rgbalzaretti
Members-
Posts
16 -
Joined
Everything posted by rgbalzaretti
-
Thank you very much for your prompt and informative response. I followed your instructions and the server protocol gave the Airfile Name for the PA28R Arrow as p28s when loading the SIM with it. With that information, I was able to load the profile into the client without any further problems. Once again, Thank you very much for your help! R. George Balzaretti
-
When selecting the Justflight PA-28R Turbo Arrow 3 in the client profile, the corresponding AIR file for it is not showing in the folder at all. The XML file shows p28r. I renamed the XML to match p28r but still no AIR file is showing. What else can I try for the client keeping that profile once the plane is loaded from the SIM accordingly instead of changing it to the Default one? Thanks. R. George Balzaretti Running version of MSFS2020 1.26.5.0
-
Client no longer able to load the selected profile!
rgbalzaretti replied to rgbalzaretti's topic in EFB v2 - Support forum
Hi Oskar, Thank you much for your expert reply! By following your indications as well as editing the DC6.profile.XLM file accordingly, I was able to load, once and for all, the DC6 profile successfully. I also read the other posts on the issue and learned a few things on this subject. Once again, I am very grateful for your help and support. Cordially, Rolando George Balzaretti -
Client no longer able to load the selected profile!
rgbalzaretti replied to rgbalzaretti's topic in EFB v2 - Support forum
Although the Airplane Profile automatically loads any of the other planes I fly (ex: JustFlight PA28R Arrow III - ASOBO TBM930) still does not do it for the PMDG DC-6B, No matter what I tried, nothing really works, I even tried to edit the xml file and see what's in it, but no luck. Anyway, this is what I did in trying to solve the PMDG DC-6B not loading. 1. Uninstalled both Server & Client. 2. Removed all folders from documents and program files directories and boot the computer. 3 Install the Server software. 4. Update the software data through Navigraph Data Manager. 5. Ran the DBBuilder. 6. Installed the Client. That was it! I certainly do not have any further clue as to what to try next. Can you help out please? One final question. Would it make any difference to have from now on the Default Profile loaded instead. Thank you, Rolando George Balzaretti -
Hello everyone, I update both, client and server software with Build #132the and the selected profile is not longer kept. It goes back to "Default Profile" instead. I have had this problem before in the past and I was able to solve it by creating a new profile from scratch keeping in mind the .air file name. But now nothing happens! Is there something else I should try please? In addition, the ETA filed along with the others is not computing accurately. It goes backguards, instead of telling how much distance is left for the arrival , it keep adding the distance... Can you help out please? Thank you, Rolando George BalzarettI
-
Hello, I haven't been able to have the Gyro Pilot device to follow the magenta line of the flight plan. Is this and issue related to the flight plan itself or PMDG DC-6 issue? Also the DC-6 default profile never loads, it cannot find it even thou it is there. Also is this an EFBv2 issue or and DC-6 one? Thasnk you, Rolando George Balzaretti
-
Oskar, Thank you very much for your valuable information. Yes, I tried V.2.14 and all went back to normal again. Even my Pilot2ATC, that usually runs in conjunction with EFB2, went back to normal after the 2.14 upgrade as well. Curious: Where or how did you learn about this bug? Gratefully, Rolando George Balzaretti Loxahatchee, Florida
-
No matter what I tried the Created FP does not load into the plane's GPS as it should. I changed folder's location several times with the idea that the location might have something to do with it but no FP gets loaded still. Checked all Aivlasoft forums, the manuals, the "whole Universe" and NOTHING put a light into the problem. My level of frustration, at this point, is immense, to say the least! I have tried loading old FP's and created new ones as well, and it did not take anywhere still. Running the latest version 2.2 build # 130 for both Server and Client. They are both located in the same computer. They also run with the administrator option checked, if that makes a difference. Run WINDOWS 11 PRO, MSFS2020 v1.21.13.0 and FSUIPC V7.2.13. JustFlight Arrow III with GS530 unit. I also tried other airplanes like the stock Cessna 172 (GS530 as well) and got the same problem... What the heck can I do? Please help me out... Thank you very much! Rolando George Balzaretti george@webnetusa.net
-
I am experiencing lots of difficulties after I upgrade MSFS2020 with Update 6. For one thing I cannot create a new flight plan any longer. An any existing flight plans do not properly load into the simulator like before. Is there a fix for this or perhaps a new update coming soon for both the Server and the Client? Thank you George
-
Is it possible to create a FPL to include one airport landing for refueling (and leg stretching) before reaching the final destination? So far I create two FPL's, one is made from point A to B (the airport to refuel my plane) and the other FPL is from Point B to C (the destination Airport). However, this approach doesn't seem to be very practical to me. Anyway, is there a way to create one single FPL, to include an airport to descend in between? If there is, I certainly would like to know how to do that! Thank you, George Edit: Moved to proper forum by Admin
-
I purchased 1S2 DARRINGTON MUNI from ORBX , and after I updated the database still, it is not showing at all! Even, if I create a flight plan in MSFS2020, say, from 1S2 to PAKT, and Uplink it to EBF2, it will come up with errors in waypoints, etc. and it would not process. Is there a fix for that? Thank you! George
-
I just got the Flight1 GNS 430-530 unit and I load it into my planes, A2A Cessna 182T and Carenado PA46 Malibu both for P3D v4. Although, I have the "Load/Update Garmin GPS System" option checked in the miscellaneous settings, still it does no guide the aircraft correctly. Is there any addition or update I should have to have in order to make this new addition to work correctly? Many thanks, R. George Balzaretti EFB Data Provider version 1.6.14.13978. License type: Full
-
I am using prepar3d v2.5 with EFB version 1.5. So far everything has worked flawlessly. One question thou, when selecting the destination airport, can the runway and the gate be selected as part of the flight plan making? And If it is possible to do that, how do you do it? Thank you, R. George Balzaretti