Captain45
-
Posts
44 -
Joined
-
Last visited
Posts posted by Captain45
-
-
After a complete rebuild of my 'FS-SERVER' PC and install of the latest build, I have the issue that the Client (unchainged on a networked PC) keeps on waiting for the Server. The PC name of the server is correct and the port numbers are the same on both. Windows Defender has approvement for the Server.
This really puzzles me, although I had something like this in the past. Can't remember what the solution was.
Help will be very much appreciated.
It's the same as in Nov.'21. But this time I changed the portnumber on both into #51465 which worked back then but not now. Still 'waiting' after restart both.
Got it!!!
In Defender/Advanced/Rules incoming there were 4 entries for AivlaSoftEFB-Server. Two of them were blocked. Made them active 'et voilá' it works. Pffftt.
Dirk
-
18 hours ago, aivlasoft said:
Maybe some kind of anti virus software, auto backup software, or similar which has its 'hands' on the file?
Could be. I recently installed Proton Drive and that one might be the cause. Cannot think of anything else. To get rid of the open file issue I uninstalled and re-installed the client. It looks as if the problem is solved.
-
When I startup the client I get a popup reading:
'No access to the file ...clientlogfile.txt because it is in use by another proces.
Sometimes it helps to restart the PC, but sometimes not and I have to restart the PC again.
It's something that happens the last few days and never before.
The client runs on a networked PC.
I am 100% sure that I ended the previous session in a normal way.
-
Hi,
Thanks for the insights. If you are using RDPresets EHRD on P3Dv.5 and not having a chart without taxiways, the troubles I had was probably by P3Dv4.5. Still... I consider it not very professional that RDPresets is not continuing support on P3D and have not tested with AivlaSoft EFB.
Dirk
-
Hi Urs,
I bought this product and after install I had a display in the EFB without taxiways and 'APT Filter OFF' in the top right corner.
The producer wrote that they never have tested their product on AIvlaSoft EFB which I consider a bl....y shame.
They have even abandoned P3D and are probably focussing on MSFS and do no longer support P3D. "Sort it out yourself", was the kind answer.
I uninstalled the thing and put it in the trashcan.
Just one question.... "Am I right that the APT Filter OFF message is because the AFCAD is incorrect?" and "Is there a difference for AivlaSoft in the way it handles AFCADs in P3Dv4 and P3Dv5?"
Would be nice to know. After all I have spent a reasonable amount of time to get it work.
All the best,
Dirk
-
Sorry folks. I found the solution myself. Server and client were on different port numbers. I updated the clientSettings.txt to make it work.
-
Hi Oskar,
You are absolutely right. In today's flight KJFK - KSFO (when filled in the ETD and EET) there was not so much difference between the planned ETA and the actual ETA. Apperently Simbrief did a nice job in predicting the ETA. That it took 20 min. extra had something to do with RWY10R. Coming from the east that means a large D-tour over the ocean. Planned was 28L or 28R.
Greetings
Dirk
-
Hi Urs,
Thanks for the explanation. To be honest, I use FPLs created by Simbrief, so in step 2 I only insert the flightnumber. So I checked it out for today's flight and indeed, I ccan insert ETD and flight duration/ETA. Flying big iron, fuel on board is more in kgs/lbs than in HH:MM so I leave that one blank.
But....
There are things like earlier or later times of departure, more or less tail- of headwinds aloft, other than planned SIDs and STARs, etc. So what's in the FPL is hardly never leading to a correct ETA. My advice would be, to take the calculated ETA (on the right side of my screen) and use that one in the TAF (left on my screen). Then both are congruent.
Dirk
-
This is really a minor issue, but still... it's incorrect info.
When flying with historical weather, on the APP\Weather\TAF popup I see f.i. 'ETA 09:55z' while on the main screen with the flight info it reads 'EET (ETA) 01:14 (19:12z)'.
I think the program takes the PC time instead of the historical time, or....
it gets the info from ActiveSky and the problem is caused by AS instead of AivlaSoft.
Greetings
Dirk
-
Usually I don't look into the Server log. It's minimized. But because I had problems with UTLive2 I checked. I get this message sometimes 5 times within one minute. Then I see File based weather broadcasted. So it probably found the API.
I run P3Dv4.5 + QW B787 + AivlaSoft Server on one PC (UTLive2 is OFF) and ActiveSky + ASCA + AivlaSoft Client on another networked PC.
On both machines ports 19284 an 19285 are open sending and receiving.
On the server PC the B787 weather radar works 100% and on the AivlaSoft Client it reads WX: ActiveSky so that's ok too.
So, what could be the problem here? Busy local network? It's Gigabit.
Dirk
2020-12-09 EDIT:
I found the answer in another post. But it is still strange that I have to replace 'localhost' by an IP-adress while all comminucations between Server and Client work, including the IP of the client. Of course, that could be another client than the one where ActiveSky is residing.
But this should be on the Server/Settings page below or above the link to the weather file. Probably it would be IP or (better) 'COMPUTERNAME'.to avoid changes in IP's.
-
22 hours ago, lonewulf47 said:
the Waypoint BEFORE WHICH yu want to insert the Customer Wayoint.
Thanks Oskar. Indeed, that is the trick. To be correct, if you have a RWY extended to f.i. 25XT8 and you want a WPT in the APPR before that one, you have to click the 25XT8 (turns green) and then click on the map te be able to select the user WPT.
I fact, that was exactly what I did, but.... DO NOT click the INSERT button on the FPL popup (which was what I did), because then the select is greyed out.
It would be nice if the manual had been more clear on the subject.
Dirk
-
I am running into this problem. When I right click (in the client's APP page for a small airport (SCCY in this case), that has no SIDs, STARS or FIXes, somewhere on a white spot on the chart, there is a popup that shows me f.i. 45 30,5S 071 54,3W. But the function 'insert as route waypoint' is greyed out. So I cannot add that specific point as a waypoint. Especially flying in mountainious areas to small GA airports it is essential that this is possible. The insert function in FPL only accepts Airports, Navaids and Fixes.
However, when I create a flightplan in Simbrief (example attached for SCAP to SCCY) it has that kind of waypoints only. It is just to create a FPL that zigzags through vallyes between high mountains. AivlaSoft can handle that kind of a FPL. It reads WPTs like '*5433S07204W' and the like.
It would be nice if there is a way to make the 'insert as route waypoint' function active by just right clicking on the chart.
Thanks in advance,
Dirk
-
I made a flight with the QW B789 KSEA to KDCA and loaded the SImbrief flightplan in AivlaSoft EFB. Checking the destination airport I saw that the runways are coded in red (too small for the B789). But with low cargo and pax and autobrake at 4 there is more than sufficient RWY to land on. (Checked during approach when filling in the landing data. Didn't even need autobrake max.) So I took the challenge and made the flight with a succesful greaser on RWY 01 and enough RWY left after the full stop on the RWY.
So far, so good. But checking the EFB Client there was no airport displayed. A blank page with only blue AI. This was probably because the length of the longest RWY is shorter than what the B789 needs at MLW. But my aircraft was far below MLW.
I think AivlaSoft EFB takes it a bit too serious in terms of this subject. After all there could have been an emergency situation that makes KDCA the only option when KIAD is not available.
Cheers,
Dirk
-
The flood of protests against Navigraph's idea to cancel FMS Data has had an effect. FMS DATA will continued to be available in the same way it was until today. I think they learned a lesson.
Cheers,
Dirk
Based on their email on today 19th of November
-
Those who are on Navigraph's FMS Data must have received the email with the news that FMS Data will not be available anymore in the near future. They are going to offer only one product: Charts, for (in my case) 8,30 euro (plus 21% VAT) a month. I paid 27,71 euro A YEAR for what I need. Okay, the Jeppesen charts are more detailed than the ones from AivlaSoft EFB. Very true. But I really don't need that detail and what they offer is way above my budget. I think I'm not the only one.
I wrote them an email (like probably a few thousand others) that I will wave 'goodbye' to them and switch to Aerosoft. Soon, in Paderborn champagne is sold out for sure. I sure hope Navigraph will soon realize that they are going to loose a big chunck of customers and so a lot of money. Maybe they come to their sences.
Happy flying,
Dirk
-
Although I am more than happy with v2, there are a few things that can be improved imho.
It could be my PC, but (almost) every time I click away (top right corner) the FPL popup, the whole application is minimized. No problem to click the icon in the task bar to get things back, but 'being convenient' is something else.
It happens to me more than once during a flight that I want to check the DEP and/or ARR pages. That also activates the PROC popup. Many times I don't need that. I just want to check the SID or the STAR data. (my EFB runs on a networked second PC, together with Active Sky). It would be a great improvement (for me, that is and probably many others) when the PROC popup is NOT activated automaticly, but selectable.
Thanks in advance.
Dirk
-
Aha.... well now I understand.
Thanks,
Dirk
-
In v.1 it was not possible to delete a WPT within a STAR. So I was very happy that in v.2 I could delete such a WPT. But...
when I look at the chart both lines to and from the deleted WPT are still there. So, on paper, you fly a crazy zig-zag to that WPT. (Take f.i. the VOR near KJFK that is in many STARs). In real life you will get vectors. Why on earth that VOR is the end of the STAR surprises me, but it's a fact. In the sim I would like to make my own decisions AND, when I delete a WPT, see the outcome in the chart as well.
Minor issue, but nice if corrected.
Cheers,
Dirk
-
Hi Oskar,
I replaced the EHAM minima and the 787-8 and 787-9 profiles with the ones from contributions. I checked the logfile and all works fine now.
During the flight I had serveral red notifications on the Client's status window. Seven or eight times in a flight that took over 3 hours. The Client reconnected automatically. Only when during the rebuild a WPT was passed I needed to do a DIR TO. I haven't got the slightest idea what caused it. Maybe the PC was preparing for the W10 October update that followed later.
Dirk
-
At first a 5 star compliment for v.2. It brings far more than expected and worth while waiting.
Although v.2 works flawless, my yesterdays flight KIAD to EHAM with the QW787 (skipping the ocean NAT) had several server disconnects. Just for the record, I post the logfile attached. I checked if Windows Update was involved during the flight but that was not the case.
Regards,
Dirk
-
Hi Urs,
Thanks for the reply. It is starting to become clear now.
I've found more info on this link that might be usefull for others with the same question.
Greetings
Dirk
-
Although I like the improvements in v.2 versus v.1, there is something that puzzles me cocerning the decision height/altItude. The manual has several pages about 'minimums' but in v.1 I was used to simply read them from the approach chart. It could be usually 50, 200 or 500 for DH. Easy. If v.1 could determine what the value must be for a specific approach based on the AIRAC Data, it must be possible for v.2 as well. If someone can shine a simple light on 'how to determine' this value I would be very gratefull. Oh. and I know I can simple add the field elevation to the DH to get the DA.
Thanks in advamce.
Dirk
-
As a long term user of v1 I thought I give v2 a try for the Demo first.
Installation of the server went well except of the weatherfile because AS is on the other computer and I had not yet made a share. But I installed the Client on the other PC OK and with the Server already running on PC1, the client came alive on PC2 with world weather. (No P3Dv4 active yet)
To access the weatherfile from PC1 I ran into some firewall issues so I had to restart both PC's.
But.... when I start the server I get the popup telling me to open port 13 which was not needed the first time.
So I opened port 13 for outgoing TCP traffic and tried again. Same outcome: a popup that tells me to open port 13 (which is open already)
I'm stuck and the days left are lower and lower.
Would be nice to have a look at v2.
Dirk
-
For those users that run into the same problem:
There was indeed a problem in the bgl file. Hervé Sors has corrected it and the problem will disappear as from the 1803 update.
For those who can't wait I'll attach the correct bgl file in the 'Use alternate airport files' status.
Copy it in the appropriate directory and let the DataProvider run an update.
Cheers,
Dirk
Time issue when on historic date and time after restart
in EFB v2 - Support forum
Posted
I had to pause a flight midway from LGIR to EHAM; saved the flight for doing the rest the next day.
I started P3D on yesterday's date and the time that I saved the flight.
Active Sky was set on the historic date and time.
However...
AivlaSoft EFB had to load the flightplan. No problem. Continued where I stopped yesterday.
But... the time in the top right corner is the system time of the Server PC and not the UTC time that shows on the clock of my B738 cockpit.
Restart the EFB doesn't solve this. I think it's a bug, although a tiny one.
Dirk