[FS2020 The path is too long.]

Good morning,
I'm having a lot of difficulty updating my FS2020 scenery inside EFBv2.
The path is too long.
Do you have a way to enable this update WITHOUT moving the Packages folder?
THANKS

[ATC Ribbon missing controller message]

Hello,
Following your answers I have just found the solution to this problem.
I am on IVAO and indeed the ATIS message does not appear (no small squares..).
I connected to VATSIM and then everything appears...
This is an IVAO problem and not the program.
Thank you very much for your help
Best regards

[ATC Ribbon missing controller message]

Hello,
Thank you for that answer.
Indeed, when I pass on the name of the sector controlled example LEBB_TWR I show the ID of the controller and its connection time.
Conversely, when I switch to the frequency of this controller, for example 118.5, the ATIS message no longer appears... How do I make it reappear?

[ATC Ribbon missing controller message]

Hello,
A little over a month ago, when I launched the RADIO, after loading my flight plan, the ATC Ribbon indicated the frequencies AND by passing the mouse over this frequency I read the message from the QNH runway controller in use ...Currently I just see a message like 401226 0:06 .
How to get this info, I couldn't find anything in the customer service settings
Thank you all

[No traffic in Traffic Monitor until vpilot connects]

Thank you
Now for me everything is clear
Good night and see you soon

[No traffic in Traffic Monitor until vpilot connects]

Hello,
Thank you very much for this prompt answer, but unfortunately I do not understand your answer.
should I run P3DV4? Is it in OPTIONS?
You see, I'm not very good at it and you have to hold your hand to make this manipulation happen.
Thank you for communicating the procedure in detail
Good night
Jean de Bordeaux

[No traffic in Traffic Monitor until vpilot connects]

Hello,

Where will I find:  "home/free flight"  in sim ?

On P3DV4 or EFBv2 ?

Thank you

Jean de Bordeaux

[server error]

OK thank you

All is perfect

Bye Bye

[server error]

and

[server error]

Thank you,

Now i have a new message in server....

[server error]

Bonjour,
I am beginning to despair of this program so promising.
1- impossible to operate the DEM version
2 So I bought the paid version and 3 times out of four he presents me this message "denied access"
What should I do ?
however, I update each time (v 2.53) and proceed with the reconstruction of the datas
I despair and consider very seriously to ask for reimbursement ...
Best regards

Jeans

[server error]

On 7/4/2018 at 11:18 AM, aivlasoft said:

Thanks for the log files. I had a look into it. The following errors should be fixed before a next attempt to build the database:

 

"C:\Users\hilki\Documents\Prepar3D v4 Add-ons\PKSIM-Barranquilla\add-on.xml" points to the missing path "C:\Users\hilki\Documents\Prepar3D v4 Add-ons\PKSIM-Barranquilla\scenery"

The file "add-ons.cfg" in "C:\Users\hilki\AppData\Roaming\Lockheed Martin\Prepar3D v4" points to missing paths:
[Package.19]
FOLDER DOESN'T EXIST: 'C:\Users\hilki\Documents\Prepar3D v4 Add-ons\PKSIM-Barranquilla\scenery'. Found in 'C:\Users\hilki\Documents\Prepar3D v4 Add-ons\PKSIM-Barranquilla\add-on.xml'
FOLDER DOESN'T EXIST: 'C:\Users\hilki\Documents\Prepar3D v4 Add-ons\PKSIM-Barranquilla\scenery'. Found in 'C:\Users\hilki\Documents\Prepar3D v4 Add-ons\PKSIM-Barranquilla\add-on.xml' ... (repeated)

 

Another error, found in the Windows Event log, is most probably an indication that something with the .NET installation on your computer is not OK:

 

.NET Runtime, 1023, Error, 7/3/2018 8:40:47 AM
Application: AivlaSoft.Efb.DbBuilder.exe
Framework Version: v4.0.30319
Description: The process was terminated due to an internal error in the .NET Runtime at IP 00007FF883001C0F (00007FF882E60000) with exit code 80131506.

 

 

 

Bonjour,
I am beginning to despair of this program so promising.
1- impossible to operate the DEM version
2 So I bought the paid version and 3 times out of four he presents me this message "denied access"
What should I do ?
however, I update each time (v 2.53) and proceed with the reconstruction of the datas
I despair and consider very seriously to ask for reimbursement ...
Best regards

Jean

[NO SID STAR airport TFFF & TFFR]

hello,

 

I'm sorry, I just solved my problem by adding the file wpnavapt a copy of the lines of the old tracks and replacing QFU the new one.

Everything works very properly now.

 

Best regards and happy holidays

[NO SID STAR airport TFFF & TFFR]

Hello,

 

i don't find SID & StAR for airport TFFF and TFFR

I have change the old rw in new heading rw

 

Thank you

[LEMD Bad T/O rw]

Screen Airport information

 

good weekend

[LEMD Bad T/O rw]

To day the wind is correct for rw14L or 14 r but it is impossible to select this runways

see sreen joint

in inforation airport this runways are indicated T/O yes

[LEMD Bad T/O rw]

Now you can see screen LEMD without dimensions rw 14L 14R 32L and 32R

 

Why ?

 

Regards

[LEMD Bad T/O rw]

Sreen LEMD[attachment=0]Select SID LEMD.PNG[/attachment]

[LEMD Bad T/O rw]

Hello,

 

My question was:

Why on ech EHAM SID Select all runways appear with their dimensions with LEMD then there's runways 18L than 36L and 18R 36R which are mentioned?

The two scenes of proviennt AEROSFT.

 

Regards

Jean

[LEMD Bad T/O rw]

Hello,

 

I have these lines in my\Documents\AivlaSoft\EFB\UserData\runways.txt file

 

LEMD 15R 14R

LEMD 15L 14L

LEMD 33L 32L

LEMD 33R 32R

LEMD 18L 18L

LEMD 18R 18R

LEMD 36L 36L

LEMD 18R 18R

 

Now, the wind is 280 and it is impoosible to verify good rw

 

I'm waiting wind correct and i will come back to you

 

just a little question:

on screen select departure i see dimensions rw only for 36L, 36R, 18 L and 18 R

on screen airport information all dimensions rw are correct...

 

See you later,

 

best regard

 

Jean

[LEMD Bad T/O rw]

Hello,

 

i have used AFX to change rw

Now i have:

14 R Yes T/O and No landing

14 L Yes T/O and No landing

36 R Yes T/O and No landing

36 L Yes T/O and No landing

 

18 L No T/O and Yes landing

18 R No T/O and Yes landing

32 R No T/O and Yes landing

32 L No T/O and Yes landing

 

I have lauuched FSX and shutdown

I have launched EFB and launched data

After reconnection i have always RW 36 L and 36 R for departure withe wind 230

on screen i read 14L 14 R better rw for departure

 

Why it is imposible to select rw 14 R or L?

 

Bye Bye

[LEMD Bad T/O rw]

Yes,

 

I'm waiting reponse

 

[LEMD Bad T/O rw]

Same problem with rw

At LEMD, when the wind is 230° i seen departure only rw 36L and 36R

In edit information Airport LEMD, the rw are set

18 R; yes t/o; no landing in reality is ;no t/o; and yes landing

18 L; yes t/o; no landing in reality is ;no t/o; and yes landing

Thank you

 

Jean

[LEMD Bad T/O rw]

Hello,

 

I have the last mega airport madrid v103 (Aerosoft).

I have updated to day aivlasoft EFB

At LEMD, when the wind is 230° i seen departure only rw 36L and 36R

In edit information Airport LEMD, the rw are set

14 R; no t/o; yes landing in reality is ;yes t/o; and no landing

14 L; no t/o; yes landing in reality is ;yes t/o; and no landing

How is it possible to modify ?

 

Thank you

[No display Airports on Chart Enroute]

Hello,

 

I just solved my problem by reading the documentation for the software better.

In fact an update of the scene was deleted Aerosoft MADRID tracks in question ...

If it can be used for other ...

 

@ +

 

Jean de Bordeaux