Jump to content

fishgoblue

Members
  • Posts

    32
  • Joined

  • Last visited

Everything posted by fishgoblue

  1. Yesterday I used the EFB with no issues. I did and update and now I can not get the server to open because of a message I am getting " Could not start because TPCListener throws an exception. See logfile." How can I get rid of the message and get the server to start up?
  2. So I loaded up at KBJC and followed you instructions and here is a screen shot of what I have in Xplane network and what EFB is showing for my location. I am not sure what is wrong and why it is not tracking in XPlane.
  3. Sorry here are the NEW support txt files. So what I have is my Xplane loaded up and I am in SF34 at KEVW with a Flightplan to KGXY. But the EFB shows that I am at KDEN which is where I ended my lasted tracked flight from when I flew in MSFS. The EFB tracked my flight in MSFS with no issues but when I load up in Xplane it does not show me at the departure airport and does not track anything. Server_202204051425.txt.zip Client_202204051424.txt.zip
  4. AivlaSoft.Efb.SupportFile.exeAivlaSoft.Efb.SupportFile.exe So yesterday Iwas able to use EFB to track my MSFS flight from LAX to DEN. Today I am trying to do a flight from EVW to GXY but the EFB shows me at DEN and does not track my flight or move my airplane to the correct locating. Attached are the support files from that problem.
  5. I was running Xplane. I did uninstall and reinstall EFB and entered my key. Today I loaded up MSFS and FSUIPC7 is running and EFB is not tracking the plane. I loaded up at KLAX and the plane is showing in Zurik. Not sure what else to do.
  6. I did delete and reinstall the data base. guess I'll uninstall everything and try that.
  7. The EFB is locked on my location from where I was when I had a CTD, nothing I do gets it off this location. I have closed everything, restarted everything, restarted the computer and nothing I do fixes this issue. I have done a couple flights since then with no issues other than the EFB not working correctly. How can I fix this issue? fishgoblue
  8. So what I do is I make sure the departure airport is selected and at the top, I open the PROC, and click the performance tab, the aircraft is already selected and everything is correct. I click the Calculate button, I get the calculating please wait popup window and then after it goes away. NOTHING. I am loaded up at the departure runway and I have topcat v 2.74.
  9. yes I have do that and I get the pop up window that shows it is calculating but when I click on the report tab it is blank.
  10. I have a topcat account and I can not get the performance to give me any data. I am sorry but how do I use this feature? I have looked through all the manuals.
  11. I cant include the server one because it says it is too big.
  12. Still having issues where it is like EFB tracking my flight locks up. my plane icon does not move but EFB still tracks the AI planes from traffic global. I know xplane is still sending out network information because the other programs I am using duch as Pilot2ATC and Volanta are still not having tracking issues. So to get EFB to start tracking my flight I have to close the client and the server down and restart then. This happen twice on a flight in xplane from KORD to KBOS and it is supper frustrating. How can I get EFB to track nonstop during flights? Client_202102200606.txt.zip
  13. So I did "phone a friend" and my xplane network is work as expected. I do not have this problem of it stop tracking in the middle of a flight all the time just here and there. The other thing to know is that I am also running Traffic global and it tracks the AI planes the whole time where as my plane is stuck and not following my track but EFB is tracking the AI plane the whole time.
  14. Yes I did it that way too. I did not have anything open while doing this. steps I have done: open Database builder - click on the Xplane database and click Select - Open Server - server shows MSFS at the top(did not change) - click Change button on the right of the server window - it opens Database builder - I click Xplane and the select - it opens Server - Server still shows MSFS. Everything I have done and everything you have said to do does not change the Server from MSFS to Xplane. Yes I am using the correct version of FSUIPC for MSFS, that is not my issue. I am UNABLE to switch the server to xplane.
  15. I have been using EFB v2 for all my xplane flight and here recently I have been using it for MSFS 2020. Today I tried switching back over to Xplane and I opened the Database builder, select my Xplane DB, click select, is shows that XP is selected. Open EFB2 Server as admin, but it is open to MSFS. Even if I click change and go through that process it STILL will not switch over to XP. I even selected the update simulator tab and that did not work either. So how can I get the server to switch over to my XP and will I be able to switch between the 2?
  16. Is it also possible to differentiate between MSFS traffic and Vatsim Traffic? As you can see EFB shows a lot of traffic at KDEN but VATSIM shows very few. Is there or can there be a way to color different traffic?
  17. Would it be possible to have the rings of airport airspace and the restrictions show up on the map when you click the VFR button in the flight plan. When I fly using the EFB client and I am flying VFR it would be nice to see on the map where and what the restriction are so I do get a deviation from ATC. I can look them up on skyvector and I do to plan my flight path, but isn't that what EFB is for to have everything in one place. Just wondering.
  18. I do integrate the procedures into the FLP but I would like to see the VG show the TOD for the say first "AT" 10000 waypoint. So for example if I could manually put in the 10000 "AT" BLOND then that would be the point that the VG starts at and not the FAF.
  19. So a question to add on to this topic, So to use the APP and SID into KLAL as an example, When flying the BLOND5 and the ILS RWY 9, the VG is set to the first waypoint from the runway which is FLYEN "AT" 1700. The BLOND5 has an "AT" 10000 at waypoint BLOND. I understand that if the restrictions from TOD to, say FLYEN are all "AT or ABOVE" said altitude that your glide is set so you are at or above as you descent to FLYEN 1700, but if the SID has an "AT" 10000 at BLOND shouldn't the VG use that as a VG start so your TOD is not passed BLOND? And is there a way to add it to your Flight plan so that it set the VG to THAT point and not FLYEN? I love the VG, just what to better understand ways to utilize it.
  20. Sorry though they got sent direct to support. What I meant by " i am not on vatsim, I am using the A32NX mod. Was that I was not connected to VATSIM, so it would not be reading my aircraft on VATSIM. Server_202101020621.txt.zip Client_202101020621.txt.zip
  21. I do not get the traffic warning any more in Xplane with the last build. However, today I did a flight using the Client and MSFS 2020 and I have the traffic warning the entior flight. I am not on vatsim, I am using the A32NX mod. I read through the above tread and nothing suggested worked. I have 2 screen shot s and I did create a support file. I create a Flight plan through Simbrief and inport it through the client with my Simbrief pilot idea. My callsign is in the info bar on the right and I tried using the ATC soft button on the left. I also tried the TFC filter. Not sure what else to do. Thanks
  22. The first folder it auto selects is my Users/hail2/AppData/Roaming/Microsoft. Which is yellowed out and is the folder that has all my office programs in it.
  23. After updating today I tried to create a MSFS Steam database, but after trying to direct it to my MSFS folder, or what I think is what it is looking for, I still have a yellow box and no option to next. I read through the manual and I looked over the forums for any type of help. So now I am asking for help to get EFB v2 build 121 to work with MSFS 2020.
×
×
  • Create New...