy know what have what face of the flight you are in . As approuch taxing on ground, departure, step climb , arrival with efb it would accurate as you always update any changes to your flight plann . With this two will never happened unless you manualy select appropriate announcement . It is still good thought but perhaps one day there would be more flexibility to when and what to announce . Cheers petr

Hi firstly I must say I am happy I have purchased efb it is really no enhancement and useful tool as for off line and online flying . My question is regarding to sound anhancement where so far there are two option for sound when activating plan and when waypoint reached. Will there be any options in the future for more like when on taxi way clear for take of could be play, cruise altitude , descent, transition etc . Many different flight situation are recognize when flying and I am sure users would have a chance to add they preferable announcement . As I say at first I am happy with efb and there are surely more importante things to deal with . Cheers petr

Thanks for info I will try to drop them a post . Cheers petr

Hi I have the same when flying on line some planes shows full details dep. arr. fl. Speed. And fsx AI UT2 traffic just departure speed altitude and for arrival only ?????? I think perhaps is not readable where AI is flying to as long as vatsim traffic has is full details . I wish there is a colore different the one with full flight plan so I don,t just ignore them . Hope that help Cheere petr fsbuild does different work flight plan and fuel calculation very accurate u can not do it in efb .

Hi to all . I have bought 3 airports from imagine vhhh, Katl , wass , but vhhh airport doesn't show any taxiway or gate when in efb only grey shape of the airport with two runways in it . When taxing fs flightkeeper aicars shows all runway . I am sure this more like question for imagine developer ., but has anybody had the same issue ? Also when choosing gate for free flight in fsx there are all gates . I thing perhaps the afcad it self has some strange coding . Cheers petr

Thanks for help I will send it.

Hi yes I have all the time . I would have thought when vatsim traffic then fsx Ai is not display , but not in my case . Cheers Petr