skysurfer Posted September 9, 2015 Share Posted September 9, 2015 Progress. I reinstalled EFB on network PC and unchecked myself Data Probider Option. Now I am able to run Display Unit on networked PC howver Display Unit does not connect to Data Provider. I set everything as described in manual, shared again required all folders. I am able to run Display Unit on FSX PC and I see there is a connection between Data Provider and Display Unit on FSX PC but I cannot neither create not upload any flight planes. Message says: "Create route from flight plan: Origin with ICAO code EGLL is not available in FSX.". So regardless if I try to upload saved route from PFPX or try to create myself or upload from website do not work. Thx Link to comment Share on other sites More sharing options...
aivlasoft Posted September 9, 2015 Author Share Posted September 9, 2015 Hi Edward, the installer has slightly changed, so it does no longer verify whether an installation of either FSX, FSX-SE, or P3D can be located on the target system and therefore the option "DataProvider" is always available when running the installer. It's up to the user to decide whether the DataProvider shall be installed on a target system. The error "object instance not set ..." is fixed with the next version 1.6.2. The problem with the folder name is also fixed with the next version 1.6.2. Re "Display Unit does not connect to Data Provider": Most probably this is an issue with access rights or with the "owner" of the folder. Re ""Create route from flight plan: Origin with ICAO code EGLL is not available in FSX": Did you run the scenery data update so the DataProvider could recreate the EFB database? Link to comment Share on other sites More sharing options...
Philippe 06370 Posted September 9, 2015 Share Posted September 9, 2015 Hi Urs Where we can find the version 1.6.2 Perhaps this version solves my problem ? Best regards Link to comment Share on other sites More sharing options...
skysurfer Posted September 9, 2015 Share Posted September 9, 2015 Thanks for the reply. 1)Re "Display Unit does not connect to Data Provider": Most probably this is an issue with access rights or with the "owner" of the folder. I gave the rights to the folder and shared it as before. It was not an issue in older version. 2) Re ""Create route from flight plan: Origin with ICAO code EGLL is not available in FSX": Did you run the scenery data update so the DataProvider could recreate the EFB database? Yes and it looked different this time. So ran scenery update and update progress began. At the end of updating that dark Data Provider screen closed and Setting window opened. When I clicked OK then same message popped up to select correct flight plan folder. Looked like update was not successful. Thx Link to comment Share on other sites More sharing options...
GG_Flyer Posted September 10, 2015 Share Posted September 10, 2015 Phillipe, 1.6.2 is not yet released - it is under development, and should be released in a few days. Edward, Thank you for your feedback - we have not experienced what you've described. We will investigate. (For assistance, could you email us a ZIP file with the PLN file you mention?) Regards, Link to comment Share on other sites More sharing options...
Tokitaumelie Posted September 10, 2015 Share Posted September 10, 2015 Hi Edward, the installer has slightly changed, so it does no longer verify whether an installation of either FSX, FSX-SE, or P3D can be located on the target system and therefore the option "DataProvider" is always available when running the installer. It's up to the user to decide whether the DataProvider shall be installed on a target system. The error "object instance not set ..." is fixed with the next version 1.6.2. The problem with the folder name is also fixed with the next version 1.6.2. Re "Display Unit does not connect to Data Provider": Most probably this is an issue with access rights or with the "owner" of the folder. Re ""Create route from flight plan: Origin with ICAO code EGLL is not available in FSX": Did you run the scenery data update so the DataProvider could recreate the EFB database? Hi Urs, Travis Trust all is well. Wow, this is great news. Does this mean I can now install EFB separately on a tablet, same network? If it is then thank you for the progressive change. If not then no problems either. I'm running 1.6.0 now on Windows 10 Build 10532, all is well! Looking forward to 1.6.2. Thanks again for the work done Regards Pauga Link to comment Share on other sites More sharing options...
skysurfer Posted September 10, 2015 Share Posted September 10, 2015 Phillipe, 1.6.2 is not yet released - it is under development, and should be released in a few days. Edward, Thank you for your feedback - we have not experienced what you've described. We will investigate. (For assistance, could you email us a ZIP file with the PLN file you mention?) Regards, OK. Sent. Thx Link to comment Share on other sites More sharing options...
skysurfer Posted September 10, 2015 Share Posted September 10, 2015 "(For assistance, could you email us a ZIP file with the PLN file you mention?)" Travis. The problem is not just in those PLN files, I cannot even select route in Display Unit in Route setup tab. I selected VAT route and Route Finder and tried to upload routes from those websites but it still generate that ICAO error message. Looks to me it is not just my saved PLN route files. Interesting it still fails FSX;SE path however the sim path is correct: Link to comment Share on other sites More sharing options...
Feuerkurt Posted September 10, 2015 Share Posted September 10, 2015 Hello, as a Newbie to this forum I would like to say hallo to everyone and give also a feedback to Version 1.6.1. I am running Efb on a network with Dataprovider on main computer and Displayunit on a laptop. I had the same problem with the installation path. After removing the last backslash behind "FSX" everything is working fine and all data were created. However: I am not able anymore to import flightplans from Flightsim Commander 9.6. It states "Flightplan not valid". With 1.5.1 it worked perfect. It's not a big issue, because I can simply load a FSX flightplan. Everything else is running fine. Regards, Kurt Link to comment Share on other sites More sharing options...
sumnersd Posted September 10, 2015 Share Posted September 10, 2015 I try to download 1.6 but I get a page not found error. thanks S. Sumner Link to comment Share on other sites More sharing options...
skysurfer Posted September 10, 2015 Share Posted September 10, 2015 Hello, as a Newbee to this forum I would like to say hallo to everyone and give also a feedback to Version 1.6.1. I am running Efb on a network with Dataprovider on main computer and Displayunit on a laptop. I had the same problem with the installation path. After removing the last backslash behind "FSX" everything is working fine and all data were created. However: I am not able anymore to import flightplans from Flightsim Commander 9.6. It states "Flightplan not valid". With 1.5.1 it worked perfect. It's not a big issue, because I can simply load a FSX flightplan. Everything else is running fine. Regards, Kurt Kurt. Nice catch. Removing backslash fixed the problem. I am able to load flight plan from PFPX now. sceneries loaded as before normally. With that slash after FSX scenery updater did not even ran. All sceneries work fine except LLBG, that one was installed from Dovetail within Steam platform. I was able to fix it long time ago but I forgot how I did it. It is a matter of time now. I was able to fix connection in network PC as well, the issue was my IP address, for some reason IP address did not hold in setting, it was dropping. Looks like it stabilized now. Everything is working. Will keep testing. Thx Kurt and to everyone here. Link to comment Share on other sites More sharing options...
Feuerkurt Posted September 10, 2015 Share Posted September 10, 2015 Edward, thanks and pleased to hear, that I helped to solve the issue with the installation path. Link to comment Share on other sites More sharing options...
skysurfer Posted September 11, 2015 Share Posted September 11, 2015 Question. Some of my add-on sceneries in Display Unit do not match to what is in FSX. LLBG, EHAM and LFPG one of them. It looks normal in FSX (and on Jepp charts) but not in Display Unit. I wonder if this is something to do with scenery cfg folder. Thx Link to comment Share on other sites More sharing options...
Feuerkurt Posted September 11, 2015 Share Posted September 11, 2015 Hi Edward, no guarantee, but give it a try: Your scenery.cfg-Path is C:\Users\Admin\... Sometimes FSX-SE stores the relevant scenery.cfg in C:\Users\All Users\... So it is possible, that Efb simply reads the wrong scenery.cfg. Hope that helps, Kurt Link to comment Share on other sites More sharing options...
aivlasoft Posted September 11, 2015 Author Share Posted September 11, 2015 Hi all, this is the download link of the latest public beta version 1.6.2. Please report any anomalies herein. Thanks. http://www.aivlasoft.com/DPYZHbwca65FnjabRYHbf0pL8/AivlaSoft.Efb.Setup_v1.6.2.exe.zip Link to comment Share on other sites More sharing options...
Tokitaumelie Posted September 13, 2015 Share Posted September 13, 2015 Hi all, this is the download link of the latest public beta version 1.6.2. Please report any anomalies herein. Thanks. http://www.aivlasoft.com/DPYZHbwca65FnjabRYHbf0pL8/AivlaSoft.Efb.Setup_v1.6.2.exe.zip Thank you Urs Installed fine and working fine - Windows 10 x64 IP Build 10532 Primarily nit-picking however just a text overlay issue. Thanks for the work done and regards Pauga Link to comment Share on other sites More sharing options...
sprowse Posted September 13, 2015 Share Posted September 13, 2015 Hi all, this is the download link of the latest public beta version 1.6.2. Please report any anomalies herein. Thanks. http://www.aivlasoft.com/DPYZHbwca65FnjabRYHbf0pL8/AivlaSoft.Efb.Setup_v1.6.2.exe.zip Cannot read/open PDF files that are stored the user's library using the DU...Modules....Library. Using Adobe DC latest version, installed on root drive. Operating system W10 home edition, all current updates installed. Other than this issue everything seems to OK. Steve Link to comment Share on other sites More sharing options...
aivlasoft Posted September 13, 2015 Author Share Posted September 13, 2015 Hi Steve, thanks for the report. When I try to reproduce it on a Win10 computer then a message box appears which asks whether I want to download or to open the pdf-file. From my point of view this is the default message box from Internet Explorer when clicking on a pdf link. After selecting "open", the IE browser window opens and shows the pdf-file content. Can you confirm that this is more or less the same behavior on your computer? Link to comment Share on other sites More sharing options...
aivlasoft Posted September 13, 2015 Author Share Posted September 13, 2015 @ Pauga, thanks for your report. I verified that it's a 1.5.x bug already, so nothing which has to do with Win10. Will have a look at it, but only if there are some more bugs to fix because of Win10. Link to comment Share on other sites More sharing options...
sprowse Posted September 14, 2015 Share Posted September 14, 2015 Hi Steve, thanks for the report. When I try to reproduce it on a Win10 computer then a message box appears which asks whether I want to download or to open the pdf-file. From my point of view this is the default message box from Internet Explorer when clicking on a pdf link. After selecting "open", the IE browser window opens and shows the pdf-file content. Can you confirm that this is more or less the same behavior on your computer? What you have reported above happens if Adobe reader DC is not installed. If however it is installed the pdf page opens but is blank after a few seconds the DU will stop working. Below, is the generated error report: Log Name: Application Source: Application Error Date: 9/13/2015 7:10:36 PM Event ID: 1000 Task Category: (100) Level: Error Keywords: Classic User: N/A Computer: ADMIN Description: Faulting application name: AivlaSoft.Efb.DisplayUnit.exe, version: 1.6.2.0, time stamp: 0x55f2da5b Faulting module name: AcroPDFImpl.dll_unloaded, version: 15.7.20033.2203, time stamp: 0x5507d6f6 Exception code: 0xc0000005 Fault offset: 0x00030b84 Faulting process id: 0x1c90 Faulting application start time: 0x01d0ee14bd7a0bec Faulting application path: C:\AivlaSoft\AivlaSoft.Efb.DisplayUnit.exe Faulting module path: AcroPDFImpl.dll Report Id: f478077e-a6e2-4e68-abc5-10951b8a2b8a Faulting package full name: Faulting package-relative application ID: Event Xml: <Event xmlns= <System> <Provider Name="Application Error" /> <EventID Qualifiers="0">1000</EventID> <Level>2</Level> <Task>100</Task> <Keywords>0x80000000000000</Keywords> <TimeCreated SystemTime="2015-09-13T11:10:36.000000000Z" /> <EventRecordID>6254</EventRecordID> <Channel>Application</Channel> <Computer>ADMIN</Computer> <Security /> </System> <EventData> <Data>AivlaSoft.Efb.DisplayUnit.exe</Data> <Data>1.6.2.0</Data> <Data>55f2da5b</Data> <Data>AcroPDFImpl.dll_unloaded</Data> <Data>15.7.20033.2203</Data> <Data>5507d6f6</Data> <Data>c0000005</Data> <Data>00030b84</Data> <Data>1c90</Data> <Data>01d0ee14bd7a0bec</Data> <Data>C:\AivlaSoft\AivlaSoft.Efb.DisplayUnit.exe</Data> <Data>AcroPDFImpl.dll</Data> <Data>f478077e-a6e2-4e68-abc5-10951b8a2b8a</Data> <Data> </Data> <Data> </Data> </EventData> </Event> Hope this helps Steve Link to comment Share on other sites More sharing options...
aivlasoft Posted September 14, 2015 Author Share Posted September 14, 2015 Hi Steve, you're right, on my machine wasn't a copy of Adobe Reader DC. I have downloaded the latest version from here: https://get.adobe.com/reader/otherversions/ with the following options: Then I restarted the computer, started the DisplayUnit and loaded a pdf-document. No problems so far, the browser control showed the document properly. Maybe you try to update the Adobe Reader DC to the same version? Link to comment Share on other sites More sharing options...
air320 Posted September 14, 2015 Share Posted September 14, 2015 good evening i have troubles with AIVLA EFB. Installer is running without any problems. DataProvider initialize and runs without problems. But starting the DISPLAY UNIT always the same error shows up. _________________________________________________________________________________________________ System.InvalidOperationException: Cannot accept new outgoing messages because status is unequal to 'running'. bei eg.a(Byte[] A_0) bei eo.a(Byte[] A_0) bei zp.b(Byte[] A_0) bei ze.j(Byte[] A_0) bei yh.a() bei xf.ac() bei vg.e() bei va.am() bei rd.b() bei rd.b(Object A_0) ************** Geladene Assemblys **************mscorlib Assembly-Version: 4.0.0.0. Win32-Version: 4.6.96.0 built by: NETFXREL2STAGE. CodeBase: file:///C:/Windows/Microsoft.NET/Framework/v4.0.30319/mscorlib.dll.----------------------------------------AivlaSoft.Efb.DisplayUnit Assembly-Version: 1.6.2.26435. Win32-Version: 1.6.2.0. CodeBase: file:///D:/Spiele/Lockheed%20Martin/Downloads/AIVLA%20EFB%20Software/EFB/AivlaSoft.Efb.DisplayUnit.exe.----------------------------------------System.Core Assembly-Version: 4.0.0.0. Win32-Version: 4.6.79.0 built by: NETFXREL2. CodeBase: file:///C:/WINDOWS/Microsoft.Net/assembly/GAC_MSIL/System.Core/v4.0_4.0.0.0__b77a5c561934e089/System.Core.dll.----------------------------------------System Assembly-Version: 4.0.0.0. Win32-Version: 4.6.79.0 built by: NETFXREL2. CodeBase: file:///C:/WINDOWS/Microsoft.Net/assembly/GAC_MSIL/System/v4.0_4.0.0.0__b77a5c561934e089/System.dll.----------------------------------------System.Windows.Forms Assembly-Version: 4.0.0.0. Win32-Version: 4.6.79.0 built by: NETFXREL2. CodeBase: file:///C:/WINDOWS/Microsoft.Net/assembly/GAC_MSIL/System.Windows.Forms/v4.0_4.0.0.0__b77a5c561934e089/System.Windows.Forms.dll.----------------------------------------System.Drawing Assembly-Version: 4.0.0.0. Win32-Version: 4.6.79.0 built by: NETFXREL2. CodeBase: file:///C:/WINDOWS/Microsoft.Net/assembly/GAC_MSIL/System.Drawing/v4.0_4.0.0.0__b03f5f7f11d50a3a/System.Drawing.dll.----------------------------------------Castle.Windsor Assembly-Version: 3.3.0.0. Win32-Version: 3.3.0.2412. CodeBase: file:///D:/Spiele/Lockheed%20Martin/Downloads/AIVLA%20EFB%20Software/EFB/Castle.Windsor.DLL.----------------------------------------DevExpress.BonusSkins.v15.1 Assembly-Version: 15.1.5.0. Win32-Version: 15.1.5.0. CodeBase: file:///D:/Spiele/Lockheed%20Martin/Downloads/AIVLA%20EFB%20Software/EFB/DevExpress.BonusSkins.v15.1.DLL.----------------------------------------DevExpress.Utils.v15.1 Assembly-Version: 15.1.5.0. Win32-Version: 15.1.5.0. CodeBase: file:///D:/Spiele/Lockheed%20Martin/Downloads/AIVLA%20EFB%20Software/EFB/DevExpress.Utils.v15.1.DLL.----------------------------------------AivlaSoft.Efb.Common Assembly-Version: 1.6.2.26434. Win32-Version: 1.6.2.0. CodeBase: file:///D:/Spiele/Lockheed%20Martin/Downloads/AIVLA%20EFB%20Software/EFB/AivlaSoft.Efb.Common.DLL.----------------------------------------Castle.Core Assembly-Version: 3.3.0.0. Win32-Version: 3.3.3.2300. CodeBase: file:///D:/Spiele/Lockheed%20Martin/Downloads/AIVLA%20EFB%20Software/EFB/Castle.Core.DLL.----------------------------------------DevExpress.Data.v15.1 Assembly-Version: 15.1.5.0. Win32-Version: 15.1.5.0. CodeBase: file:///D:/Spiele/Lockheed%20Martin/Downloads/AIVLA%20EFB%20Software/EFB/DevExpress.Data.v15.1.DLL.----------------------------------------DevExpress.XtraEditors.v15.1 Assembly-Version: 15.1.5.0. Win32-Version: 15.1.5.0. CodeBase: file:///D:/Spiele/Lockheed%20Martin/Downloads/AIVLA%20EFB%20Software/EFB/DevExpress.XtraEditors.v15.1.DLL.----------------------------------------AivlaSoft.Efb.WeatherServices Assembly-Version: 1.6.0.0. Win32-Version: 1.6.0.0. CodeBase: file:///D:/Spiele/Lockheed%20Martin/Downloads/AIVLA%20EFB%20Software/EFB/AivlaSoft.Efb.WeatherServices.DLL.----------------------------------------System.Configuration Assembly-Version: 4.0.0.0. Win32-Version: 4.6.79.0 built by: NETFXREL2. CodeBase: file:///C:/WINDOWS/Microsoft.Net/assembly/GAC_MSIL/System.Configuration/v4.0_4.0.0.0__b03f5f7f11d50a3a/System.Configuration.dll.----------------------------------------System.Xml Assembly-Version: 4.0.0.0. Win32-Version: 4.6.79.0 built by: NETFXREL2. CodeBase: file:///C:/WINDOWS/Microsoft.Net/assembly/GAC_MSIL/System.Xml/v4.0_4.0.0.0__b77a5c561934e089/System.Xml.dll.----------------------------------------mscorlib.resources Assembly-Version: 4.0.0.0. Win32-Version: 4.6.79.0 built by: NETFXREL2. CodeBase: file:///C:/WINDOWS/Microsoft.Net/assembly/GAC_MSIL/mscorlib.resources/v4.0_4.0.0.0_de_b77a5c561934e089/mscorlib.resources.dll.----------------------------------------System.Data Assembly-Version: 4.0.0.0. Win32-Version: 4.6.79.0 built by: NETFXREL2. CodeBase: file:///C:/WINDOWS/Microsoft.Net/assembly/GAC_32/System.Data/v4.0_4.0.0.0__b77a5c561934e089/System.Data.dll.----------------------------------------UIAutomationClient Assembly-Version: 4.0.0.0. Win32-Version: 4.6.79.0 built by: NETFXREL2. CodeBase: file:///C:/WINDOWS/Microsoft.Net/assembly/GAC_MSIL/UIAutomationClient/v4.0_4.0.0.0__31bf3856ad364e35/UIAutomationClient.dll.----------------------------------------WindowsBase Assembly-Version: 4.0.0.0. Win32-Version: 4.6.79.0 built by: NETFXREL2. CodeBase: file:///C:/WINDOWS/Microsoft.Net/assembly/GAC_MSIL/WindowsBase/v4.0_4.0.0.0__31bf3856ad364e35/WindowsBase.dll.----------------------------------------Anonymously Hosted DynamicMethods Assembly Assembly-Version: 0.0.0.0. Win32-Version: 4.6.96.0 built by: NETFXREL2STAGE. CodeBase: file:///C:/WINDOWS/Microsoft.Net/assembly/GAC_32/mscorlib/v4.0_4.0.0.0__b77a5c561934e089/mscorlib.dll.----------------------------------------DevExpress.XtraGrid.v15.1 Assembly-Version: 15.1.5.0. Win32-Version: 15.1.5.0. CodeBase: file:///D:/Spiele/Lockheed%20Martin/Downloads/AIVLA%20EFB%20Software/EFB/DevExpress.XtraGrid.v15.1.DLL.----------------------------------------System.ComponentModel.DataAnnotations Assembly-Version: 4.0.0.0. Win32-Version: 4.6.79.0. CodeBase: file:///C:/WINDOWS/Microsoft.Net/assembly/GAC_MSIL/System.ComponentModel.DataAnnotations/v4.0_4.0.0.0__31bf3856ad364e35/System.ComponentModel.DataAnnotations.dll.----------------------------------------AivlaSoft.Efb.IFlightplanHandler Assembly-Version: 1.6.0.0. Win32-Version: 1.6.0.0. CodeBase: file:///D:/Spiele/Lockheed%20Martin/Downloads/AIVLA%20EFB%20Software/EFB/AivlaSoft.Efb.IFlightplanHandler.DLL.----------------------------------------AivlaSoft.FlightPlanHandlers.AAXE Assembly-Version: 1.6.0.0. Win32-Version: 1.6.0.0. CodeBase: file:///D:/Spiele/Lockheed%20Martin/Downloads/AIVLA%20EFB%20Software/EFB/plugins/AivlaSoft.FlightPlanHandlers.AAXE.dll.----------------------------------------Microsoft.VisualBasic Assembly-Version: 10.0.0.0. Win32-Version: 14.6.79.0 built by: NETFXREL2. CodeBase: file:///C:/WINDOWS/Microsoft.Net/assembly/GAC_MSIL/Microsoft.VisualBasic/v4.0_10.0.0.0__b03f5f7f11d50a3a/Microsoft.VisualBasic.dll.----------------------------------------System.Web Assembly-Version: 4.0.0.0. Win32-Version: 4.6.79.0 built by: NETFXREL2. CodeBase: file:///C:/WINDOWS/Microsoft.Net/assembly/GAC_32/System.Web/v4.0_4.0.0.0__b03f5f7f11d50a3a/System.Web.dll.----------------------------------------AivlaSoft.FlightPlanHandlers.FSC Assembly-Version: 1.6.0.0. Win32-Version: 1.6.0.0. CodeBase: file:///D:/Spiele/Lockheed%20Martin/Downloads/AIVLA%20EFB%20Software/EFB/plugins/AivlaSoft.FlightPlanHandlers.FSC.dll.----------------------------------------AivlaSoft.FlightPlanHandlers.iFly Assembly-Version: 1.6.0.0. Win32-Version: 1.6.0.0. CodeBase: file:///D:/Spiele/Lockheed%20Martin/Downloads/AIVLA%20EFB%20Software/EFB/plugins/AivlaSoft.FlightPlanHandlers.iFly.dll.----------------------------------------AivlaSoft.FlightPlanHandlers.ISG Assembly-Version: 1.6.0.0. Win32-Version: 1.6.0.0. CodeBase: file:///D:/Spiele/Lockheed%20Martin/Downloads/AIVLA%20EFB%20Software/EFB/plugins/AivlaSoft.FlightPlanHandlers.ISG.dll.----------------------------------------AivlaSoft.FlightPlanHandlers.KML Assembly-Version: 1.6.0.0. Win32-Version: 1.6.0.0. CodeBase: file:///D:/Spiele/Lockheed%20Martin/Downloads/AIVLA%20EFB%20Software/EFB/plugins/AivlaSoft.FlightPlanHandlers.KML.dll.----------------------------------------AivlaSoft.FlightPlanHandlers.LevelD Assembly-Version: 1.6.0.0. Win32-Version: 1.6.0.0. CodeBase: file:///D:/Spiele/Lockheed%20Martin/Downloads/AIVLA%20EFB%20Software/EFB/plugins/AivlaSoft.FlightPlanHandlers.LevelD.dll.----------------------------------------AivlaSoft.FlightplanHandlers.MsFs Assembly-Version: 1.6.0.0. Win32-Version: 1.6.0.0. CodeBase: file:///D:/Spiele/Lockheed%20Martin/Downloads/AIVLA%20EFB%20Software/EFB/plugins/AivlaSoft.FlightplanHandlers.MsFs.dll.----------------------------------------AivlaSoft.FlightplanHandlers.P3D Assembly-Version: 1.6.0.0. Win32-Version: 1.6.0.0. CodeBase: file:///D:/Spiele/Lockheed%20Martin/Downloads/AIVLA%20EFB%20Software/EFB/plugins/AivlaSoft.FlightplanHandlers.P3D.dll.----------------------------------------AivlaSoft.FlightPlanHandlers.PmdgRte Assembly-Version: 1.6.0.0. Win32-Version: 1.6.0.0. CodeBase: file:///D:/Spiele/Lockheed%20Martin/Downloads/AIVLA%20EFB%20Software/EFB/plugins/AivlaSoft.FlightPlanHandlers.PmdgRte.dll.----------------------------------------AivlaSoft.FlightplanHandlers.ProSim737 Assembly-Version: 1.6.0.0. Win32-Version: 1.6.0.0. CodeBase: file:///D:/Spiele/Lockheed%20Martin/Downloads/AIVLA%20EFB%20Software/EFB/plugins/AivlaSoft.FlightplanHandlers.ProSim737.dll.----------------------------------------AivlaSoft.FlightplanHandlers.SimAvionics Assembly-Version: 1.6.0.0. Win32-Version: 1.6.0.0. CodeBase: file:///D:/Spiele/Lockheed%20Martin/Downloads/AIVLA%20EFB%20Software/EFB/plugins/AivlaSoft.FlightplanHandlers.SimAvionics.dll.----------------------------------------DevExpress.XtraRichEdit.v15.1 Assembly-Version: 15.1.5.0. Win32-Version: 15.1.5.0. CodeBase: file:///D:/Spiele/Lockheed%20Martin/Downloads/AIVLA%20EFB%20Software/EFB/DevExpress.XtraRichEdit.v15.1.DLL.----------------------------------------DevExpress.RichEdit.v15.1.Core Assembly-Version: 15.1.5.0. Win32-Version: 15.1.5.0. CodeBase: file:///D:/Spiele/Lockheed%20Martin/Downloads/AIVLA%20EFB%20Software/EFB/DevExpress.RichEdit.v15.1.Core.DLL.----------------------------------------DevExpress.Office.v15.1.Core Assembly-Version: 15.1.5.0. Win32-Version: 15.1.5.0. CodeBase: file:///D:/Spiele/Lockheed%20Martin/Downloads/AIVLA%20EFB%20Software/EFB/DevExpress.Office.v15.1.Core.DLL.----------------------------------------System.Drawing.resources Assembly-Version: 4.0.0.0. Win32-Version: 4.6.79.0 built by: NETFXREL2. CodeBase: file:///C:/WINDOWS/Microsoft.Net/assembly/GAC_MSIL/System.Drawing.resources/v4.0_4.0.0.0_de_b03f5f7f11d50a3a/System.Drawing.resources.dll.----------------------------------------System.Windows.Forms.resources Assembly-Version: 4.0.0.0. Win32-Version: 4.6.79.0 built by: NETFXREL2. CodeBase: file:///C:/WINDOWS/Microsoft.Net/assembly/GAC_MSIL/System.Windows.Forms.resources/v4.0_4.0.0.0_de_b77a5c561934e089/System.Windows.Forms.resources.dll.---------------------------------------- ************** JIT-Debuggen **************Um das JIT-Debuggen (Just-In-Time) zu aktivieren, muss in derKonfigurationsdatei der Anwendung oder des Computers(machine.config) der jitDebugging-Wert im Abschnitt system.windows.forms festgelegt werden.Die Anwendung muss mit aktiviertem Debuggen kompiliert werden. Zum Beispiel: <configuration> <system.windows.forms jitDebugging="true" /></configuration> __________________________________________________________________________________________________ In the DATA PROVIDER display following error: Connection to 127.0.0.1 terminated, caused by: TimeoutSND PLEASE have anyone an idea whats going on !!!! Thanks for your reply. Brgds Link to comment Share on other sites More sharing options...
helix1250 Posted September 14, 2015 Share Posted September 14, 2015 Just to give Urs and Travis some feed back, I have been running 1.6.0 since its release and not had any issues in functionality or stability. I just installed 1.6.2, but it appears I have reached the end of my trial period. But to conclude for me 1.6.x installed and functioned correctly, I am still waiting for the Aerosoft Airbus update so could not confirm if there fix had a knock on effect to EFB. Regards Rob Link to comment Share on other sites More sharing options...
bcbarnes Posted September 14, 2015 Share Posted September 14, 2015 More positive feedback for 1.6.2 - working beautifully on an upgraded system Win 8.2 -> Win 10, and the one problem I reported adding alternate airports is fixed. Great job. Brian. Link to comment Share on other sites More sharing options...
va3fyc Posted September 14, 2015 Share Posted September 14, 2015 Works great here as well, 1.6.2 Windows 10, with all the original fonts installed. Thanks Urs and Travis! Link to comment Share on other sites More sharing options...
Recommended Posts