David Posted January 13, 2018 Share Posted January 13, 2018 HI , my name is DAVID I recently switch from FSX to P3D I am not longer used FSX and EFB is working fine on P3D but I have not AI traffic. the AI traffic box is check but still not traffic I think is something to do with FSX it may still getting traffic from FSX and not from P3D ! any suggestion thx. Link to comment Share on other sites More sharing options...
aivlasoft Posted January 14, 2018 Share Posted January 14, 2018 Hi David, did you move the sliders for AI Traffic in P3D slightly to the right? Link to comment Share on other sites More sharing options...
David Posted January 14, 2018 Author Share Posted January 14, 2018 Hi ! Yes it is 100% Link to comment Share on other sites More sharing options...
aivlasoft Posted January 15, 2018 Share Posted January 15, 2018 Did you also check the settings in EFB? Please see the "Installation and configuration" manual. Link to comment Share on other sites More sharing options...
David Posted January 16, 2018 Author Share Posted January 16, 2018 Yes ! I went thru all the manual again and no need to change anything. Just for you to understand I see my plain on the display unit but I don't see any traffic. thx for you help . Link to comment Share on other sites More sharing options...
aivlasoft Posted January 17, 2018 Share Posted January 17, 2018 On 1/14/2018 at 8:16 PM, David said: Yes it is 100% Try to reduce it to 20% (just for a test). If you have 100% traffic and maybe some more add-ons which are running simultaneously and also requesting data from the simulator via SimConnect, it might be that SimConnect does not provide traffic data anymore. You can easily test the origin output of SimConnect using the "AI traffic monitor" from the DataProvider's "Data" menu. This will list all the traffic data received directly from SimConnect. If you see traffic in this list but not on the DisplayUnit than it must be something with the settings. Link to comment Share on other sites More sharing options...
David Posted January 17, 2018 Author Share Posted January 17, 2018 OK Thx . I did what you told me ,I check the traffic on the data provider and see a lot of traffic. then what can I do ? what do you think should I check first on setting ? Link to comment Share on other sites More sharing options...
aivlasoft Posted January 18, 2018 Share Posted January 18, 2018 1) Check the settings ... 2) Press TRFC button Link to comment Share on other sites More sharing options...
David Posted January 18, 2018 Author Share Posted January 18, 2018 It was the TRFC Button ! now I see traffic .thx a lot for your help Link to comment Share on other sites More sharing options...
chumley Posted February 21, 2018 Share Posted February 21, 2018 I fell into the same hole. So used to everything being set after upgrading to the latest version I failed to press the TRFC button. Duh!!!! Link to comment Share on other sites More sharing options...
Recommended Posts