When setting .700 frequencies it jumps to 80 and locks pmdg 737 ngxu

[victoroos]

HI all,

 

I love the v2 app. And it's udpates.

However, I have one question. I wanted to tune EHAM delivery 121.970.

However, when I do that, my radio stack shows 980 and when I try to switch it to 970 it jumps to 950 (skipping the 970 it should show).

 

This can only be fixed when I tune a frequency that is a "round" frequency (eham has enough luckily) and then tune it by hand.

 

is anyone else experiencing these problems. it is..really weird.

 

I tested it in the NGXU with the latest EFB update.

 

cheers

victor

[aivlasoft]

Hi Victor,

thanks for the good words on EFB.

121.970 is an invalid frequency. Only .975 is valid (for 25 kHz and 8.33 kHz). But anyway, it depends on the radio stack whether it is capable of displaying a frequency like 121.975.

You can check the Server's logfile to see which frequency has been set to the simulator.

 

[victoroos]

1 hour ago, aivlasoft said:

Hi Victor,

thanks for the good words on EFB.

121.970 is an invalid frequency. Only .975 is valid (for 25 kHz and 8.33 kHz). But anyway, it depends on the radio stack whether it is capable of displaying a frequency like 121.975.

You can check the Server's logfile to see which frequency has been set to the simulator.

 

Okay, I looked at the log. It worked fine. It was 975 indeed. sorry.

 

Aka, I kept troubleshooting, (I always want to do it self ;)).

I updated FSUIPC to v6 (I was still running 5), and that worked like a charm. Apparently was that FSUIPC specifically an error.

 

Thanks for the fast reply. Sorry for bothering