Jump to content

felice52

Members
 View Profile  See their activity

  • Posts

    26

  • Joined

  • Last visited

 Content Type 

Posts posted by felice52

    VATSIM Freq Question

    in EFB v1 (Read only, no longer supported)

    Posted

    Hi Urs

     

    As mentioned above EFB is showing the UNICOM frequency 122.80. This frequency is correct except for Brazil and South Africa.

     

    https://forums.vatsim.net/viewtopic.php?f=84&t=38243 says:

     

    «In the case of Brazil and South Africa, different frequencies are used because 122.800 is a frequency used by ATC in those countries and published charts and procedures detail 122.800 for use. The designated UNICOM frequency in Brazil is 123.450, in South Africa it is 124.800.»

     

    Is it possible to ad that on a next version of EFB?

     

    Regards

    Felix

    Camera Standard Zoom

    in SimpleCam v1 - Support forum

    Posted

    Hi Urs

     

    Thank you for your input. I did a flight today with «initialZoom» of  1.2 and will try another one with 1.4 tomorrow.  The view is much better now and I have  just a little distortion. I will try some more settings but I am confident it will work out. Anyway, I did by the license. Two coffees less for me next week :-P 

     

    Regards

    Felix

    Camera Standard Zoom

    in SimpleCam v1 - Support forum

    Posted

    Hi Urs

    I am testing SimpleCam and I am quite happy with the functionality but ....

     

    I am using 3 Screens as Visuals, no panels as I have them as hardware. Now, to get a more or less believable view out of the cockpit, I have to set the Zoom for the camara1 in the FLT file to 1.25.

    With the standard zoom settings, that SimpleCam is using  the view out of the cockpit on the left and right hand side is too much distorted. I am verry sorry about that, but it seems that I have to deinstall this little program. Or is there a solution I am not aware off?

     

    Regards

    Felix     

    Display Unit can't reach the Data Provider

    in EFB v1 (Read only, no longer supported)

    Posted

    The smiley was a bit too early. Same problem again. Data provider is running and the Display Unit can't reach the data provider. First I thought that GEX is blocking the connection so removed GEX from my PC. But this didn't helped either . So I am stuck again.

    I am running EFB on a Network and I didn't had any problems for the past 12 months. I also remarked, when the system was running yesterday, that the speed of the aircraft on the VATSIM Network was much faster than normal.

     

    Happy Landing

    Felix

    LSGG SIROD DEP

    in EFB v1 (Read only, no longer supported)

    Posted

    With RWY05 in use, all aircraft to Paris and England get the SIROD5 departure. The departure is described as follows: «Climb on GVA R-046. When passing 7000', but not before D8 GVA turn LEFT, 360 degree track. Intercept DJL R130 inbound to SIROD.»

     

    In EFB the SID starts at the end of RWY23 with a left hand turn, then parallel to the runway to reach SIROD somehow. Can this be fixed?

     

    Happy Landing

    Electronic Flight Bag & FSInn

    in EFB v1 (Read only, no longer supported)

    Posted

    After activating the Flight Plan in EFB the routing is getting more detailed (adding all NAV Fixes) as needed to fly that route with help of the GPS. But this information is also forwarded to the VATSIM Network. After selecting and activation of the SID for LIRP this changes to (4) an on VATspy (5).

    [attachment=1]Flugplan mit SID.jpg[/attachment]

    [attachment=0]vatspy 2.jpg[/attachment]

     

    What the Controllers want to see is the route string plain out of VATrout or equivalent (e.g. Vroutes) as on Print Screen 1,2and 3. I have to add that there was no controller online to add the SID to the flight plan on the VATSIM Server.

     

    For me it seems that EFB is writing something into FSX and FSInn is reading that information and pushing the changed information onto the Network Servers. Maybe Wycliffe has more information on the internals of FSInn and what is happening here?

     

    Thank you for your patience.

    Regards

    Felix

    Electronic Flight Bag & FSInn

    in EFB v1 (Read only, no longer supported)

    Posted

    Hallo again

     

    Here are an example what I trying to express in my first post.

     

    Today I flew from LIRP to LSZH. The flight plan I took from VATrout using the facility provided within EFB.

     

    The flight plan from VATrout reads as follows: FRZ UL995 CANNE UZ657 KELIP

     

    This is what I see on the ATS Routing window in EFB

     

    [attachment=2]EFB_initial.jpg[/attachment]

     

    and what I am submitting via FSInn (2) on connecting to the VATSIM Network.

     

    [attachment=1]flugplan fsinn.jpg[/attachment]

     

    Checking VATSpy (3) the route looks the same.

     

    [attachment=0]vatspy 1.jpg[/attachment]

     

    more on the next post

    Electronic Flight Bag & FSInn

    in EFB v1 (Read only, no longer supported)

    Posted

    Hallo

     

    When I am flying online on vatsim I have to submit my flight plan as ATS Routing. Checking the flight plan on VAT-Spy after connection with the network I see the flight plan as submitted.

     

    After the selection and activation of the corresponding SID for takeoff or a STAR for landing and checking the flight plan again on VATSpy, I often see the detailed route with all the Navigation Fixes including all waypoints of the selected SID or the STAR.

     

    Normally the ATC Controllers are not happy if they see such detailed routes. I am searching for a solution to that problem.

     

    Any idea how to solve that? Has this something to do with the activation of the «Create Garmin GPS flight plans» option? Must I deactivate this option? As I often fly with the PC12, I am using EFB as main GPS navi-gation source on IFR flights. Deactivating the Garmin GPS option would pose some other problems for me to solve.

     

    I am running FSX and the Data Provider on one PC with W7 Prof, the Display Unite on a second PC with XP Prof and on a laptop there is FSInn and VAT-Spy running (W7 Home).

     

    Best regards

    Felix

    runway.txt not found

    in EFB v1 (Read only, no longer supported)

    Posted

    I running EFB in Demo Mode. The DataProvider is running on one computer with Windows7 Professional German and the Display Unit on a second PC with XP Professional also in German.

     

    When I am want to get the Airport Data with the DisplayUnit I got an error message from the Net Framework on the PC where the DataProvider and FSX is running. The Message says, that the runway.txt couldn't be found on C:\User\....\documents\AivlaSoft\EFB\UserData. I can't find this file under UserData.

    Under C:\Benutzer\....\Dokumente\AivlaSoft\EFB\UserData I just find the Sound Folder.

     

    On the PC witch is running the DisplayUnit there are 6 Folders but not such File.

     

    Where can I find this file? Will it be automatically generated or is there a standard file somewhere? Is there an ini - file where the Path must be corrected?

     

    Thank you for your help.

    Felice52

×
×
  • Create New...